|
|
содержание .. 79 80 81 82 ..
BCS-40 < SYSTEM DESCRIPTION > DIAGNOSIS SYSTEM (BCM) AUT CRANK TMR Indicates [On/Off] whether or not in AUTO CRANKING MODE status CRNK PRBT TME Indicates the time for changing from cranking prohibited status to cranking possible status AUT CRANK TMR Indicates the time that AUTO CRANKING MODE operates CRANKING TME Indicates the cranking operation time SHORT CRANK NOTE: RKE OPE COUN1 When remote keyless entry receiver receives the signal transmitted while operating on Intel- RKE OPE COUN2 NOTE: S/L IGN OFF POSITION Indicates [On/Off] condition of Ignition OFF signal S/L SENSOR CIRCUIT 1 Indicates [Gnd/On] condition of steering lock unit sensor circuit S/L SENSOR CIRCUIT 2 Indicates [On/Off] condition of steering lock unit sensor circuit S/L POWER OUTPUT Indicates [On/Off] condition of steering lock unit power supply S/L POWER CHECK Indicates [On/Off] condition of steering lock unit power supply ANTICIPATED POWER Indicates [On/Off] condition of anticipated power supply S/L LOCK REQ Indicates [On/Off] condition of steering lock unit lock request signal S/L - BCM (CAN) Indicates [On/Off] condition of CAN communication S/L POWER ERROR Indicates [On/Off] condition of steering lock unit power supply error VEH SPEED ERROR (S/L) Indicates [On/Off] condition of vehicle speed signal VEH SPEED NORMAL (S/L) Indicates [On/Off] condition of vehicle speed signal ENGINE RUNNING (S/L) Indicates [On/Off] condition of engine running S/L ID DISCORD Indicates [Correct/Incorrect] condition of ID verification S/L ANTI-SCAN MODE Indicates [On/Off] condition of antiscan mode S/L LOCK NOT PERMIT Indicates [Inhibition/No inhbt] condition of inhibit steering lock S/L UNLOCK (CAN) Indicates [Finished/Unfinished] condition of steering lock unit unlock S/L ID STATUS (CAN) Indicates [Coded/Blank] condition of registration ID S/L RESET STATUS (CAN) Indicates [Exit/No exit] condition of steering lock unit reset signal S/L LO-LEVEL MALFUNC Indicates [Malf/No malf] condition of lo-level malfunction S/L LOCK POSITION (CAN) Indicates [Armed/Malf/Unlocked/Undefined] condition of lock/unlock position signal S/L ACT MALFUNCTION (CAN) Indicates [Malf/No malf] condition of steering lock unit malfunction S/L HI-LEVEL MALFUNC (CAN) Indicates [Malf/No malf] condition of hi-level malfunction S/L OPERATION PRHBT (SPD) Indicates [On/Off] condition of vehicle speed signal S/L OPERATION PRHBT (PWR) Indicates [Allowed/Forbid] condition of safety line inhibition S/L SENSOR POWER (CAN) Indicates [On/Off] condition of sensor test power supply S/L SEN TEST PERMIT (CAN) Indicates [Forbid/Authorize] condition of sensor test S/L STAT NOT DETECT (CAN) Indicates [Ok/Undefind] condition of steering lock undefined position signal S/L LOCKING FINISHED (CAN) Indicates [Unfinshd/Finished] condition of steering lock unit lock status signal STOP/START SW Indicates [On/Off] condition of stop/start off switch RKE-LOCK Indicates [On/Off] condition of LOCK signal from Intelligent Key RKE-UNLOCK Indicates [On/Off] condition of UNLOCK signal from Intelligent Key RKE-TR/BD NOTE: RKE-PANIC NOTE: Monitor Item Condition |