Nissan Qashqai J11. Manual - part 1834

BCS-62

< SYSTEM DESCRIPTION >

DIAGNOSIS SYSTEM (BCM)

WORK SUPPORT

ACTIVE TEST

THEFT ALM : CONSULT Function (BCM - THEFT) (Without Intelligent Key System)

INFOID:0000000010505164

DATA MONITOR

NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.

KEY CYL UN-SW

NOTE:
This item is indicated, but not monitored.

KEY CYL SW-TR

NOTE:
This item is indicated, but not monitored.

SEN CANCEL SW

Indicates [ON/OFF] condition of sensor cancel switch.

RKE-LOCK

Indicates [ON/OFF] condition of LOCK signal from Intelligent Key.

RKE-UNLOCK

Indicates [ON/OFF] condition of UNLOCK signal from Intelligent Key.

RKE-TR/BD

NOTE:
This item is indicated, but not monitored.

KEY SW

NOTE:
This item is indicated, but not monitored.

Monitored Item

Description

Service Item

Description

SECURITY ALARM SET

This mode is able to confirm and change vehicle security alarm ON-OFF setting.

SIREN SET

Select the siren function ON or OFF, and siren type.
• MODE 1: Without siren
• MODE 2: With siren
• MODE 3: With external complete protection (with siren)
• MODE 4: Without any external protection (with siren)
• MODE 5: Without external tilt protection (with siren)

THEFT ALM TRG

The switch which triggered vehicle security alarm is recorded.
This mode is able to confirm and erase the record of vehicle security alarm.
The trigger data can be erased by touching “CLEAR” on CONSULT screen.

Test Item

Description

SIREN

Activates the self-diagnosis function for siren control unit.

VEHICLE SECURITY HORN

NOTE:
This item is indicated, but not used

HEAD LAMP

NOTE:
This item is indicated, but not used

Monitored Item

Description

REQ SW -DR

Indicates [ON/OFF] condition of door request switch (driver side).

REQ SW -AS

Indicates [ON/OFF] condition of door request switch (passenger side).

REQ SW -BD/TR

Indicates [ON/OFF] condition of back door opener request switch.

PUSH SW

Indicates [ON/OFF] condition of push-button ignition switch

DOOR SW-DR

Indicates [ON/OFF] condition of front door switch (driver side).

DOOR SW-AS

Indicates [ON/OFF] condition of front door switch (passenger side).

DOOR SW-RR

Indicates [ON/OFF] condition of rear door switch RH.

DOOR SW-RL

Indicates [ON/OFF] condition of rear door switch LH.

DOOR SW-BK

Indicates [ON/OFF] condition of back door switch.

BCS

DIAGNOSIS SYSTEM (BCM)

BCS-63

< SYSTEM DESCRIPTION >

C

D

E

F

G

H

I

J

K

L

B

A

O

P

N

WORK SUPPORT

ACTIVE TEST

SIGNAL BUFFER

SIGNAL BUFFER : CONSULT Function (BCM - SIGNAL BUFFER)

INFOID:0000000010378015

DATA MONITOR

NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.

CDL LOCK SW

Indicates [ON/OFF] condition of lock signal from door lock/unlock switch.

CDL UNLOCK SW

Indicates [ON/OFF] condition of unlock signal from door lock/unlock switch.

KEY CYL LK-SW

NOTE:
This item is indicated, but not monitored.

KEY CYL UN-SW

NOTE:
This item is indicated, but not monitored.

KEY CYL SW-TR

NOTE:
This item is indicated, but not monitored.

SEN CANCEL SW

Indicates [ON/OFF] condition of sensor cancel switch.

RKE-LOCK

Indicates [ON/OFF] condition of LOCK signal from Intelligent Key.

RKE-UNLOCK

Indicates [ON/OFF] condition of UNLOCK signal from Intelligent Key.

RKE-TR/BD

NOTE:
This item is indicated, but not monitored.

KEY SW

NOTE:
This item is indicated, but not monitored.

Monitored Item

Description

Service Item

Description

SECURITY ALARM SET

This mode is able to confirm and change vehicle security alarm ON-OFF setting.

SIREN SET

Select the siren function ON or OFF, and siren type.
• MODE 1: Without siren
• MODE 2: With siren
• MODE 3: With external complete protection (with siren)
• MODE 4: Without any external protection (with siren)
• MODE 5: Without external tilt protection (with siren)

THEFT ALM TRG

The switch which triggered vehicle security alarm is recorded.
This mode is able to confirm and erase the record of vehicle security alarm.
The trigger data can be erased by touching “CLEAR” on CONSULT screen.

Test Item

Description

SIREN

Activates the self-diagnosis function for siren control unit.

VEHICLE SECURITY HORN

NOTE:
This item is indicated, but not used

HEAD LAMP

NOTE:
This item is indicated, but not used

Monitor item [UNIT]

Description

PUSH SW
[Off/On]

Displays the status of the push-button ignition switch (push switch) judged by BCM.

BCS-64

< ECU DIAGNOSIS INFORMATION >

BCM

ECU DIAGNOSIS INFORMATION

BCM

Reference Value

INFOID:0000000010378017

VALUES ON THE DIAGNOSIS TOOL

NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.

CONSULT MONITOR ITEM

Monitor Item

Condition

Value/Status

CONFRM ID ALL

The Intelligent Key ID that the NATS antenna amp. receives is not recog-
nized by any Intelligent Key ID registered to BCM.

Yet

The Intelligent Key ID that the NATS antenna amp. receives is recognized 
by any Intelligent Key ID registered to BCM.

Done

CONFIRM ID4

The Intelligent Key ID that the NATS antenna amp. receives is not recog-
nized by the fourth Intelligent Key ID registered to BCM.

Yet

The Intelligent Key ID that the NATS antenna amp. receives is recognized 
by the fourth Intelligent Key ID registered to BCM.

Done

CONFIRM ID3

The Intelligent Key ID that the NATS antenna amp. receives is not recog-
nized by the third Intelligent Key ID registered to BCM.

Yet

The Intelligent Key ID that the NATS antenna amp. receives is recognized 
by the third Intelligent Key ID registered to BCM.

Done

CONFIRM ID2

The Intelligent Key ID that the NATS antenna amp. receives is not recog-
nized by the second Intelligent Key ID registered to BCM.

Yet

The Intelligent Key ID that the NATS antenna amp. receives is recognized 
by the second Intelligent Key ID registered to BCM.

Done

CONFIRM ID1

The Intelligent Key ID that the NATS antenna amp. receives is not recog-
nized by the first Intelligent Key ID registered to BCM.

Yet

The Intelligent Key ID that the NATS antenna amp. receives is recognized 
by the first Intelligent Key ID registered to BCM.

Done

NOT REGISTERED

BCM detects registered Intelligent Key ID, or BCM does not detect Intelli-
gent Key ID. 

ID OK

BCM detects non-registration Intelligent Key ID.

ID NG

TP 4

The ID of fourth Intelligent Key is not registered to BCM

Yet

The ID of fourth Intelligent Key is registered to BCM

Done

TP 3

The ID of third Intelligent Key is not registered to BCM

Yet

The ID of third Intelligent Key is registered to BCM

Done

TP 2

The ID of second Intelligent Key is not registered to BCM

Yet

The ID of second Intelligent Key is registered to BCM

Done

TP 1

The ID of first Intelligent Key is not registered to BCM

Yet

The ID of first Intelligent Key is registered to BCM

Done

REQ SW -DR

Driver door request switch is not pressed

Off

Driver door request switch is pressed

On

REQ SW -AS

Passenger door request switch is not pressed

Off

Passenger door request switch is pressed

On

REQ SW -BD/TR

Trunk lid opener request switch is not pressed

Off

Trunk lid opener request switch is pressed

On

PUSH SW

Push-button ignition switch (push switch) is not pressed

Off

Push-button ignition switch (push switch) is pressed

On

BCS

BCM

BCS-65

< ECU DIAGNOSIS INFORMATION >

C

D

E

F

G

H

I

J

K

L

B

A

O

P

N

STARTER CUT RELAY

Other than engine cranking

Off

At engine cranking

On

DETECTION SENSOR (BK)

NOTE:
The item is indicated, but not monitored. 

Off

CLUCH SW

The clutch pedal is not depressed. 

Off

The clutch pedal is depressed

On

BRAKE SW 1

• The brake pedal is not depressed and ignition switch ON (MR engine 

with M/T models)

• The brake pedal is depressed and ignition switch ON (Except MR en-

gine with M/T models)

Off

• The brake pedal is depressed and ignition switch ON (MR engine with 

M/T models)

• The brake pedal is not depressed and ignition switch ON (Except MR 

engine with M/T models)

On

BRAKE SW 2

The brake pedal is not depressed

Off

The brake pedal is depressed

On

DETE/CANCL SW

Selector lever in P position

Off

Selector lever in any position other than P

On

START CLUTCH SW

The clutch pedal is depressed

Off

The clutch pedal is not depressed

On

PUSH SW -IPDM

Push-button ignition switch (push-switch) is not pressed

Off

Push-button ignition switch (push-switch) is pressed

On

IGN RLY1 -F/B

Power position in OFF or ACC

Off

Power position in ON

On

NEUTRAL SW - IPDM

• Selector lever in any position other than P and N (CVT models)
• Control lever in any position other than neutral (M/T models)

Off

• Selector lever in P or N position (CVT models)
• Control lever in neutral position (M/T models)

On

SFT PN -IPDM

Selector lever in any position other than P or N

Off

Selector lever in P or N position

On

STARTER RELAY - IPDM

Other than engine cranking

Off

At engine cranking (short cranking)

Crank

Operation prohibited status

Invalid

At engine cranking

On

ENGINE STATE

Engine stopped

STOP

While the engine stalls

STALL

At engine cranking

CRANK

Engine running

RUN

ST/INHI RELAY - IPDM

Power position in OFF

Off, Off

Engine restart

Off, On

At engine cranking

INVALID

Engine running

On, On

REVERSE SIGNAL - IPDM

Selector lever in any position other than R position

Off

Selector lever in R position

On

Monitor Item

Condition

Value/Status