|
|
содержание .. 1210 1211 1212 1213 ..
B1256 FRONT FOG LAMP RH POWER SUPPLY CIRCUIT EXL-305 < DTC/CIRCUIT DIAGNOSIS > [HALOGEN HEADLAMP] C D E F G H I J K M A B EXL N O P 4. Check continuity between IPDM E/R harness connector and ground. Is the inspection result normal? YES >> GO TO 2. NO >> Repair or replace harness. 2. CHECK FRONT FOG LAMP RH POWER SUPPLY With CONSULT 1. Connect IPDM E/R connector. 2. Turn ignition switch ON 3. Select “FRONT FOG LAMP” in “Active Test” mode of “IPDM E/R” using CONSULT. 4. With operating the test items, check the voltage between front fog lamp RH harness connector and Is the inspection result normal? YES >> GO TO 3. NO >> Replace IPDM E/R. Refer to PCS-60, "Removal and Installation" . 3. CHECK FRONT FOG LAMP RH BULB Check the front fog lamp RH bulb. Refer to EXL-305, "Component Inspection" . Is the inspection result normal? YES >> INSPECTION END NO >> Replace front fog lamp RH bulb. Refer to Component Inspection INFOID:0000000010789829 1. CHECK FRONT FOG LAMP RH BULB 1. Turn ignition switch OFF. 2. Disconnect front fog lamp RH connector. 3. Check resistance of front fog lamp RH terminals. Is the inspection result normal? YES >> INSPECTION END NO >> Replace front fog lamp RH bulb. Refer to IPDM E/R — Continuity Connector Terminal E149 57 Ground Not existed + - Test item Voltage Front fog lamp RH Connector Terminal E158 1 Ground FRONT FOG On 9 – 16 V Off 0 – 1 V Front fog lamp RH Resistance Terminal 1 2 Except 0 Ω |