Nissan Murano. Manual - part 52

ADP-200

< SYMPTOM DIAGNOSIS >

MANUAL FUNCTION OR MEMORY FUNCTION DOES NOT OPERATE

YES

>> GO TO 3.

NO

>> Repair or replace the malfunction parts.

3.

CHECK RECLINING MOTOR

Check reclining motor.
Refer to 

ADP-104, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunction parts.

4.

CHECK RECLINING SENSOR

Check reclining sensor.
Refer to 

ADP-84, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunction parts.

5.

CONFIRM THE OPERATION

Check the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-44, "Intermittent Incident"

.

NO

>> GO TO 1.

SEAT LIFTING (FRONT)

SEAT LIFTING (FRONT) : Diagnosis Procedure

INFOID:0000000009720789

1.

CHECK LIFTING (FRONT) MECHANISM

Check for the following.
• Mechanism deformation or pinched foreign materials.
• Interference with other parts because of poor installation.
Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunction parts.

2.

CHECK LIFTING SWITCH (FRONT)

Check lifting switch (front).
Refer to 

ADP-61, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunction parts.

3.

CHECK LIFTING MOTOR (FRONT)

Check lifting motor (front).
Refer to 

ADP-106, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunction parts.

4.

CHECK LIFTING SENSOR (FRONT)

Check lifting sensor (front).
Refer to 

ADP-87, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunction parts.

5.

CONFIRM THE OPERATION

Check the operation again.

MANUAL FUNCTION OR MEMORY FUNCTION DOES NOT OPERATE

ADP-201

< SYMPTOM DIAGNOSIS >

C

D

E

F

G

H

I

K

L

M

A

B

ADP

N

O

P

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-44, "Intermittent Incident"

.

NO

>> GO TO 1.

SEAT LIFTING (REAR)

SEAT LIFTING (REAR) : Diagnosis Procedure

INFOID:0000000009720790

1.

CHECK LIFTING (REAR) MECHANISM

Check for the following.
• Mechanism deformation or pinched foreign materials.
• Interference with other parts because of poor installation.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunction parts.

2.

CHECK LIFTING SWITCH (REAR)

Check lifting switch (rear).
Refer to 

ADP-63, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunction parts.

3.

CHECK LIFTING MOTOR (REAR)

Check lifting motor (rear).
Refer to 

ADP-108, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunction parts.

4.

CHECK LIFTING SENSOR (REAR)

Check lifting sensor (rear).
Refer to 

ADP-90, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunction parts.

5.

CONFIRM THE OPERATION

Check the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-44, "Intermittent Incident"

.

NO

>> GO TO 1.

STEERING TILT

STEERING TILT : Diagnosis Procedure

INFOID:0000000009720791

1.

CHECK STEERING TILT MECHANISM

Check for the following.
• Mechanism deformation or pinched foreign materials.
• Interference with other parts because of poor installation.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunction parts.

2.

CHECK TILT SWITCH

Check tilt switch.
Refer to 

ADP-65, "Component Function Check"

.

ADP-202

< SYMPTOM DIAGNOSIS >

MANUAL FUNCTION OR MEMORY FUNCTION DOES NOT OPERATE

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunction parts.

3.

CHECK TILT MOTOR

Check tilt motor.
Refer to 

ADP-110, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunction parts.

4.

CHECK TILT SENSOR

Check steering tilt sensor.
Refer to 

ADP-93, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunction parts.

5.

CONFIRM THE OPERATION

Check the operation again.
Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-44, "Intermittent Incident"

.

NO

>> GO TO 1.

STEERING TELESCOPIC

STEERING TELESCOPIC : Diagnosis Procedure

INFOID:0000000009720792

1.

CHECK STEERING TELESCOPIC MECHANISM

Check for the following.
• Mechanism deformation or pinched foreign materials.
• Interference with other parts because of poor installation.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunction parts.

2.

CHECK TELESCOPIC SWITCH

Check telescopic switch.
Refer to 

ADP-67, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunction parts.

3.

CHECK TELESCOPIC MOTOR

Check telescopic motor.
Refer to 

ADP-112, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunction parts.

4.

CHECK TELESCOPIC SENSOR

Check steering telescopic sensor.
Refer to 

ADP-95, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunction parts.

5.

CONFIRM THE OPERATION

MANUAL FUNCTION OR MEMORY FUNCTION DOES NOT OPERATE

ADP-203

< SYMPTOM DIAGNOSIS >

C

D

E

F

G

H

I

K

L

M

A

B

ADP

N

O

P

Check the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-44, "Intermittent Incident"

.

NO

>> GO TO 1.

DOOR MIRROR

DOOR MIRROR : Diagnosis Procedure

INFOID:0000000009720793

1.

CHECK DOOR MIRROR MECHANISM

Check for the following.
• Mechanism deformation or pinched foreign materials.
• Interference with other parts because of poor installation.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunction parts.

2.

CHECK MIRROR SWITCH

Check mirror switch.
Refer to 

ADP-74, "MIRROR SWITCH : Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunction parts.

3.

CHECK MIRROR MOTOR

Check mirror motor.
Refer to 

ADP-114, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunction parts.

4.

CHECK MIRROR SENSOR

Check mirror sensor.
Refer to 

ADP-98, "DRIVER SIDE : Component Function Check"

. (Driver side)

Refer to 

ADP-99, "PASSENGER SIDE : Component Function Check"

. (Passenger side)

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunction parts.

5.

CONFIRM THE OPERATION

Check the operation again.
Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-44, "Intermittent Incident"

.

NO

>> GO TO 1.