Nissan Juke F15. Manual - part 1332

TM-518

< DTC/CIRCUIT DIAGNOSIS >

[CVT: RE0F10D]

P0967 PRESSURE CONTROL SOLENOID B

NO

>> There is malfunction of primary pressure solenoid valve. Replace transaxle assembly. Refer to

TM-577, "Removal and Installation"

.

P17F0 CVT JUDDER (T/M INSPECTION)

TM-519

< DTC/CIRCUIT DIAGNOSIS >

[CVT: RE0F10D]

C

E

F

G

H

I

J

K

L

M

A

B

TM

N

O

P

P17F0 CVT JUDDER (T/M INSPECTION)

DTC Description

INFOID:0000000013014558

DTC DETECTION LOGIC

POSSIBLE CAUSE

Transmission assembly

FAIL-SAFE

Not changed from normal driving

DTC CONFIRMATION PROCEDURE

CAUTION:

•

TM-519, "Diagnosis Procedure"

 must be performed before starting “DTC CONFIRMATION PROCE-

DURE”.

• Always drive vehicle at a safe speed.

1.

PREPARATION BEFORE WORK

If another "DTC CONFIRMATION PROCEDURE" occurs just before, turn ignition switch OFF and wait for at

least 10 seconds, then perform the next test.

>> GO TO 2.

2.

CHECK DTC DETECTION

1. With the throttle position 1/8, accelerate the vehicle from 0 km/h (0 MPH) to 50 km/h (31 MPH).

2. Drive the vehicle at 50 km/h (31 MPH) constant speed for 15 seconds.

3. Stop the vehicle with a brake force which allows the vehicle to stop in 10 to 20 seconds.

4. Repeat steps 1 to 3 above 5 times.
Is “P17F0” detected?

YES

>> Go to 

TM-519, "Diagnosis Procedure"

.

NO

>> INSPECTION END

Diagnosis Procedure

INFOID:0000000013014559

1.

REPLACE TRANSAXLE ASSEMBLY

Replace the transaxle assembly. Refer to 

TM-577, "Removal and Installation"

.

>> END

DTC

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

P17F0

CVT JUDDER (T/M INSPECTION)
[CVT Judder (Transmission inspection)]

Diagnosis condition

—

Signal

—

Threshold

Malfunction in chain belt and pulley

Diagnosis delay time

—

TM-520

< DTC/CIRCUIT DIAGNOSIS >

[CVT: RE0F10D]

P17F1 CVT JUDDER (C/V INSPECTION)

P17F1 CVT JUDDER (C/V INSPECTION)

DTC Description

INFOID:0000000013014560

DTC DETECTION LOGIC

CAUTION:

If DTC P17F1 is displayed with DTC P17F0, perform only trouble diagnosis of DTC P17F0. Refer to 

TM-

519, "DTC Description"

.

POSSIBLE CAUSE

Control valve

FAIL-SAFE

Not changed from normal driving

DTC CONFIRMATION PROCEDURE

CAUTION:

•

TM-520, "Diagnosis Procedure"

 must be performed before starting “DTC CONFIRMATION PROCE-

DURE”.

• Always drive vehicle at a safe speed.

1.

PREPARATION BEFORE WORK

If another "DTC CONFIRMATION PROCEDURE" occurs just before, turn ignition switch OFF and wait for at

least 10 seconds, then perform the next test.

>> GO TO 2.

2.

CHECK DTC DETECTION

1. With the throttle position 1/8, accelerate the vehicle from 0 km/h (0 MPH) to 50 km/h (31 MPH).

2. Drive the vehicle at 50 km/h (31 MPH) constant speed for 15 seconds.

3. Stop the vehicle with a brake force which allows the vehicle to stop in 10 to 20 seconds.

4. Repeat steps 1 to 3 above 5 times.
Is “P17F1” detected?

YES

>> Go to 

TM-520, "Diagnosis Procedure"

.

NO

>> INSPECTION END

Diagnosis Procedure

INFOID:0000000013014561

1.

REPLACE TRANSAXLE ASSEMBLY

There is malfunction of control valve. Replace the transaxle assembly. Refer to 

TM-577, "Removal and Instal-

lation"

.

>> END

DTC

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

P17F1

CVT JUDDER (C/V INSPECTION)
[CVT judder (Control Valve Inspection)]

Diagnosis condition

—

Signal

—

Threshold

Malfunction in control valve

Diagnosis delay time

—

P17F2 CVT JUDDER (T/C INSPECTION)

TM-521

< DTC/CIRCUIT DIAGNOSIS >

[CVT: RE0F10D]

C

E

F

G

H

I

J

K

L

M

A

B

TM

N

O

P

P17F2 CVT JUDDER (T/C INSPECTION)

DTC Description

INFOID:0000000013014562

DTC DETECTION LOGIC

POSSIBLE CAUSE

Torque converter

FAIL-SAFE

Not changed from normal driving

DTC CONFIRMATION PROCEDURE

CAUTION:

•

TM-521, "Diagnosis Procedure"

 must be performed before starting “DTC CONFIRMATION PROCE-

DURE”.

• Always drive vehicle at a safe speed.

1.

PREPARATION BEFORE WORK

If another "DTC CONFIRMATION PROCEDURE" occurs just before, turn ignition switch OFF and wait for at

least 10 seconds, then perform the next test.

>> GO TO 2.

2.

CHECK DTC DETECTION

1. With the throttle position 1/8, accelerate the vehicle from 0 km/h (0 MPH) to 50 km/h (31 MPH).

2. Drive the vehicle at 50 km/h (31 MPH) constant speed for 15 seconds.

3. Stop the vehicle with a brake force which allows the vehicle to stop in 10 to 20 seconds.

4. Repeat steps 1 to 3 above 5 times.
Is “P17F2” detected?

YES

>> Go to 

TM-521, "Diagnosis Procedure"

.

NO

>> INSPECTION END

Diagnosis Procedure

INFOID:0000000013014563

1.

REPLACE TORQUE CONVERTER

Replace the torque converter. Refer to 

TM-581, "Disassembly"

.

>> END

DTC

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

P17F2

CVT JUDDER (T/C INSPECTION)
[CVT judder (Torque Converter Inspec-
tion)]

Diagnosis condition

—

Signal

—

Threshold

Malufunction in torque converter

Diagnosis delay time

—