|
|
EC9-316 < DTC/CIRCUIT DIAGNOSIS > [R9M] P1503 ACTIVE GRILLE SHUTTER P1503 ACTIVE GRILLE SHUTTER DTC Logic INFOID:0000000010499304 DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1. PRECONDITIONING If DTC Confirmation Procedure has been preciously conducted, always turn ignition switch OFF and wait at >> GO TO 2. 2. PERFORM DTC CONFIRMATION PROCEDURE-1 1. Turn ignition switch ON and wait at least 5 seconds. 2. Check DTC. Is the DTC detected? YES >> Proceed to EC9-316, "Diagnosis Procedure" . NO >> GO TO 3. 3. PERFORM DTC CONFIRMATION PROCEDURE-2 1. Start the engine and wait at least 60 seconds. 2. Check DTC. Is the DTC detected? YES >> Proceed to EC9-316, "Diagnosis Procedure" . NO >> INSPECTION END Diagnosis Procedure INFOID:0000000010499305 1. CHECK DTC OF IPDM E/R Check DTC of IPDM E/R. Is any DTC detected? YES >> Perform trouble diagnosis for the detected DTC. Refer to . NO >> GO TO 2. 2. CHECK ECM HARNESS CONNECTOR CONNECTIONS Check ECM harness connector and active grille shutter harness connector connection. DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition Possible cause P1503 CONTROLLED AIR VENTS FROM THE VALVE MO- • 3.DEF: CLOSING OF AIR INLET FLAP • 4.DEF: FAULT ALERTED VIA THE CONTROL UNIT • 5.DEF: INITIALIZATION NOT VALID • 6.DEF: MECHANICAL FAULT • 7.DEF: NO SIGNAL SPE- CIFIC SUBTYPE • LIN communication error with active grille shutter or operational malfunctions for specified times. • Detects the temperature of active grille shutter ac- tuator is more than 155 ° C (311 ° F) for more than 5 seconds for accumulation. • Detects the temperature of active grille shutter ac- tuator is more than 155 ° C (311 ° F) for more than specified times. • Harness or connectors |