Nissan Juke (2016 year). Service Repair Manual - part 15

AV-108

< WIRING DIAGRAM >

[AUDIO WITH NAVIGATION]

NAVIGATION SYSTEM

JRNWF0752GB

Revision: November 2015

2016 JUKE

AV

DIAGNOSIS AND REPAIR WORKFLOW

AV-109

< BASIC INSPECTION >

[AUDIO WITH NAVIGATION]

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

BASIC INSPECTION

DIAGNOSIS AND REPAIR WORKFLOW

NAVIGATION SYSTEM
NAVIGATION SYSTEM : Work Flow

INFOID:0000000012202508

OVERALL SEQUENCE

• Reference 1··· Refer to 

AV-78, "CONSULT Function"

.

• Reference 2··· Refer to 

AV-86, "DTC Index"

.

• Reference 3··· Refer to 

AV-172, "Symptom Table"

.

DETAILED FLOW

1.

INTERVIEW AND SYMPTOM CONFIRMATION

Check the malfunction symptoms by performing the following items. 

• Interview the customer to obtain the malfunction information (conditions and environment when the malfunc-

tion occurred). 

• Check the symptom. 
Is the occurred symptom malfunction?

YES

>> GO TO 2.

NO

>> INSPECTION END

JSNIA4482GB

Revision: November 2015

2016 JUKE

AV-110

< BASIC INSPECTION >

[AUDIO WITH NAVIGATION]

DIAGNOSIS AND REPAIR WORKFLOW

2.

DIAGNOSIS WITH CONSULT

1. Connect CONSULT and perform a self-diagnosis for “MULTI AV”. Refer to 

AV-78, "CONSULT Function"

.

NOTE:

Skip to step 4 of the diagnosis procedure if “MULTI AV” is not displayed.

2. When DTC is detected, follow the instructions below:

-

Record DTC and Freeze Frame Data.

Is DTC displayed?

YES

>> GO TO 3.

NO

>> GO TO 4.

3.

TROUBLE DIAGNOSIS FOR DTC

1. Check the DTC indicated in the self-diagnosis results.

2. Perform the relevant diagnosis referring to the DTC Index. Refer to 

AV-86, "DTC Index"

.

>> GO TO 5.

4.

TROUBLE DIAGNOSIS FOR SYMPTOMS

Perform the relevant diagnosis referring to the diagnosis chart by symptom. Refer to 

AV-172, "Symptom

Table"

.

>> GO TO 5.

5.

ERROR PART REPAIR

1. Repair or replace the identified malfunctioning parts.

2. Perform a self-diagnosis for “MULTI AV” with CONSULT.

NOTE:

Erase the stored self-diagnosis results after repairing or replacing the relevant components if any DTC

has been indicated in the self-diagnosis results. 

3. Check that the symptom does not occur.
Does the symptom occur?

YES

>> GO TO 1.

NO

>> INSPECTION END

AROUND VIEW MONITOR SYSTEM

Revision: November 2015

2016 JUKE

AV

DIAGNOSIS AND REPAIR WORKFLOW

AV-111

< BASIC INSPECTION >

[AUDIO WITH NAVIGATION]

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

AROUND VIEW MONITOR SYSTEM : Work Flow

INFOID:0000000012202509

OVERALL SEQUENCE

• Reference 1··· Refer to 

AV-80, "CONSULT Function"

.

• Reference 2··· Refer to 

AV-93, "DTC Index"

.

• Reference 3··· Refer to 

AV-172, "Symptom Table"

.

DETAILED FLOW

1.

INTERVIEW AND SYMPTOM CONFIRMATION

Check the malfunction symptoms by performing the following items. 

• Interview the customer to obtain the malfunction information (conditions and environment when the malfunc-

tion occurred). 

• Check the symptom. 
Is the occurred symptom malfunction?

YES

>> GO TO 2.

NO

>> INSPECTION END

2.

DIAGNOSIS WITH CONSULT

1. Connect CONSULT and perform a self-diagnosis for “AVM”. Refer to 

AV-80, "CONSULT Function"

.

NOTE:

Skip to step 4 of the diagnosis procedure if “AVM” is not displayed.

2. When DTC is detected, follow the instructions below:

JSNIA4482GB

Revision: November 2015

2016 JUKE

AV-112

< BASIC INSPECTION >

[AUDIO WITH NAVIGATION]

DIAGNOSIS AND REPAIR WORKFLOW

-

Record DTC and Freeze Frame Data.

Is DTC displayed?

YES

>> GO TO 3.

NO

>> GO TO 4.

3.

TROUBLE DIAGNOSIS FOR DTC

1. Check the DTC indicated in the self-diagnosis results.

2. Perform the relevant diagnosis referring to the DTC Index. Refer to 

AV-93, "DTC Index"

.

>> GO TO 5.

4.

TROUBLE DIAGNOSIS FOR SYMPTOMS

Perform the relevant diagnosis referring to the diagnosis chart by symptom. Refer to 

AV-172, "Symptom

Table"

.

>> GO TO 5.

5.

ERROR PART REPAIR

1. Repair or replace the identified malfunctioning parts.

2. Perform a self-diagnosis for “AVM” with CONSULT.

NOTE:

Erase the stored self-diagnosis results after repairing or replacing the relevant components if any DTC

has been indicated in the self-diagnosis results. 

3. Check that the symptom does not occur.
Does the symptom occur?

YES

>> GO TO 1.

NO

>> INSPECTION END

Revision: November 2015

2016 JUKE

AV

INSPECTION AND ADJUSTMENT

AV-113

< BASIC INSPECTION >

[AUDIO WITH NAVIGATION]

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

INSPECTION AND ADJUSTMENT

ADDITIONAL SERVICE WHEN REPLACING NAVI CONTROL UNIT
ADDITIONAL SERVICE WHEN REPLACING NAVI CONTROL UNIT : Description

INFOID:0000000012202510

Perform the following operations when replacing NAVI control unit.

Configuration, refer to 

AV-113, "CONFIGURATION (NAVI CONTROL UNIT) : Description"

.

ADDITIONAL SERVICE WHEN REPLACING AROUND VIEW MONITOR CON-
TROL UNIT
ADDITIONAL SERVICE WHEN REPLACING AROUND VIEW MONITOR CONTROL 
UNIT : Description

INFOID:0000000012202511

Perform the calibrating camera image when replacing around view monitor control unit. Refer to 

AV-116,

"CALIBRATING CAMERA IMAGE (AROUND VIEW MONITOR) : Work Procedure"

.

CONFIGURATION (NAVI CONTROL UNIT)
CONFIGURATION (NAVI CONTROL UNIT) : Description

INFOID:0000000012202512

• Since vehicle specifications are not included in the NAVI control unit after replacement, it is required to write

vehicle specifications with CONSULT. Refer to 

AV-113, "CONFIGURATION (NAVI CONTROL UNIT) : Spe-

cial Repair Requirement"

.

• The NAVI control unit configuration includes functions as follows.

CONFIGURATION (NAVI CONTROL UNIT) : Special Repair Requirement

INFOID:0000000012202513

1.

SAVING VEHICLE SPECIFICATION

CONSULT Configuration

Perform “Before Replace ECU”, and save the current vehicle specification in CONSULT.
Is the vehicle specification saved normally?

YES

>> GO TO 2.

NO

>> GO TO 4.

2.

REPLACE NAVI CONTROL UNIT

Replace NAVI control unit. Refer to 

AV-182, "Removal and Installation"

.

>> GO TO 3.

3.

WRITING VEHICLE SPECIFICATION

CONSULT Configuration

Select “Configuration” or “After Replace ECU”, and write the vehicle specification saved in CONSULT to NAVI

control unit.

>> GO TO 6.

4.

REPLACE NAVI CONTROL UNIT

Replace NAVI control unit. Refer to 

AV-182, "Removal and Installation"

.

Function

Description

Read/Write Configuration

Before Replace ECU

Allows the reading of vehicle specification written in NAVI control 
unit to store the specification in CONSULT.

After Replace ECU

Allows the writing of the vehicle information stored in CONSULT 
into the NAVI control unit.

Manual Configuration

Allows the writing of the vehicle specification into the NAVI control 
unit by hand.

Revision: November 2015

2016 JUKE

AV-114

< BASIC INSPECTION >

[AUDIO WITH NAVIGATION]

INSPECTION AND ADJUSTMENT

>> GO TO 5.

5.

WRITE VEHICLE SPECIFICATION

CONSULT Configuration

Select “Manual Configuration”, and write the setting value as shown in the following table to NAVI control unit

according to the vehicle specification.

CAUTION:

Grasp vehicle specifications precisely. The control of ECU may not function normally if the specifica-

tions are misread.

NOTE:

• The items shown in this list depend on vehicle specifications.

• The config list may not be displayed depending on vehicle specifications. This is not a malfunction.

• If selection items are not displayed on the CONSULT screen, touch “NEXT”.

>> GO TO 6.

6.

PERFORM SELF-DIAGNOSIS

CONSULT Self Diagnostic Result

Perform self-diagnosis of CONSULT, and check whether or not DTC U12AA is detected.
Is DTC U12AA detected?

YES

>> GO TO 5.

NO

>> GO TO 7.

7.

OPERATION CHECK

Check that the operation of the NAVI control unit is normal.

>> WORK END

CONFIGURATION (AROUND VIEW MONITOR CONTROL UNIT)

MANUAL SETTING ITEM

Detail

Items

Setting value

TRANSMISSION

MT

M/T models

CVT

CVT models

AT

A/T models

OTHER

Except for above

SOUND SYSTEM

BASE

—

BOSE

With BOSE system

BOSE SURROUND

With BOSE surround system

ROCKFORD FOSGATE

Without BOSE system without woof-
er

ROCKFORD SUB WOOFER

Without BOSE system with woofer

CAMERA SYSTEM

NONE

—

AVM

—

NONE/AVM

Without camera system or with 
around view monitor system

REAR

With rear view monitor system

REAR+SIDE

With rear view monitor system and 
front-side view monitor function

AVM+PA

With around view monitor system 
and parking assist function

Revision: November 2015

2016 JUKE

AV

INSPECTION AND ADJUSTMENT

AV-115

< BASIC INSPECTION >

[AUDIO WITH NAVIGATION]

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

CONFIGURATION (AROUND VIEW MONITOR CONTROL UNIT) : Work Procedure

INFOID:0000000012202514

1.

SAVING VEHICLE SPECIFICATION

CONSULT Configuration

Perform “Before Replace ECU”, and save the current vehicle specification in CONSULT.
Is the vehicle specification saved normally?

YES

>> GO TO 2.

NO

>> GO TO 4.

2.

REPLACE AROUND VIEW MONITOR CONTROL UNIT

Replace around view monitor control unit. Refer to 

AV-190, "Removal and Installation"

.

>> GO TO 3.

3.

WRITING VEHICLE SPECIFICATION

CONSULT Configuration

Select “Configuration” or “After Replace ECU”, and write the vehicle specification saved in CONSULT to

around view monitor control unit.

>> GO TO 6.

4.

REPLACE AROUND VIEW MONITOR CONTROL UNIT

Replace around view monitor control unit. Refer to 

AV-190, "Removal and Installation"

.

>> GO TO 5.

5.

WRITE VEHICLE SPECIFICATION

CONSULT Configuration

Select “WRITE CONFIGURATION - Manual selection” and write in the following list at a around view monitor

control unit depending on a vehicle specification.

>> GO TO 6.

6.

PERFORM SELF-DIAGNOSIS

CONSULT Self Diagnostic Result

Perform self-diagnosis of CONSULT, and check whether or not DTC U1305 is detected.
Is DTC U1305 detected?

YES

>> GO TO 5.

NO

>> GO TO 7.

7.

OPERATION CHECK

Check that the operation of the around view monitor control unit and camera images (fixed guide lines and

predictive course lines) are normal.

>> WORK END

PREDICTIVE COURSE LINE CENTER POSITION ADJUSTMENT

Setting item

Detail

Items

Setting value

TRANSMISSION

A/T

CVT models

M/T

M/T models

Revision: November 2015

2016 JUKE