|
|
содержание .. 1300 1301 1302 1303 ..
SRC-56 < DTC/CIRCUIT DIAGNOSIS > [FOR USA AND CANADA] B1416, B1417, B1418, B1419, B1420 AIR BAG DIAGNOSIS SENSOR UNIT B1416, B1417, B1418, B1419, B1420 AIR BAG DIAGNOSIS SENSOR UNIT DTC Logic INFOID:0000000009718519 DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1. CHECK SELF-DIAG RESULT With CONSULT 1. Turn ignition switch ON. 2. Perform “Self Diagnostic Result” mode of “AIR BAG” using CONSULT. Without CONSULT 1. Turn ignition switch ON. 2. Check the air bag warning lamp status. Refer to SRC-15, "On Board Diagnosis Function" NOTE: YES >> Refer to NO >> INSPECTION END Diagnosis Procedure INFOID:0000000009718520 WARNING: • Before servicing, turn ignition switch OFF, disconnect battery negative terminal, and wait at least 3 minutes or more. (To discharge backup capacitor.) • Never use unspecified tester or other measuring device. 1. CHECK HARNESS CONNECTOR Check the harness connector. YES >> GO TO 2. NO >> Replace harness connectors. 2. CHECK WIRING HARNESS Check the wiring harness externals. Is the inspection result normal? YES >> GO TO 3. NO >> Replace wiring harness. 3. REPLACE AIR BAG DIAGNOSIS SENSOR UNIT 1. Replace air bag diagnosis sensor unit. Refer to SR-26, "Removal and Installation" 2. Perform DTC confirmation procedure. Refer to . Is DTC detected? YES >> GO TO 1. NO >> INSPECTION END DTC CONSULT screen items (Trouble diagnosis content) DTC detecting condition Possible cause B1416 CONTROL UNIT Air bag diagnosis sensor unit is Malfunction in air bag diagnosis |