Nissan Juke (2016 year). Service Repair Manual - part 99

 

  Index      Manuals     Nissan Juke (2016 year) - Service and Repair Manual

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

Content      ..     97      98      99      100     ..

 

 

Nissan Juke (2016 year). Service Repair Manual - part 99

 

 

REAR WINDOW DEFOGGER SWITCH

DEF-19

< DTC/CIRCUIT DIAGNOSIS >

C

D

E

F

G

H

I

J

K

M

A

B

DEF

N

O

P

DTC/CIRCUIT DIAGNOSIS

REAR WINDOW DEFOGGER SWITCH

WITH AUTO A/C
WITH AUTO A/C : Description

INFOID:0000000012196824

• The rear window defogger is operated by turning the rear window defogger switch ON.

• The indicator lamp in the rear window defogger switch illuminates when the rear window defogger is operat-

ing.

WITH AUTO A/C : Component Function Check

INFOID:0000000012196825

1.

CHECK REAR WINDOW DEFOGGER SWITCH FUNCTION

Check that the indicator lamp of rear window defogger illuminates when rear window defogger switch ON.
Is the inspection result normal?

YES

>> Rear window defogger switch function is OK.

NO

>> Refer to 

DEF-19, "WITH AUTO A/C : Diagnosis Procedure"

.

WITH AUTO A/C : Diagnosis Procedure

INFOID:0000000012196826

1.

CHECK MULTI DISPLAY UNIT (REAR WINDOW DEFOGGER SWITCH)

Does multi display unit (rear window defogger switch) operate normally?

Refer to 

DEF-19, "WITH AUTO A/C : Description"

.

Is the inspection result normal?

YES

>> INSPECTION END

NO

>> Replace multi display unit (rear window defogger switch). Refer to 

HAC-93, "Removal and Instal-

lation"

.

WITHOUT AUTO A/C
WITHOUT AUTO A/C : Description

INFOID:0000000012196827

• The rear window defogger is operated by turning the rear window defogger switch ON.

• The indicator lamp in the rear window defogger switch illuminates when the rear window defogger is operat-

ing.

WITHOUT AUTO A/C : Component Function Check

INFOID:0000000012196828

1.

CHECK FUNCTION

Check (REAR DEF SW) in BCM “DATA MONITOR” mode using CONSULT when rear window defogger switch

is ON.
Is the inspection result normal?

YES

>> Rear window defogger switch function is OK.

NO

>> Refer to 

DEF-19, "WITHOUT AUTO A/C : Diagnosis Procedure"

.

WITHOUT AUTO A/C : Diagnosis Procedure

INFOID:0000000012196829

1.

CHECK BCM OUTPUT SIGNAL

1. Turn ignition switch OFF.

2. Disconnect A/C control connector.

3. Check voltage between A/C control harness connector and ground.

(+)

(–)

Voltage (V)

(Approx.)

A/C control

Connector

Terminal

M53

3

Ground

Battery voltage

Revision: November 2015

2016 JUKE

DEF-20

< DTC/CIRCUIT DIAGNOSIS >

REAR WINDOW DEFOGGER SWITCH

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> GO TO 2.

2.

CHECK REAR WINDOW DEFOGGER SWITCH CIRCUIT

1. Disconnect BCM connector.

2. Check continuity between BCM harness connector and A/C control harness connector.

3. Check continuity between BCM harness connector and ground.

Is the inspection result normal?

YES

>> Replace BCM. Refer to 

BCS-94, "Removal and Installation"

 (With Intelligent Key system)y sys-

tem).

NO

>> Repair or replace harness.

3.

CHECK GROUND CIRCUIT

Check continuity between A/C control harness connector and ground.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace harness.

4.

CHECK REAR WINDOW DEFOGGER SWITCH

Refer to 

DEF-20, "WITHOUT AUTO A/C : Component Inspection"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Replace A/C control. Refer to 

HAC-151, "Removal and Installation"

.

5.

CHECK INTERMITTENT INCIDENT

Refer to 

GI-45, "Intermittent Incident"

.

Is the inspection result normal?

>> INSPECTION END

WITHOUT AUTO A/C : Component Inspection

INFOID:0000000012196830

1.

CHECK REAR WINDOW DEFOGGER SWITCH

1. Turn ignition switch OFF.

2. Disconnect A/C control connector.

3. Check continuity between A/C control terminals.

BCM

A/C control

Continuity 

Connector

Terminal

Connector

Terminal

With Intelligent 
Key system

M68

15

M53

3

Existed

BCM

Ground

Continuity 

Connector

Terminal

With Intelligent Key 
system

M68

15

Not existed

A/C control

Ground

Continuity

Connector

Terminal

M53

8

Existed

Revision: November 2015

2016 JUKE

REAR WINDOW DEFOGGER SWITCH

DEF-21

< DTC/CIRCUIT DIAGNOSIS >

C

D

E

F

G

H

I

J

K

M

A

B

DEF

N

O

P

Is the inspection result normal?

YES

>> INSPECTION END

NO

>> Replace A/C control. Refer to 

HAC-151, "Removal and Installation"

.

A/C control

Condition

Continuity

Terminal

3

8

Rear window defogger switch

Pressed

Existed

Released

Not existed

Revision: November 2015

2016 JUKE

DEF-22

< DTC/CIRCUIT DIAGNOSIS >

REAR WINDOW DEFOGGER RELAY

REAR WINDOW DEFOGGER RELAY

Description

INFOID:0000000012196831

The rear window defogger is operated by turning the rear window defogger switch ON.

Component Function Check

INFOID:0000000012196832

1.

CHECK FUNCTION

1. Perform IPDM E/R Active Test (“REAR DEFOGGER”) using CONSULT.

2. Touch “ON”.

3. Check that the rear window heating wire is getting warmer.
Is the inspection result normal?

YES

>> Rear window defogger relay function is OK.

NO

>> Refer to 

DEF-22, "Diagnosis Procedure"

.

Diagnosis Procedure

INFOID:0000000012196833

1.

CHECK FUSE

1. Turn ignition switch OFF.

2. Check the 15A fuse (No. 41 and 42 located in IPDM E/R).
Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Replace the blown fuse after repairing the affected circuit if a fuse is blown.

2.

CHECK IPDM E/R OUTPUT SIGNAL

1. Perform IPDM E/R Active Test (“REAR DEFOGGER”) using CONSULT.

2. Touch “ON”.

3. Check voltage between IPDM E/R harness connector and ground.

Is the inspection result normal?

YES

>> INSPECTION END

NO

>> Replace IPDM E/R. Refer to 

PCS-37, "Removal and Installation"

 (With Intelligent Key system).

(+)

(

−

)

CONSULT Active Test condition

Voltage (V)

(Approx.)

IPDM E/R

Connector

Terminal

E11

14

Ground

REAR DEFOGGER

ON

Battery voltage

OFF

0

Revision: November 2015

2016 JUKE

REAR WINDOW DEFOGGER

DEF-23

< DTC/CIRCUIT DIAGNOSIS >

C

D

E

F

G

H

I

J

K

M

A

B

DEF

N

O

P

REAR WINDOW DEFOGGER

Description

INFOID:0000000012196834

Heats the heating wire with the power supply from the rear window defogger relay to prevent the rear window

from fogging up.

Component Function Check

INFOID:0000000012196835

1.

CHECK FUNCTION

1. Perform IPDM E/R Active Test (“REAR DEFOGGER”) using CONSULT.

2. Touch “ON”.

3. Check that the rear window heating wire is getting warmer.
Is the inspection result normal?

YES

>> Rear window defogger is OK.

NO

>> Refer to 

DEF-22, "Diagnosis Procedure"

.

Diagnosis Procedure

INFOID:0000000012196836

1.

CHECK REAR WINDOW DEFOGGER POWER SUPPLY CIRCUIT

1. Turn ignition switch OFF.

2. Disconnect rear window defogger connector.

3. Turn ignition switch ON.

4. Check voltage between rear window defogger harness connector and ground.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> GO TO 4.

2.

CHECK REAR WINDOW DEFOGGER GROUND CIRCUIT

1. Turn ignition switch OFF.

2. Check continuity between rear window defogger harness connector and ground.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace harness.

3.

CHECK FILAMENT

Refer to 

DEF-43, "Inspection and Repair"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair filament.

4.

CHECK REAR WINDOW DEFOGGER POWER SUPPLY CIRCUIT 1

1. Turn ignition switch OFF.

2. Disconnect condenser connector.

3. Check continuity between condenser harness connector and rear window defogger harness connector.

(+)

(

−

)

Condition 

Voltage (V)

(Approx.)

Rear window defogger

Connector

Terminal 

D202

1

Ground

Rear window defogger switch

ON

Battery voltage

OFF

0

Rear window defogger

Ground

Continuity 

Connector

Terminal

D203

2

Existed

Revision: November 2015

2016 JUKE

DEF-24

< DTC/CIRCUIT DIAGNOSIS >

REAR WINDOW DEFOGGER

4. Check continuity between condenser connector and ground.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace harness.

5.

CHECK REAR WINDOW DEFOGGER POWER SUPPLY CIRCUIT 2

1. Disconnect IPDM E/R connectors.

2. Check continuity between IPDM E/R harness connector and condenser harness connector.

3. Check continuity between IPDM E/R connector and ground.

Is the inspection result normal?

YES

>> GO TO 6.

NO

>> Repair or replace harness.

6.

CHECK CONDENSER

Refer to 

DEF-24, "Component Inspection"

.

Is the inspection result normal?

YES

>> GO TO 7.

NO

>> Replace condenser. Refer to 

DEF-45, "Removal and Installation"

.

7.

CHECK INTERMITTENT INCIDENT

Refer to 

GI-45, "Intermittent Incident"

.

Is the inspection result normal?

YES

>> INSPECTION END

NO

>> Repair or replace harness or connector.

Component Inspection

INFOID:0000000012196837

1.

CHECK CONDENSER

1. Turn ignition switch OFF.

2. Disconnect condenser connector.

3. Check continuity between condenser connector and ground part of condenser.

4. Check continuity between condenser terminals.

Condenser

Rear window defogger

Continuity 

Connector

Terminal

Connector

Terminal

D201

2

D202

1

Existed

Condenser

Ground

Continuity 

Connector

Terminal

D201

2

Not existed

IPDM E/R

Condenser

Continuity

Connector

Terminal

Connector Terminal

E11

14

D103

1

Existed

IPDM E/R

Ground

Continuity

Connector

Terminal

E11

14

Not existed

Condenser

Ground part of 

condenser

Continuity

Connector

Terminal

D103

1

Not existed

D202

2

Revision: November 2015

2016 JUKE

REAR WINDOW DEFOGGER

DEF-25

< DTC/CIRCUIT DIAGNOSIS >

C

D

E

F

G

H

I

J

K

M

A

B

DEF

N

O

P

Is the inspection result normal?

YES

>> INSPECTION END

NO

>> Replace condenser. Refer to 

DEF-45, "Removal and Installation"

.

Condenser

Continuity

Connector

Terminal

Connector

Terminal

D103

1

D202

2

Existed

Revision: November 2015

2016 JUKE

DEF-26

< DTC/CIRCUIT DIAGNOSIS >

DOOR MIRROR DEFOGGER

DOOR MIRROR DEFOGGER

Description

INFOID:0000000012196838

Heats the heating wire with the power supply from the rear window defogger relay to prevent the door mirror

from fogging up.

Component Function Check

INFOID:0000000012196839

1.

CHECK DOOR MIRROR DEFOGGER

1. Perform IPDM E/R Active Test (“REAR DEFOGGER”) using CONSULT.

2. Touch “ON”.

3. Check that both side door mirror glasses are getting warmer.
Is the inspection result normal?

YES

>> Door mirror defogger is OK.

NO

>> Refer to 

DEF-26, "Diagnosis Procedure"

.

Diagnosis Procedure

INFOID:0000000012196840

1.

CHECK FUSE

1. Turn ignition switch OFF.

2. Check 10A fuse [No.22, located in fuse block (J/B)].
Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Replace the blown fuse after repairing the affected circuit if a fuse is blown.

2.

CHECK DOOR MIRROR DEFOGGER CIRCUIT

1. Disconnect IPDM E/R connector and door mirror (both sides) connector.

2. Check continuity between IPDM E/R harness connector and door mirror (driver side) harness connector.

3. Check continuity between IPDM E/R harness connector and ground.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace harness.

3.

CHECK INTERMITTENT INCIDENT

Check intermittent incident.

Refer to 

GI-45, "Intermittent Incident"

.

>> INSPECTION END

IPDM E/R

Door mirror (driver side)

Continuity

 Connector

Terminal 

Connector

Terminal

E11

14

D30

3

Existed

IPDM E/R

Ground

Continuity 

Connector

Terminal

E11

14

Not existed

Revision: November 2015

2016 JUKE

 

 

 

 

 

 

 

Content      ..     97      98      99      100     ..