Nissan X-Trail 32. Manual - part 2216

C1716-00, C1717-00, C1718-00, C1719-00 TIRE PRESSURE SENSOR

WT-37

< DTC/CIRCUIT DIAGNOSIS >

C

D

F

G

H

I

J

K

L

M

A

B

WT

N

O

P

C1716-00, C1717-00, C1718-00, C1719-00 TIRE PRESSURE SENSOR

DTC Description

INFOID:0000000010715078

DTC DETECTION LOGIC

NOTE:
The actual malfunction part may differ from the malfunction part which DTC shows if ID registration is not per-
formed after performing tire rotation or tire/road wheel replacement. 

POSSIBLE CAUSE

• Tire pressure sensor
• BCM

DTC CONFIRMATION PROCEDURE

1.

PERFORM SELF DIAGNOSTIC RESULT 

With CONSULT

1.

Turn the ignition switch ON.

CAUTION:

Never start the engine.

2.

Check tire pressure for all wheels and adjust to the specified value. Refer to 

WT-66, "Tire Air Pressure"

. 

3.

Perform self-diagnosis for “AIR PRESSURE MONITOR”.

Is DTC “C1716-00”, “C1717-00”, “C1718-00”, or “C1719-00” detected?

YES

>> Proceed to 

WT-37, "Diagnosis Procedure"

.

NO-1

>> To check malfunction symptom before repair: Refer to 

GI-44, "Intermittent Incident"

.

NO-2

>> Confirmation after repair: INSPECTION END

Diagnosis Procedure

INFOID:0000000010715079

1.

TIRE PRESSURE SENSOR ID REGISTRATION

Perform tire pressure sensor ID registration. Refer to 

WT-30, "Work Procedure"

.

Can the tire pressure sensor ID registration be completed?

YES

>> Perform “DTC CONFIRMATION PROCEDURE” (self-diagnosis) again. Refer to 

WT-37, "DTC

Description"

.

NO

>> Replace applicable tire pressure sensor. Refer to 

WT-62, "Removal and Installation"

.

DTC No.

CONSULT screen item

(Trouble diagnosis content)

DTC Detection Condition

C1716-00

[PRESSDATA ERR] FL
(Pressure data error front left)

Malfunction in the tire pressure data from the front left wheel tire pressure sensor.

C1717-00

[PRESSDATA ERR] FR
(Pressure data error front right)

Malfunction in the tire pressure data from the front right wheel tire pressure sen-
sor.

C1718-00

[PRESSDATA ERR] RR
(Pressure data error rear right)

Malfunction in the tire pressure data from the rear right wheel tire pressure sen-
sor.

C1719-00

[PRESSDATA ERR] RL
(Pressure data error rear left)

Malfunction in the tire pressure data from the rear left wheel tire pressure sensor.

WT-38

< DTC/CIRCUIT DIAGNOSIS >

C1729-00 VEHICLE SPEED SIGNAL

C1729-00 VEHICLE SPEED SIGNAL

DTC Description

INFOID:0000000010715080

DTC DETECTION LOGIC

POSSIBLE CAUSES

• CAN communication
• BCM
• ABS actuator and electric unit (control unit) malfunction

DTC CONFIRMATION PROCEDURE

1.

DTC CONFIRMATION PROCEDURE

With CONSULT

1.

Drive the vehicle.

2.

Stop the vehicle.

3.

Perform self-diagnosis in “AIR PRESSURE MONITOR”.

Is DTC “C1729-00” detected?

YES

>> Proceed to 

WT-38, "Diagnosis Procedure"

.

NO-1

>> To check malfunction symptom before repair: Refer to 

GI-44, "Intermittent Incident"

.

NO-2

>> Confirmation after repair: INSPECTION END

Diagnosis Procedure

INFOID:0000000010715081

1.

PERFORM ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) SELF-DIAGNOSIS

With CONSULT

Perform self-diagnosis for “ABS”.
Is any DTCs detected?

YES

>> Check the DTCs. Refer to 

BRC-84, "DTC Index"

.

NO

>> GO TO 2.

2.

CHECK BCM INPUT/OUTPUT SIGNAL

Check BCM input/output signal values. Refer to 

BCS-53, "Reference Value"

. 

Is the inspection result normal?

YES

>> Check pin terminal and connection of each harness connector for malfunctioning conditions. 

NO

>> Replace the BCM. Refer to 

BCS-121, "Removal and Installation"

.

DTC No.

CONSULT screen item

(Trouble diagnosis content)

DTC Detection Condition

C1729-00

VHCL SPEED SIG ERR
(Vehicle speed signal error)

Vehicle speed signal not detected.

C1734-00 CONTROL UNIT

WT-39

< DTC/CIRCUIT DIAGNOSIS >

C

D

F

G

H

I

J

K

L

M

A

B

WT

N

O

P

C1734-00 CONTROL UNIT

DTC Description

INFOID:0000000010715082

DTC DETECTION LOGIC

POSSIBLE CAUSE

BCM

DTC CONFIRMATION PROCEDURE

1.

PERFORM SELF DIAGNOSTIC RESULT 

With CONSULT

Perform self-diagnosis in “AIR PRESSURE MONITOR”.

Is DTC “C1734-00” detected?

YES

>> Proceed to 

WT-39, "Diagnosis Procedure"

.

NO-1

>> To check malfunction symptom before repair: Refer to 

GI-44, "Intermittent Incident"

.

NO-2

>> Confirmation after repair: INSPECTION END

Diagnosis Procedure

INFOID:0000000010715083

1.

CHECK BCM HARNESS CONNECTORS

Check BCM harness connectors for damage or loose connections.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace connectors.

2.

CHECK BCM POWER SUPPLY CIRCUIT

Check BCM power supply circuit. Refer to 

BCS-114, "Diagnosis Procedure"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace harness or connectors.

3.

CHECK BCM INPUT/OUTPUT SIGNALS

Check BCM input/output signals. Refer to 

BCS-53, "Reference Value"

.

Is the inspection result normal?

YES

>> Check pin terminal and connection of each harness connector for malfunctioning conditions. 

NO

>> Replace BCM. Refer to 

BCS-121, "Removal and Installation"

.

DTC No.

CONSULT screen item

(Trouble diagnosis content)

DTC Detection Condition

C1734-00

CONTROL UNIT
(Control unit)

TPMS malfunction in BCM.

WT-40

< DTC/CIRCUIT DIAGNOSIS >

C1735-00 IGNITION SIGNAL

C1735-00 IGNITION SIGNAL

DTC Description

INFOID:0000000010715084

DTC DETECTION LOGIC

POSSIBLE CAUSE

BCM

DTC CONFIRMATION PROCEDURE

1.

PERFORM SELF DIAGNOSTIC RESULT 

With CONSULT

Perform self-diagnosis in “AIR PRESSURE MONITOR”.

Is DTC “C1735-00” detected?

YES

>> Proceed to 

WT-40, "Diagnosis Procedure"

.

NO-1

>> To check malfunction symptom before repair: Refer to 

GI-44, "Intermittent Incident"

.

NO-2

>> Confirmation after repair: INSPECTION END

Diagnosis Procedure

INFOID:0000000010715085

1.

PERFORM BCM SELF-DIAGNOSIS

Perform self-diagnosis for “BCM”.

Is any DTCs detection? 

YES

>> Check the DTCs. Refer to 

BCS-78, "DTC Index"

.

NO

>> Replace BCM. Refer to 

BCS-121, "Removal and Installation"

.

DTC No.

CONSULT screen item

(Trouble diagnosis content)

DTC Detection Condition

C1735-00

IGN CIRCUIT OPEN
(Ignition circuit open)

BCM has detected a mismatch between IGN ON signals.