|
|
SPECIAL TOOL TSB Revision INTAKE AND EXHAUST 15-3 INSPECTION PROCEDURE 2: Abnormal Noise DIAGNOSIS STEP 1. Start the engine. Have an assistant stay Q: Is any abnormal noise generated? YES : Go to Step 2. NO : The procedure is complete. STEP 2. Check for missing parts in the muffler. Q: Are there any missing parts in the muffler? YES : Replace, then go to Step 1. NO : Go to Step 3. STEP 3. Check the hanger for cracks. Q: Is the hanger cracked? YES : Replace, then go to Step 1. NO : Go to Step 4. STEP 4. Check for interference of the pipes and Q: Are the pipes and muffler interfering with the body? YES : Repair, then go to Step 1. NO : Go to Step 5. STEP 5. Check the heat protectors. Q: Are any heat protectors loose or damaged? YES : Tighten or replace, then go to Step 1. NO : Go to Step 6. STEP 6. Check the pipes, catalytic converters Q: Are the pipes, catalytic converters and muffler damaged? YES : Replace, then go to Step 1 (For the removal of the catalytic converter, refer to GROUP ). NO : There is no action to be taken. SPECIAL TOOL M1151000600281 TOOL TOOL NUMBER AND SUPERSESSION APPLICATION MD998770 MD998770-01 or General Removal and installation |