Nissan Murano. Manual - part 1299

SRC-44

< DTC/CIRCUIT DIAGNOSIS >

[FOR USA AND CANADA]

B0094 CRASH ZONE SENSOR

Diagnosis Procedure

INFOID:0000000009718504

WARNING:

• Before servicing, turn ignition switch OFF, disconnect battery negative terminal, and wait at least 3

minutes or more. (To discharge backup capacitor.)

• Never use unspecified tester or other measuring device. 

1.

CHECK DTC

Perform each inspection according to the displayed DTC.

Which DTC is displayed?

[UNMATCH]              >>GO TO 4.
Other than the above >>GO TO 2.

2.

CHECK HARNESS CONNECTOR

Check the harness connector.
Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Replace harness connector.

3.

CHECK WIRING HARNESS

Check the wiring harness externals.

Is the inspection result normal?

YES

>> GO TO 4. 

NO

>> Replace wiring harness.

4.

REPLACE CRASH ZONE SENSOR

1.

Replace crash zone. Refer to 

SR-22, "Removal and Installation"

.

2.

Perform DTC confirmation procedure. Refer to 

SRC-43, "DTC Logic"

.

Is DTC detected?

YES

>> GO TO 5. 

NO

>> INSPECTION END

5.

REPLACE AIR BAG DIAGNOSIS SENSOR UNIT

1.

Replace air bag diagnosis sensor unit. Refer to 

SR-26, "Removal and Installation"

.

2.

Perform DTC confirmation procedure. Refer to 

SRC-43, "DTC Logic"

.

Is DTC detected?

YES

>> GO TO 1.

NO

>> INSPECTION END

B0096 SATELLITE SENSOR

SRC-45

< DTC/CIRCUIT DIAGNOSIS >

[FOR USA AND CANADA]

C

D

E

F

G

I

J

K

L

M

A

B

SRC

N

O

P

B0096 SATELLITE SENSOR

DTC Logic

INFOID:0000000009718505

DTC DETECTION LOGIC

DTC CONFIRMATION PROCEDURE

1.

CHECK SELF-DIAG RESULT

 With CONSULT

1.

Turn ignition switch ON.

2.

Perform “Self Diagnostic Result” mode of “AIR BAG” using CONSULT.

 Without CONSULT

1.

Turn ignition switch ON.

2.

Check the air bag warning lamp status. Refer to 

SRC-15, "On Board Diagnosis Function"

.

NOTE:
SRS does not enter the diagnosis mode if no malfunction is detected in the user mode.

Is malfunctioning part detected?

DTC

CONSULT screen items

(Trouble diagnosis content)

DTC detecting condition

Possible cause

B0096

B-PILLAR SAT SEN RH 
[Right Frontal Restraints 
Sensor 1(Subfault)]

[RESET]

Reset malfunction of B-pillar satel-
lite sensor RH

• Connection malfunction 

of harness or connector

• Internal malfunction of 

B-pillar satellite sensor 
RH

• Internal malfunction of 

air bag diagnosis sensor 
unit

[COMM ERR]

Communication malfunction of B-
pillar satellite sensor RH

[OPEN]

B-pillar satellite sensor RH circuit 
is open

• Connection malfunction 

or open circuit of har-
ness and connector

• Internal malfunction of 

B-pillar satellite sensor 
RH

• Internal malfunction of 

air bag diagnosis sensor 
unit

[UNMATCH]

B-pillar satellite sensor RH is out of 
the specified specification

Air bag diagnosis sensor 
unit and B-pillar satellite 
sensor RH is different from 
the part specified

[OFFSET ERR]

Offset malfunction of B-pillar satel-
lite sensor RH

• Internal malfunction of 

B-pillar satellite sensor 
RH

• Internal malfunction of 

air bag diagnosis sensor 
unit

[SELF-DIAG 
ERR]

Diagnosis malfunction of B-pillar 
satellite sensor RH

[LOWER LIMIT 
ERR]

Lower limit value malfunction of B-
pillar satellite sensor RH

[UPPER LIMIT 
ERR]

Upper limit value malfunction of B-
pillar satellite sensor RH

[GND-SHORT]

B-pillar satellite sensor RH circuit 
is shorted to ground

• Connection malfunction 

or short circuit to ground 
of harness and connec-
tor

• Internal malfunction of 

B-pillar satellite sensor 
RH

• Internal malfunction of 

air bag diagnosis sensor 
unit

SRC-46

< DTC/CIRCUIT DIAGNOSIS >

[FOR USA AND CANADA]

B0096 SATELLITE SENSOR

YES

>> Refer to 

SRC-46, "Diagnosis Procedure"

.

NO

>> INSPECTION END

Diagnosis Procedure

INFOID:0000000009718506

WARNING:

• Before servicing, turn ignition switch OFF, disconnect battery negative terminal, and wait at least 3

minutes or more. (To discharge backup capacitor.)

• Never use unspecified tester or other measuring device. 

1.

CHECK DTC

Perform each inspection according to the displayed DTC.
Which DTC is displayed?

[UNMATCH]              >>GO TO 4.
Other than the above >>GO TO 2.

2.

CHECK HARNESS CONNECTOR

Check the harness connector.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Replace harness connector.

3.

CHECK WIRING HARNESS

Check the wiring harness externals.

Is the inspection result normal?

YES

>> GO TO 4. 

NO

>> Replace wiring harness.

4.

REPLACE B-PILLAR SATELLITE SENSOR RH

1.

Replace B-pillar satellite sensor RH. Refer to 

SR-24, "Removal and Installation"

.

2.

Perform DTC confirmation procedure. Refer to 

SRC-45, "DTC Logic"

.

Is DTC detected?

YES

>> GO TO 5. 

NO

>> INSPECTION END

5.

REPLACE AIR BAG DIAGNOSIS SENSOR UNIT

1.

Replace air bag diagnosis sensor unit. Refer to 

SR-26, "Removal and Installation"

.

2.

Perform DTC confirmation procedure. Refer to 

SRC-45, "DTC Logic"

.

Is DTC detected?

YES

>> GO TO 1.

NO

>> INSPECTION END

B0099 SATELLITE SENSOR

SRC-47

< DTC/CIRCUIT DIAGNOSIS >

[FOR USA AND CANADA]

C

D

E

F

G

I

J

K

L

M

A

B

SRC

N

O

P

B0099 SATELLITE SENSOR

DTC Logic

INFOID:0000000009718507

DTC DETECTION LOGIC

DTC CONFIRMATION PROCEDURE

1.

CHECK SELF-DIAG RESULT

 With CONSULT

1.

Turn ignition switch ON.

2.

Perform “Self Diagnostic Result” mode of “AIR BAG” using CONSULT.

 Without CONSULT

1.

Turn ignition switch ON.

2.

Check the air bag warning lamp status. Refer to 

SRC-15, "On Board Diagnosis Function"

.

NOTE:
SRS does not enter the diagnosis mode if no malfunction is detected in the user mode.

Is malfunctioning part detected?

YES

>> Refer to 

SRC-48, "Diagnosis Procedure"

.

NO

>> INSPECTION END

DTC

CONSULT screen items

(Trouble diagnosis content)

DTC detecting condition

Possible cause

B0099

SATELLITE SENSOR 
[Roll Over Sensor (Sub-
fault)]

[RESET]

Reset malfunction of other satellite 
sensor

• Connection malfunction 

of harness or connector

• Internal malfunction of 

other satellite sensor

• Internal malfunction of 

air bag diagnosis sensor 
unit

[COMM ERR]

Communication malfunction of 
other satellite sensor

[OPEN]

Other satellite sensor circuit is 
open

• Connection malfunction 

or open circuit of har-
ness and connector

• Internal malfunction of 

other satellite sensor

• Internal malfunction of 

air bag diagnosis sensor 
unit

[UNMATCH]

Other satellite sensor is out of the 
specified specification

Air bag diagnosis sensor 
unit and other satellite sen-
sor is different from the 
part specified

[OFFSET ERR]

Offset malfunction of other satellite 
sensor

• Internal malfunction of 

other satellite sensor

• Internal malfunction of 

air bag diagnosis sensor 
unit

[SELF-DIAG 
ERR]

Diagnosis malfunction of other sat-
ellite sensor

[LOWER LIMIT 
ERR]

Lower limit value malfunction of 
other satellite sensor

[UPPER LIMIT 
ERR]

Upper limit value malfunction of 
other satellite sensor

[GND-SHORT]

Other satellite sensor circuit is 
shorted to ground

• Connection malfunction 

or short circuit to ground 
of harness and connec-
tor

• Internal malfunction of 

other satellite sensor

• Internal malfunction of 

air bag diagnosis sensor 
unit