|
|
содержание .. 1316 1317 1318 1319 ..
SRC-120 < DTC/CIRCUIT DIAGNOSIS > [FOR MEXICO] B0094 CRASH ZONE SENSOR Diagnosis Procedure INFOID:0000000009718575 WARNING: • Before servicing, turn ignition switch OFF, disconnect battery negative terminal, and wait at least 3 minutes or more. (To discharge backup capacitor.) • Never use unspecified tester or other measuring device. 1. CHECK DTC Perform each inspection according to the displayed DTC. Which DTC is displayed? [UNMATCH] >>GO TO 4. 2. CHECK HARNESS CONNECTOR Check the harness connector. YES >> GO TO 3. NO >> Replace harness connector. 3. CHECK WIRING HARNESS Check the wiring harness externals. Is the inspection result normal? YES >> GO TO 4. NO >> Replace wiring harness. 4. REPLACE CRASH ZONE SENSOR 1. Replace crash zone. Refer to SR-51, "Removal and Installation" 2. Perform DTC confirmation procedure. Refer to Is DTC detected? YES >> GO TO 5. NO >> INSPECTION END 5. REPLACE AIR BAG DIAGNOSIS SENSOR UNIT 1. Replace air bag diagnosis sensor unit. Refer to SR-55, "Removal and Installation" 2. Perform DTC confirmation procedure. Refer to Is DTC detected? YES >> GO TO 1. NO >> INSPECTION END |