|
|
содержание .. 1159 1160 1161 1162 ..
B121A FRONT FOG LAMP LH POWER SUPPLY CIRCUIT EXL-101 < DTC/CIRCUIT DIAGNOSIS > [LED HEADLAMP] C D E F G H I J K M A B EXL N O P 2. Turn lighting switch OFF, and front fog lamp switch OFF. 3. Disconnect IPDM E/R connector and front fog lamp LH connector. 4. Check continuity between IPDM E/R harness connector and ground. Is the inspection result normal? YES >> GO TO 2. NO >> Repair or replace harness. 2. CHECK FRONT FOG LAMP LH POWER SUPPLY With CONSULT 1. Connect IPDM E/R connector. 2. Turn ignition switch ON 3. Select “FRONT FOG LAMP” in “Active Test” mode of “IPDM E/R” using CONSULT. 4. With operating the test items, check the voltage between front fog lamp LH harness connector and Is the inspection result normal? YES >> GO TO 3. NO >> Replace IPDM E/R. Refer to PCS-60, "Removal and Installation" . 3. CHECK FRONT FOG LAMP LH BULB Check the front fog lamp LH bulb. Refer to EXL-101, "Component Inspection" Is the inspection result normal? YES >> INSPECTION END NO >> Replace front fog lamp LH bulb. Refer to . Component Inspection INFOID:0000000010788791 1. CHECK FRONT FOG LAMP LH BULB 1. Turn ignition switch OFF. 2. Disconnect front fog lamp LH connector. 3. Check resistance of front fog lamp LH terminals. Is the inspection result normal? YES >> INSPECTION END NO >> Replace front fog lamp LH bulb. Refer to . IPDM E/R — Continuity Connector Terminal E148 51 Ground Not existed + - Test item Voltage Front fog lamp LH Connector Terminal E159 1 Ground FRONT FOG On 9 – 16 V Off 0 – 1 V Front fog lamp LH Resistance Terminal 1 2 Except 0 Ω |