Nissan Juke (2016 year). Service Repair Manual - part 359

EXL-94

< PERIODIC MAINTENANCE >

[XENON TYPE]

FRONT FOG LAMP AIMING ADJUSTMENT

Front fog lamp light distribution on the screen 

JPLIA0008ZZ

A

: Cutoff line

B

: High illuminance area

H

: Horizontal center line of front fog lamp

V

: Vertical center line of front fog lamp

X

: Cutoff line height

Revision: November 2015

2016 JUKE

HEADLAMP

EXL-95

< REMOVAL AND INSTALLATION >

[XENON TYPE]

C

D

E

F

G

H

I

J

K

M

A

B

EXL

N

O

P

REMOVAL AND INSTALLATION

HEADLAMP

Exploded View

INFOID:0000000012201677

REMOVAL

DISASSEMBLY

1.

Headlamp assembly

: Vehicle front

: N·m (kg-m, in-lb)

JMLIA5396GB

Revision: November 2015

2016 JUKE

EXL-96

< REMOVAL AND INSTALLATION >

[XENON TYPE]

HEADLAMP

Removal and Installation

INFOID:0000000012201678

CAUTION:

Disconnect the battery negative terminal or remove power circuit fuse when performing the operation

for preventing electric leakage. Refer to 

EXL-7, "Precautions for Removing Battery Terminal"

.

REMOVAL

1. Remove front bumper fascia. Refer to 

EXT-17, "Removal and Installation"

.

2. Remove headlamp assembly mounting bolts.
3. Pull out headlamp assembly forward the vehicle, and then disconnect the connector before removing the

headlamp assembly.

INSTALLATION

Note the following item, and then install in the reverse order of removal.

CAUTION:

After installation, perform aiming adjustment. Refer to 

EXL-91, "Description"

.

Replacement

INFOID:0000000012201679

CAUTION:

• Disconnect the battery negative terminal or remove power circuit fuse when performing the opera-

tion for preventing electric leakage. Refer to 

EXL-7, "Precautions for Removing Battery Terminal"

.

• After installing the bulb, install the back cover and the bulb socket securely for watertightness.

• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.

• Never touch bulb by hand while it is lit or right after being turned off.

• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect

the performance of lamp. When replacing bulb, be sure to replace it with new one.

XENON BULB (LO)

1.

Headlamp assembly

2.

Xenon bulb (LO)

3.

Back cover A

4.

Halogen bulb (HI)

5.

Back cover B

: Vehicle front

JMLIA5699ZZ

Revision: November 2015

2016 JUKE

HEADLAMP

EXL-97

< REMOVAL AND INSTALLATION >

[XENON TYPE]

C

D

E

F

G

H

I

J

K

M

A

B

EXL

N

O

P

Left Side of The Vehicle

1. Remove fixing clips (A) of air cleaner assembly (1).
2. While pulling up on the (B) portion of the air duct inlet (upper)

(2), disengage of the portion (C), and then remove air duct inlet

(upper) as shown by the arrow in the figure.

3. Remove back cover A.
4. Rotate xenon bulb socket counterclockwise and unlock it.
5. Remove retaining spring lock, and then remove xenon bulb from headlamp assembly.

Right Side of The Vehicle

1. Remove washer tank inlet. Refer to 

WW-43, "Removal and Installation"

.

2. Remove back cover A.
3. Rotate xenon bulb socket counterclockwise and unlock it.
4. Remove retaining spring lock, and then remove xenon bulb from headlamp assembly.

CAUTION:

Never break xenon bulb ceramic tube when replacing bulb.

HALOGEN BULB (HI)

Left Side of The Vehicle

1. Remove fixing clips (A) of air cleaner assembly (1).
2. While pulling up on the (B) portion of the air duct inlet (upper)

(2), disengage of the portion (C), and then remove air duct inlet

(upper) as shown by the arrow in the figure.

3. Remove back cover B.
4. Disconnect halogen bulb harness connector.
5. Rotate halogen bulb clockwise and unlock it, and then remove halogen bulb from headlamp assembly.

Right Side of The Vehicle

1. Remove washer tank inlet. Refer to 

WW-43, "Removal and Installation"

.

2. Remove back cover B.
3. Disconnect halogen bulb harness connector.
4. Rotate halogen bulb counterclockwise and unlock it, and then remove halogen bulb from headlamp

assembly.

Disassembly and Assembly

INFOID:0000000012201680

DISASSEMBLY

1. Remove back cover (A and B).
2. Rotate xenon bulb socket counterclockwise and unlock it.
3. Remove retaining spring lock, and then remove xenon bulb from headlamp assembly.

: Vehicle front

JMLIA5700ZZ

: Vehicle front

JMLIA5700ZZ

Revision: November 2015

2016 JUKE

EXL-98

< REMOVAL AND INSTALLATION >

[XENON TYPE]

HEADLAMP

4. Disconnect halogen bulb harness connector.
5. Remove halogen bulb.

Left side of the vehicle

• Rotate halogen bulb clockwise and unlock it, and then remove halogen bulb from headlamp assembly.

Right side of the vehicle

• Rotate halogen bulb counterclockwise and unlock it, and then remove halogen bulb from headlamp

assembly.

ASSEMBLY

Assemble in the reverse order of disassembly.

Revision: November 2015

2016 JUKE

FRONT COMBINATION LAMP

EXL-99

< REMOVAL AND INSTALLATION >

[XENON TYPE]

C

D

E

F

G

H

I

J

K

M

A

B

EXL

N

O

P

FRONT COMBINATION LAMP

Exploded View

INFOID:0000000012201681

REMOVAL

DISASSEMBLY

1.

Front combination lamp

: N·m (kg-m, in-lb)

JMLIA5399GB

JMLIA6148ZZ

Revision: November 2015

2016 JUKE

EXL-100

< REMOVAL AND INSTALLATION >

[XENON TYPE]

FRONT COMBINATION LAMP

Removal and Installation

INFOID:0000000012201682

CAUTION:

Disconnect the battery negative terminal or remove power circuit fuse when performing the operation

for preventing electric leakage. Refer to 

EXL-7, "Precautions for Removing Battery Terminal"

.

REMOVAL

1. Remove front bumper fascia. Refer to 

EXT-17, "Removal and Installation"

.

2. Remove front combination lamp mounting bolts and nut.
3. Pull out front combination lamp forward the vehicle, and then disconnect connector before removing the

front combination lamp.

INSTALLATION

Note the following item, and then install in the reverse order of removal.

CAUTION:

Interference of front combination lamp lens with front fender may cause intrusion of water into front

combination lamp or rusting of fender due to damage of painted surface. Be careful to operate without

allowing parts to interfere with each other.

Replacement

INFOID:0000000012201683

CAUTION:

• Disconnect the battery negative terminal or remove power circuit fuse when performing the opera-

tion for preventing electric leakage. Refer to 

EXL-7, "Precautions for Removing Battery Terminal"

.

• After installing the bulb, install the bulb socket securely for watertightness.

• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.

• Never touch bulb by hand while it is lit or right after being turned off.

• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect

the performance of lamp. When replacing bulb, be sure to replace it with new one.

PARKING LAMP BULB

CAUTION:

Replacement of a single part is not possible due to the adoption of LED. For replacement, replace

front combination lamp as a set. Refer to 

EXL-100, "Removal and Installation"

.

FRONT TURN SIGNAL LAMP BULB

1. Rotate the front turn signal lamp bulb socket counterclockwise and unlock it.
2. Remove front turn signal lamp bulb from the front turn signal lamp bulb socket.

FRONT SIDE MARKER LAMP BULB

1. Rotate the front side marker lamp bulb socket counterclockwise and unlock it.
2. Remove front side marker lamp bulb from the front side marker lamp bulb socket.

Disassembly and Assembly

INFOID:0000000012201684

DISASSEMBLY

1. Rotate the front turn signal lamp bulb socket counterclockwise and unlock it.
2. Remove front turn signal lamp bulb from the front turn signal lamp bulb socket.
3. Rotate the front side marker lamp bulb socket counterclockwise and unlock it.
4. Remove front side marker lamp bulb from the front side marker lamp bulb socket.

ASSEMBLY

Note the following item, and then assemble in the reverse order of disassembly.

CAUTION:

After installing the bulb, install the bulb socket securely for watertightness.

1.

Front combination lamp

2.

Front turn signal lamp bulb

3.

Front turn signal lamp bulb socket

4.

Front side marker lamp bulb

5.

Front side marker lamp bulb socket

: Vehicle front

Revision: November 2015

2016 JUKE

DAYTIME RUNNING LIGHT

EXL-101

< REMOVAL AND INSTALLATION >

[XENON TYPE]

C

D

E

F

G

H

I

J

K

M

A

B

EXL

N

O

P

DAYTIME RUNNING LIGHT

Exploded View

INFOID:0000000012201685

Removal and Installation

INFOID:0000000012201686

CAUTION:

Disconnect the battery negative terminal or remove power circuit fuse when performing the operation

for preventing electric leakage. Refer to 

EXL-7, "Precautions for Removing Battery Terminal"

.

REMOVAL

1. Remove front bumper fascia lower. Refer to 

EXT-17, "Removal and Installation"

.

2. Disconnect daytime running light harness connector.
3. Remove daytime running light mounting nuts.
4. Remove daytime running light from front bumper fascia lower.

INSTALLATION

Install in the reverse order of removal.

Replacement

INFOID:0000000012201687

CAUTION:

Disconnect the battery negative terminal or remove power circuit fuse when performing the operation

for preventing electric leakage. Refer to 

EXL-7, "Precautions for Removing Battery Terminal"

.

DAYTIME RUNNING LIGHT

CAUTION:

Replacement of a single part is not possible due to the adoption of LED. For replacement, replace day-

time running light as a set. Refer to 

EXL-101, "Removal and Installation"

.

1.

Daytime running light 

2.

Front bumper fascia assembly

3.

U nut

4

Harness connector assembly

N·m (kg-m, in-lb)

JMLIA3676GB

Revision: November 2015

2016 JUKE