SRS AIR BAG DIAGNOSIS
TSB Revision
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
52B-395
STEP 1. Using scan tool MB991958, diagnose the CAN bus
line.
CAUTION
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before con-
necting or disconnecting scan tool MB991958.
(1) Connect scan tool MB991958. Refer to "How to connect the
Scan Tool (M.U.T.-III)
P.52B-28
."
(2) Turn the ignition switch to the "ON" position.
(3) Diagnose the CAN bus line.
(4) Turn the ignition switch to the "LOCK" (OFF) position.
Q: Is the CAN bus line found to be normal?
YES : Go to Step 2.
NO : Repair the CAN bus line (Refer to GROUP 54C,
Diagnosis
P.54C-17
).
STEP 2. Using scan tool MB991958, read the SRS-ECU
diagnostic trouble code.
Check again if the DTC is set to the SRS-ECU.
Q: Is the DTC set?
YES : Diagnose the SRS-ECU. Then go to Step 4.
NO : Go to Step 3.
STEP 3. Using scan tool MB991958, read diagnostic
trouble code No. U0151 for other system.
Check if the DTC U0151 is set in ETACS-ECU, combination
meter, A/C-ECU, KOS-ECU or WCM, hands free module, CAN
box unit, radio and CD player, satellite radio tuner.
Q: Is the DTC set?
YES : Replace the SRS-ECU (Refer to GROUP 52B,
SRS-ECU
P.52B-436
).
NO : Go to Step 4.
ZC501967
AC404789
AC701411AB
MB991824
MB991827
MB991910
Data link
connector