|
|
ECK-216 < DTC/CIRCUIT DIAGNOSIS > [K9K] P0217 ENGINE OVER TEMPERATURE P0217 ENGINE OVER TEMPERATURE DTC Logic INFOID:0000000010289798 DTC DETECTION LOGIC If the cooling fan or other component in the cooling system malfunctions, engine coolant temperature will rise. CAUTION: When a malfunction is indicated, be sure to replace the coolant. Also, replace the engine oil. Fill radiator with coolant up to specified level with a filling speed of 2 liters per minute. Be sure to 2. After refilling coolant, run engine to ensure that no water-flow noise is emitted. DTC CONFIRMATION PROCEDURE 1. PERFORM COMPONENT FUNCTION CHECK Perform component function check. Refer to ECK-216, "Component Function Check" NOTE: YES >> INSPECTION END NO >> Go to ECK-217, "Diagnosis Procedure" . Component Function Check INFOID:0000000010289799 1. PERFORM COMPONENT FUNCTION CHECK-1 WARNING: Never remove the reservoir tank cap when the engine is hot. Serious burns could be caused by high Is the coolant level in the reservoir tank and/or radiator below the YES >> Proceed to ECK-217, "Diagnosis Procedure" NO >> GO TO 2. DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition Possible cause P0217 ENGINE OVERHEATING PERATURE TOO HIGH When engine coolant temperature is 110 ° C or more for 2 seconds. • Cooling fan ature sensor • ECM SEF621W |