|
|
Content .. 1823 1824 1825 1826 ..
BCS-26 < SYSTEM DESCRIPTION > DIAGNOSIS SYSTEM (BCM) ACTIVE TEST DOOR LOCK : CONSULT Function (BCM - DOOR LOCK) (Type 5) INFOID:0000000010699328 BCM CONSULT FUNCTION CONSULT performs the following functions via CAN communication with BCM. WORK SUPPORT * : P range interlock door lock/unlock can be selected for M/T models, but automatic door lock/unlock function does not operate. DATA MONITOR NOTE: KEY CYL LK-SW NOTE: KEY CYL UN-SW NOTE: VEHICLE SPEED Display the vehicle speed signal received from combination meter by numer- Monitor Item Contents Test item Description DOOR LOCK This test is able to check door lock/unlock operation touched • “BD ULK” is displayed, but cannot be used DOOR LOCK IND NOTE: SUPER LOCK NOTE: Monitor item Description DOOR LOCK-UNLOCK SET Selective unlock function mode can be changed to operation with this mode AUTO UNLOCK TYPE Automatic door unlock function mode can be selected from the following in this mode AUTO LOCK FUNCTION Automatic door lock function mode can be selected from the following in the mode • MODE 2 * : All doors are locked when shifting the selector lever from P position to other than the P position • MODE 3: Non-operation AUTO UNLOCK FUNCTION Automatic door unlock function mode can be selected from the following in this mode • MODE 2 * : All doors are unlocked when shifting the selector lever from any position other than the P to P position • MODE 3: Non-operation SIGNATURE LIGHT SETTING Signature light function can be changed to operation with this mode |