|
|
содержание .. 2160 2161 2162 2163 ..
TM-606 < DTC/CIRCUIT DIAGNOSIS > [CVT: RE0F10G] P0847 TRANSMISSION FLUID PRESSURE SEN/SW B Is the inspection result normal? YES >> INSPECTION END NO >> GO TO 2. 2. CHECK CIRCUIT BETWEEN TCM AND CVT UNIT (PART 1) 1. Turn ignition switch OFF. 2. Disconnect TCM connector and CVT unit connector. 3. Check continuity between TCM harness connector terminals and CVT unit harness connector terminals. Is the inspection result normal? YES >> GO TO 3. NO >> Repair or replace malfunctioning parts. 3. CHECK CIRCUIT BETWEEN TCM AND CVT UNIT (PART 2) Check continuity between TCM harness connector terminals and ground. Is the inspection result normal? YES >> There is malfunction of secondary pressure sensor. Replace transaxle assembly. Refer to 704, "Removal and Installation" . NO >> Repair or replace malfunctioning parts. + − Condition Voltage TCM Connector Terminal F119 16 Ground • After engine warm up 1.65 – 1.75 V TCM CVT unit Continuity Connector Terminal Connector Terminal F119 11 F127 18 Existed 16 14 26 22 TCM — Continuity Connector Terminal F119 16 Ground Not existed 26 |