|
|
WT-38 < DTC/CIRCUIT DIAGNOSIS > [WITH TPMS] C1734 CONTROL UNIT C1734 CONTROL UNIT DTC Description INFOID:0000000010339533 DTC DETECTION LOGIC POSSIBLE CAUSE • BCM DTC CONFIRMATION PROCEDURE 1. PERFORM SELF DIAGNOSTIC RESULT With CONSULT Perform self-diagnosis in “AIR PRESSURE MONITOR”. Is DTC C1734 detected? YES >> Proceed to . NO-1 >> To check malfunction symptom before repair: Refer to GI-41, "Intermittent Incident" . NO-2 >> Confirmation after repair: INSPECTION END Diagnosis Procedure INFOID:0000000010339534 1. CHECK BCM HARNESS CONNECTORS Check BCM harness connectors for damage or loose connections. Is the inspection result normal? YES >> GO TO 2. NO >> Repair or replace connectors. 2. CHECK BCM POWER SUPPLY CIRCUIT Check BCM power supply circuit. Refer to BCS-125, "Diagnosis Procedure" . Is the inspection result normal? YES >> GO TO 3. NO >> Repair or replace harness or connectors. 3. CHECK BCM INPUT/OUTPUT SIGNALS Check BCM input/output signals. Refer to . Is the inspection result normal? YES >> Check pin terminal and connection of each harness connector for malfunctioning conditions. NO >> Replace BCM. Refer to BCS-132, "Removal and Installation" . DTC No. CONSULT screen item (Trouble diagnosis content) DTC Detection Condition C1734 CONTROL UNIT TPMS malfunction in BCM. |