|
|
PB-130 < DTC/CIRCUIT DIAGNOSIS > U1060 VEHICLE SPEED 2. Select “ABS” and “DATA MONITOR” according to this order. 3. Check the following monitor item. Refer to . - “RR LH SENSOR” - “RR RH SENSOR” Is the inspection result normal? YES >> GO TO 3. NO >> Check the ABS actuator and electric unit (control unit) system. Refer to 3. PERFORM SELF-DIAGNOSIS (2) With CONSULT 1. Turn the ignition switch OFF to ON. CAUTION: Be sure to wait for 10 seconds or more after turning the ignition switch OFF. 2. Erase self-diagnosis result for “EHS/PKB”. 3. Repeat the parking brake switch operation (pull and push) five times. 4. Perform self-diagnosis for “EHS/PKB”. Is DTC “U1060”, “U1000” detected? YES (“U1060”)>>Replace the electric parking brake control module. Refer to PB-141, "Removal and Installa- . YES (“U1000”)>>Proceed to LAN-28, "Trouble Diagnosis Flow Chart" NO >> INSPECTION END |