Nissan X-Trail 32. Manual - part 1972

SRC-56

< DTC/CIRCUIT DIAGNOSIS >

B0097 C-PILLAR SATELLITE SENSOR

B0097 C-PILLAR SATELLITE SENSOR

DTC Description

INFOID:0000000010688485

DTC DETECTION LOGIC

POSSIBLE CAUSE

[B0097–11]

• Connection malfunction or short circuit to ground of harness and connector
• Internal malfunction of C-pillar satellite sensor RH
• Internal malfunction of air bag diagnosis sensor unit

[B0097–23, B0097–24, B0097–25, B0097–28]

• Internal malfunction of C-pillar satellite sensor RH
• Internal malfunction of air bag diagnosis sensor unit

[B0097–81, B0097–93]

• Connection malfunction of harness or connector
• Internal malfunction of C-pillar satellite sensor RH
• Internal malfunction of air bag diagnosis sensor unit

[B0097–86]

• Air bag diagnosis sensor unit and C-pillar satellite sensor RH is different from the part specified

[B0097–88]

• Connection malfunction or open circuit of harness and connector
• Internal malfunction of C-pillar satellite sensor RH
• Internal malfunction of air bag diagnosis sensor unit

FAIL-SAFE

—

DTC CONFIRMATION PROCEDURE

1.

CHECK SELF-DIAG RESULT

 With CONSULT

1.

Turn ignition switch ON.

2.

Perform “Self Diagnostic Result” mode of “AIR BAG” using CONSULT.

Is malfunctioning part detected?

YES

>> Refer to 

SRC-56, "Diagnosis Procedure"

.

NO-1

>> To check malfunction symptom before repair: Refer to 

GI-44, "Intermittent Incident"

.

NO-2

>> Confirmation after repair: INSPECTION END

Diagnosis Procedure

INFOID:0000000010688486

WARNING:

DTC

CONSULT screen items

(Trouble diagnosis content)

DTC detecting condition

B0097–11

C-PILLAR SAT SEN RH 
[Right Frontal Restraints Sensor 2 (Subfault)]

C-pillar satellite sensor RH circuit is shorted to ground

B0097–23

Lower limit value malfunction of C-pillar satellite sensor RH

B0097–24

Upper limit value malfunction of C-pillar satellite sensor RH

B0097–25

Diagnosis malfunction of C-pillar satellite sensor RH

B0097–28

Offset malfunction of C-pillar satellite sensor RH

B0097–81

Communication malfunction of C-pillar satellite sensor RH

B0097–86

C-pillar satellite sensor RH is out of the specified specification

B0097–88

C-pillar satellite sensor RH circuit is open

B0097–93

Reset malfunction of C-pillar satellite sensor RH

B0097 C-PILLAR SATELLITE SENSOR

SRC-57

< DTC/CIRCUIT DIAGNOSIS >

C

D

E

F

G

I

J

K

L

M

A

B

SRC

N

O

P

• Before servicing, turn ignition switch OFF, disconnect battery negative terminal, and wait at least 3

minutes or more. (To discharge backup capacitor.)

• Never use unspecified tester or other measuring device. 

1.

CHECK DTC

Perform each inspection according to the displayed DTC.
Which DTC is displayed?

[B0097–86]              >> GO TO 4.
Other than the above >> GO TO 2.

2.

CHECK HARNESS CONNECTOR

Check the harness connector for disconnection, looseness or damage.

Is the inspection result normal?

YES

>> GO TO 3.

NO–1 >> Damage: Replace malfunctioning harness and connector.
NO–2 >> Disconnection or looseness: Securely lock the connector.

3.

CHECK WIRING HARNESS

Check the wiring harness externals.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Replace malfunctioning harness and connector.

4.

REPLACE C-PILLAR SATELLITE SENSOR RH

1.

Replace C-pillar satellite sensor RH. Refer to 

SR-33, "Removal and Installation"

.

2.

Perform DTC confirmation procedure. Refer to 

SRC-56, "DTC Description"

.

Is DTC detected?

YES

>> GO TO 5. 

NO

>> INSPECTION END

5.

REPLACE AIR BAG DIAGNOSIS SENSOR UNIT

1.

Replace air bag diagnosis sensor unit. Refer to 

SR-38, "Removal and Installation"

.

2.

Perform DTC confirmation procedure. Refer to 

SRC-56, "DTC Description"

.

Is DTC detected?

YES

>> GO TO 1.

NO

>> INSPECTION END

SRC-58

< DTC/CIRCUIT DIAGNOSIS >

B0099 SATELLITE SENSOR

B0099 SATELLITE SENSOR

DTC Description

INFOID:0000000010688487

DTC DETECTION LOGIC

POSSIBLE CAUSE

[B0099–11]

• Connection malfunction or short circuit to ground of harness and connector
• Internal malfunction of other satellite sensor
• Internal malfunction of air bag diagnosis sensor unit

[B0099–23, B0099–24, B0099–25, B0099–28]

• Internal malfunction of other satellite sensor
• Internal malfunction of air bag diagnosis sensor unit

[B0099–81, B0099–93]

• Connection malfunction of harness or connector
• Internal malfunction of other satellite sensor
• Internal malfunction of air bag diagnosis sensor unit

[B0099–86]

• Air bag diagnosis sensor unit and other satellite sensor is different from the part specified

[B0099–88]

• Connection malfunction or open circuit of harness and connector
• Internal malfunction of other satellite sensor
• Internal malfunction of air bag diagnosis sensor unit

DTC CONFIRMATION PROCEDURE

1.

CHECK SELF-DIAG RESULT

 With CONSULT

1.

Turn ignition switch ON.

2.

Perform “Self Diagnostic Result” mode of “AIR BAG” using CONSULT.

Is malfunctioning part detected?

YES

>> Refer to 

SRC-58, "Diagnosis Procedure"

.

NO-1

>> To check malfunction symptom before repair: Refer to 

GI-44, "Intermittent Incident"

.

NO-2

>> Confirmation after repair: INSPECTION END

Diagnosis Procedure

INFOID:0000000010688488

WARNING:

• Before servicing, turn ignition switch OFF, disconnect battery negative terminal, and wait at least 3

minutes or more. (To discharge backup capacitor.)

• Never use unspecified tester or other measuring device. 

DTC

CONSULT screen items

(Trouble diagnosis content)

DTC detecting condition

B0099–11

SATELLITE SENSOR 
[Roll Over Sensor (Subfault)]

Other satellite sensor circuit is shorted to ground

B0099–23

Lower limit value malfunction of other satellite sensor

B0099–24

Upper limit value malfunction of other satellite sensor

B0099–25

Diagnosis malfunction of other satellite sensor

B0099–28

Offset malfunction of other satellite sensor

B0099–81

Communication malfunction of other satellite sensor

B0099–86

Other satellite sensor is out of the specified specification

B0099–88

Other satellite sensor circuit is open

B0099–93

Reset malfunction of other satellite sensor

B0099 SATELLITE SENSOR

SRC-59

< DTC/CIRCUIT DIAGNOSIS >

C

D

E

F

G

I

J

K

L

M

A

B

SRC

N

O

P

1.

CHECK DTC

Perform each inspection according to the displayed DTC.
Which DTC is displayed?

[B0099–86]              >> GO TO 4.
Other than the above >> GO TO 2.

2.

CHECK HARNESS CONNECTOR

Check the harness connector for disconnection, looseness or damage.

Is the inspection result normal?

YES

>> GO TO 3.

NO–1 >> Damage: Replace malfunctioning harness and connector.
NO–2 >> Disconnection or looseness: Securely lock the connector.

3.

CHECK WIRING HARNESS

Check the wiring harness externals.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Replace malfunctioning harness and connector.

4.

REPLACE OTHER SATELLITE SENSOR

1.

Replace other satellite sensor. Refer to 

SR-33, "Removal and Installation"

.

2.

Perform DTC confirmation procedure. Refer to 

SRC-58, "DTC Description"

.

Is DTC detected?

YES

>> GO TO 5. 

NO

>> INSPECTION END

5.

REPLACE AIR BAG DIAGNOSIS SENSOR UNIT

1.

Replace air bag diagnosis sensor unit. Refer to 

SR-38, "Removal and Installation"

.

2.

Perform DTC confirmation procedure. Refer to 

SRC-58, "DTC Description"

.

Is DTC detected?

YES

>> GO TO 1.

NO

>> INSPECTION END