|
|
содержание .. 1973 1974 1975 1976 ..
SRC-68 < DTC/CIRCUIT DIAGNOSIS > B1406, B1407, B1408, B1409, B1410 AIR BAG DIAGNOSIS SENSOR UNIT B1406, B1407, B1408, B1409, B1410 AIR BAG DIAGNOSIS SENSOR UNIT DTC Description INFOID:0000000010688491 DTC DETECTION LOGIC POSSIBLE CAUSE Malfunction in air bag diagnosis sensor unit FAIL-SAFE — DTC CONFIRMATION PROCEDURE 1. CHECK SELF-DIAG RESULT With CONSULT 1. Turn ignition switch ON. 2. Perform “Self Diagnostic Result” mode of “AIR BAG” using CONSULT. Is malfunctioning part detected? YES >> Refer to NO-1 >> To check malfunction symptom before repair: Refer to GI-44, "Intermittent Incident" . NO-2 >> Confirmation after repair: INSPECTION END Diagnosis Procedure INFOID:0000000010688492 WARNING: • Before servicing, turn ignition switch OFF, disconnect battery negative terminal, and wait at least 3 minutes or more. (To discharge backup capacitor.) • Never use unspecified tester or other measuring device. 1. CHECK HARNESS CONNECTOR Check the harness connector for disconnection, looseness or damage. Is the inspection result normal? YES >> GO TO 2. NO–1 >> Damage: Replace malfunctioning harness and connector. 2. CHECK WIRING HARNESS Check the wiring harness externals. Is the inspection result normal? YES >> GO TO 3. NO >> Replace malfunctioning harness and connector. 3. REPLACE AIR BAG DIAGNOSIS SENSOR UNIT 1. Replace air bag diagnosis sensor unit. Refer to SR-38, "Removal and Installation" DTC CONSULT screen items (Trouble diagnosis content) DTC detecting condition B1406–00 CONTROL UNIT Air bag diagnosis sensor unit is malfunctioning B1407–00 CONTROL UNIT B1408–00 CONTROL UNIT B1409–00 CONTROL UNIT B1410–00 CONTROL UNIT |