|
|
содержание .. 994 995 996 997 ..
P1486 LOW PRESSURE EGR VOLUME CONTROL VALVE POSITION SENSOR EC-1113 < DTC/CIRCUIT DIAGNOSIS > [R9M] C D E F G H I J K L M A EC N P O P1486 LOW PRESSURE EGR VOLUME CONTROL VALVE POSITION DTC Description INFOID:0000000010935805 DTC DETECTION LOGIC POSSIBLE CAUSE • Harness or connectors (Low pressure EGR volume control valve position sensor circuit is open or shorted.) FAIL-SAFE • EGR valve is closed position DTC CONFIRMATION PROCEDURE 1. PRECONDITIONING If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at >> GO TO 2. 2. PERFORM DTC CONFIRMATION PROCEDURE 1. Turn ignition switch ON and wait at least 1 second. 2. Check DTC. Is DTC detected? YES >> Proceed to EC-1113, "Diagnosis Procedure" NO-1 >> To check malfunction symptom before repair: Refer to GI-44, "Intermittent Incident" NO-2 >> Confirmation after repair: INSPECTION END Diagnosis Procedure INFOID:0000000010935806 1. CHECK LOW PRESSURE EGR VOLUME CONTROL VALVE Visually check low pressure EGR volume control valve for chipping. Is the inspection result normal? YES >> GO TO 2. NO >> Repair or replace error-detected parts. 2. CHECK DIESEL PARTICULATE FILTER EC-1173, "Component Inspection" . Is the inspection result normal? YES >> GO TO 3. NO >> Replace diesel particulate filter. 3. CHECK ECM HARNESS CONNECTOR CONNECTIONS Check ECM harness connector connection. DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition P1486 LOW PRESSURE EGR VALVE POSITION • An excessively high voltage (more than 4.7 V) from low pressure EGR volume control valve position sensor is sent to ECM. • An excessively low voltage (less than 0.3 V) from low pressure EGR vol- ume control valve position sensor is sent to ECM. |