Mitsubishi Montero (1998+). Manual - part 128

                                                     replacement.

Terminal burned, not

 affecting performance  ..  2  ..  Suggest repair or replacement.

Terminal corroded,

 affecting performance  ..  A  ..  Require repair or replacement.

Terminal corroded, not

 affecting performance  ..  2  ..  Suggest repair or replacement.

Terminal loose, affecting

 performance  ............  B  ..  Require repair or replacement.

Terminal loose, not

 affecting performance  ..  1  ..  Suggest repair or replacement.

Wire lead burned  ........  A  ..  Require repair or replacement.

Wire lead conductors

 exposed  ................  B  ..  Require repair or replacement.

Wire lead open  ..........  A  ..  Require repair or replacement.

Wire lead shorted  .......  A  ..  Require repair or replacement.

(1) - Determine cause and correct prior to repair or

      replacement of part.

(2) - Inoperative includes intermittent operation.

         MOTORS

MOTOR INSPECTION

Condition                 Code                          Procedure

Amperage draw out of

 specification  ..........  A  ..  Require repair or replacement.

Attaching hardware

 broken  .................  A  ...  Require repair or replacement

                                                     of hardware.

Attaching hardware

 missing  ................  C  ..........  Require replacement of

                                                        hardware.

Attaching hardware not

 functioning  ............  A  ...  Require repair or replacement

                                                     of hardware.

Bracket bent  ............  A  ..  Require repair or replacement.

Bracket broken  ..........  A  ..  Require repair or replacement.

Bracket cracked  .........  A  ..  Require repair or replacement.

Bracket holes elongated,

 affecting performance  ..  A  ..  Require repair or replacement.

Bracket holes elongated,

 not affecting

 performance  ............  ..  .......  No service suggested or

                                                        required.

Bracket missing  .........  C  ............  Require replacement.

Connector broken  ........  A  ..  Require repair or replacement.

Connector (Weatherpack

 type) leaking  ..........  A  ..  Require repair or replacement.

Connector melted  ........  A  ...........  ( 1) Require repair or

                                                     replacement.

Connector missing  .......  C  ............  Require replacement.

Drive mechanism damaged,

 affecting performance  ..  A  ...........  ( 2) Require repair or

                                                     replacement.

Drive mechanism damaged,

 not affecting

 performance  ............  2  ...........  ( 2) Suggest repair or

                                                     replacement.

Fails to disengage  ......  A  ..  Require repair or replacement.

Housing broken, affecting

 performance  ............  2  ..  Suggest repair or replacement.

Housing broken, not

 affecting performance  ..  ..  .......  No service suggested or

                                                        required.

Housing cracked, affecting

 performance  ............  A  ..  Require repair or replacement.

Housing cracked, not

 affecting performance  ..  1  ..  Suggest repair or replacement.

Inoperative  .............  A  ...........  ( 3) Require repair or

                                                     replacement.

Linkage bent, affecting

 performance  ............  A  ...  Require repair or replacement

                                                      of linkage.

Linkage bent, not

 affecting performance  ..  ..  ........  No service suggested or

                                                        required.

Linkage binding, affecting

 performance  ............  A  ...  Require repair or replacement

                                                      of linkage.

Linkage binding, not

 affecting performance  ..  2  ...  Suggest repair or replacement

                                                      of linkage.

Linkage broken  ..........  A  ...  Require repair or replacement

                                                      of linkage.

Linkage loose, affecting

 performance  ............  A  ...  Require repair or replacement

                                                      of linkage.

Linkage loose, not

 affecting performance  ..  1  ...  Suggest repair or replacement

                                                      of linkage.

Linkage missing  .........  C  ............  Require replacement.

Linkage noisy  ...........  2  ..  Suggest repair or replacement.

Missing  .................  C  ............  Require replacement.

Noisy  ...................  2  ..  Suggest repair or replacement.

Out of adjustment  .......  B  ..........  ( 4) Further inspection

                                                        required.

Resistance out of

 specification  ..........  A  ..  Require repair or replacement.

Terminal broken  .........  A  ..  Require repair or replacement.

Terminal burned, affecting

 performance  ............  A  ...........  ( 1) Require repair or

                                                     replacement.

Terminal burned, not

 affecting performance  ..  2  ..  Suggest repair or replacement.

Terminal corroded,

 affecting performance  ..  A  ..  Require repair or replacement.

Terminal corroded, not

 affecting performance  ..  2  ..  Suggest repair or replacement.

Terminal loose, affecting

 performance  ............  B  ..  Require repair or replacement.

Terminal loose, not

 affecting performance  ..  1  ..  Suggest repair or replacement.

Wire lead burned  ........  A  ..  Require repair or replacement.

Wire lead conductors

 exposed  ................  B  ..  Require repair or replacement.

Wire lead open  ..........  A  ..  Require repair or replacement.

Wire lead shorted  .......  A  ..  Require repair or replacement.

(1) - Determine cause and correct prior to repair or

      replacement of part.

(2) - Further inspection required to determine cause.

(3) - Inoperative includes intermittent operation.

(4) - Follow OEM recommended adjustment procedures. Repair or

      replace if out of specification.

         NEUTRAL SAFETY SWITCHES

         See SWITCHES.

         ODOMETERS

         See GAUGES.

         ODOMETERS, SPEEDOMETERS AND TACHOMETERS (CABLE-DRIVEN)

ODOMETER, SPEEDOMETER AND TACHOMETER (CABLE-DRIVEN) INSPECTION

Condition                 Code                          Procedure

Attaching hardware

 broken  .................  A  ...  Require repair or replacement

                                                     of hardware.

Attaching hardware

 missing  ................  C  ..........  Require replacement of

                                                        hardware.

Attaching hardware not

 functioning  ............  A  ...  Require repair or replacement

                                                     of hardware.

Connector broken  ........  A  ..  Require repair or replacement.

Connector (Weatherpack

 type) leaking  ..........  A  ..  Require repair or replacement.

Connector melted  ........  A  ...........  ( 1) Require repair or

                                                     replacement.

Connector missing  .......  C  ............  Require replacement.

Drive cable broken  ......  A  ............  Require replacement.

Drive cable noisy  .......  2  ..  Suggest repair or replacement.

Inoperative  .............  A  ..........  ( 2) Further inspection

                                                        required.

Leaking  .................  A  ............  Require replacement.

Lens broken  .............  A  ...........  ( 3) Require repair or

                                                     replacement.

Lens cloudy  .............  2  ...........  ( 3) Suggest repair or

                                                     replacement.

Lens missing  ............  C  ...........  ( 3) Require repair or

                                                     replacement.

Noisy  ...................  2  ..  Suggest repair or replacement.

Terminal broken  .........  A  ..  Require repair or replacement.

Terminal burned, affecting

 performance  ............  A  ...........  ( 1) Require repair or

                                                     replacement.

Terminal burned, not

 affecting performance  ..  2  ..  Suggest repair or replacement.

Terminal corroded,

 affecting performance  ..  A  ..  Require repair or replacement.

Terminal corroded, not

 affecting performance  ..  2  ..  Suggest repair or replacement.

Terminal loose, affecting

 performance  ............  B  ..  Require repair or replacement.

Terminal loose, not

 affecting performance  ..  1  ..  Suggest repair or replacement.

(1) - Determine cause and correct prior to repair or

      replacement of part.

(2) - If lens is available as a separate part, require

      replacement of lens only.

(3) - Includes inoperative, intermittent operation, failure

      to perform all functions, out of OEM specification,

      or out of range.

         PULLEYS

PULLEY INSPECTION

Condition                 Code                          Procedure

Alignment incorrect  .....  B  ..  Require repair or replacement.

Application incorrect  ...  B  ............  Require replacement.

Attaching hardware

 broken  .................  A  ...  Require repair or replacement

                                                     of hardware.

Attaching hardware

 missing  ................  C  ..........  Require replacement of

                                                        hardware.

Attaching hardware not

 functioning  ............  A  ...  Require repair or replacement

                                                     of hardware.

Bent  ....................  A  ............  Require replacement.

Cracked  .................  A  ............  Require replacement.

Loose  ...................  A  ..  Require repair or replacement.

Missing  .................  C  ............  Require replacement.

Pulley damaged, affecting

 belt life  ..............  A  ............  Require replacement.

         RECEIVERS, AMPLIFIERS, EQUALIZERS AND SUB-WOOFER VOLUME

         CONTROLS

RECEIVER, AMPLIFIER, EQUALIZER AND SUB-WOOFER VOLUME CONTROL

INSPECTION

Condition                 Code                          Procedure

Attaching hardware

 broken  .................  A  ...  Require repair or replacement

                                                     of hardware.

Attaching hardware

 missing  ................  C  ..........  Require replacement of

                                                        hardware.

Attaching hardware not

 functioning  ............  A  ...  Require repair or replacement

                                                     of hardware.

Connector broken  ........  A  ..  Require repair or replacement.

Connector melted  ........  A  ...........  ( 1) Require repair or

                                                     replacement.

Connector missing  .......  C  ............  Require replacement.

Malfunctioning  ..........  A  ...........  ( 2) Require repair or

                                                     replacement.

Missing  .................  C  ............  Require replacement.

Sound quality poor  ......  A  ...........  ( 3) Require repair or

                                                     replacement.

Terminal broken  .........  A  ..  Require repair or replacement.

Terminal burned, affecting

 performance  ............  A  ...........  ( 1) Require repair or

                                                     replacement.

Terminal burned, not

 affecting performance  ..  2  ..  Suggest repair or replacement.