содержание .. 2197 2198 2199 2200 ..
Nissan X-Trail 32. Manual - part 2199
WCS
DIAGNOSIS SYSTEM (COMBINATION METER)
WCS-27
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
OUTSIDE TEMP
[
°
C or
°
F]
Ambient temperature value converted from ambient sensor signal received from
ambient sensor.
NOTE:
This may not match with the temperature value indicated on the information dis-
play. (Because the information display value is a corrected value from the ambient
sensor input value.)
BUZZER
[On/Off]
X
Buzzer status (in the combination meter) is detected from the buzzer output signal
received from each unit via CAN communication and the warning output condition
of the combination meter.
ENG OIL TMP
[Off]
NOTE:
This item is displayed, but cannot be monitored.
TRQ DSTRBT
[%]
NOTE:
This item is displayed, but cannot be monitored.
AMT P SFT
[Off]
NOTE:
This item is displayed, but cannot be monitored.
AMT SYS CHCK
[Off]
NOTE:
This item is displayed, but cannot be monitored.
AMT SFT POSI
[Off]
NOTE:
This item is displayed, but cannot be monitored.
AMT OIL TMP H
[Off]
NOTE:
This item is displayed, but cannot be monitored.
AMT CHCK
[Off]
NOTE:
This item is displayed, but cannot be monitored.
AMT CL TMP H
[Off]
NOTE:
This item is displayed, but cannot be monitored.
AMT MALF
[Off]
NOTE:
This item is displayed, but cannot be monitored.
TPMS FLT TIRE
[On/Off]
Status of flat tire detected from tire pressure data signal is received from BCM via
CAN communication.
TPMS PRESS L
[On/Off]
Status of tire pressure low from tire pressure data signal is received from BCM via
CAN communication
ASCD SPD BLNK
[On/Off]
Blinking status of ASCD or speed limiter set vehicle speed that is judged by the
ASCD status signal received from ECM via CAN communication.
ASCD STATUS
[Off, ASCD, CRUISE, SL ON, SL
SET]
Display status of ASCD and speed limiter status display judged by the ASCD sta-
tus signal received from ECM via CAN communication.
ASCD REQ SPD
[km/h/Off]
ASCD set vehicle speed value judged by the ASCD status signal received from
ECM via CAN communication.
E/O CHG TMNG RST
[On/Off]
Resetting of a remaining distance to the engine oil change time.
ECO DRIVE NAVI
[LEVEL 0 - 30]
Status of ECO pedal guide detected from ECO pedal guide signal received from
ECM via CAN communication.
BATTRY CIRCUIT STATUS
[NORMAL/OPEN]
Status of fuse for shipping mode from shipping mode status signal received from
BCM via CAN communication.
STRG SW INPUT
[SW1-SW10, NO INPUT]
Status of steering switch.
ITS SONAR SET OUTPUT
[NO SW ST, LDW OFF, LDW ON,
BSW OFF, BSW ON, P MV OFF, P
MV ON, SONAR OFF, SONAR ON,
P SEN OFF, P SEN ON, P SEN
FRONT, P BUZ HIGH, P BUZ MED,
P BUZ LOW, P RNG FAR, P RNG
MED, P RNG NEAR]
Status of Driving Aids and Parking Aids set on the information display of the com-
bination meter.
Display item [Unit]
MAIN
SIGNALS
Description