|
|
EC9-292 < DTC/CIRCUIT DIAGNOSIS > [R9M] P1482 EXHAUST ELECTRIC THROTTLE CONTROL ACTUATOR P1482 EXHAUST ELECTRIC THROTTLE CONTROL ACTUATOR DTC Logic INFOID:0000000010309281 DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1. PRECONDITIONING If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at >> GO TO 2. 2. PERFORM DTC CONFIRMATION PROCEDURE 1. Turn ignition switch ON and wait at least 1 second. 2. Check DTC. Is DTC detected? YES >> Proceed to EC9-292, "Diagnosis Procedure" . NO >> INSPECTION END Diagnosis Procedure INFOID:0000000010309282 1. CHECK ECM HARNESS CONNECTOR CONNECTIONS 1. Turn ignition switch OFF. 2. Check ECM harness connector connection. Is the inspection result normal? YES >> GO TO 2. NO >> Repair or replace error-detected parts. 2. CHECK EXHAUST ELECTRIC THROTTLE CONTROL ACTUATOR HARNESS CONNECTOR CONNEC- TIONS Check exhaust electric throttle control actuator harness connector connection. Is the inspection result normal? YES >> GO TO 3. NO >> Repair or replace error-detected parts. 3. CHECK EXHAUST ELECTRIC THROTTLE CONTROL ACTUATOR POWER SUPPLY CIRCUIT Check the power supply of the exhaust electric throttle control actuator. Is the inspection result normal? YES >> GO TO 4. DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition Possible cause P1482 EXHAUST THROTTLE POSI- ENCE • An exhaust throttle valve position sensor voltage is more than 4.8 V. • An exhaust throttle valve position sensor voltage is less than 0.2 V. • Harness and connectors (Exhaust throttle valve position • Exhaust throttle valve position sensor + - Voltage Exhaust electric throttle control ac- tuator Connector Terminal F59 1 Ground Battery voltage |