|
|
SHIFT LOCK SYSTEM TM-607 < DTC/CIRCUIT DIAGNOSIS > [CVT: RE0F10G] C E F G H I J K L M A B TM N O P Is the inspection result normal? YES >> INSPECTION END NO >> Replace stop lamp switch. Refer to (LHD), (RHD). Component Inspection (Park Position Switch) INFOID:0000000010475026 1. CHECK PARK POSITION SWITCH Check continuity between park position switch connector terminals. CAUTION: • Connect the fuse between the terminals when applying the voltage. Is the inspection result normal? YES >> INSPECTION END NO >> Replace park position switch. Refer to TM-619, "Disassembly and Assembly" Component Inspection (Shift Lock Solenoid) INFOID:0000000010475027 1. CHECK SHIFT LOCK SOLENOID Apply voltage to terminals of shift lock solenoid connector and check that shift lock solenoid is activated. CAUTION: • Connect the fuse between the terminals when applying the voltage. Is the inspection result normal? YES >> INSPECTION END NO >> Replace shift lock unit. Refer to TM-619, "Disassembly and Assembly" Component Inspection (CVT Shift Selector Harness) INFOID:0000000010475028 1. CHECK CVT SHIFT SELECTOR HARNESS (PART 1) Check continuity between CVT shift selector harness connector terminal and shift lock solenoid harness con- Stop lamp switch Condition Continuity Terminal 3 – 4 Depressed brake pedal Yes Released brake pedal No Park position switch Condition Continuity Terminal 1 – 2 Shift selector lever to “P” position. Existed Other than above Not existed Shift lock solenoid Condition Status + (fuse) − Terminal 1 2 Apply battery voltage be- Shift lock solenoid operates CVT shift selector Shift lock solenoid Continuity Connector Terminal Connector Terminal M9 3 M326 1 Existed |