Mitsubishi Montero (1998+). Manual - part 122

                                                        hardware.

Attaching hardware not

 functioning  ............  A  ...  Require repair or replacement

                                                     of hardware.

Connector broken  ........  A  ..  Require repair or replacement.

Connector (Weatherpack

 type) leaking  ..........  A  ..  Require repair or replacement.

Connector melted  ........  A  ...........  ( 1) Require repair or

                                                     replacement.

Connector missing  .......  C  ............  Require replacement.

Inoperative  .............  A  ........  (2) Require replacement.

Leaking (vacuum)  ........  A  ..  Require repair or replacement.

Linkage bent,

 affecting performance  ..  A  ...  Require repair or replacement

                                                      of linkage.

Linkage bent, not

 affecting performance  ..  2  ...  Suggest repair or replacement

                                                      of linkage.

Linkage binding,

 affecting performance  ..  A  ...  Require repair or replacement

                                                      of linkage.

Linkage binding, not

 affecting performance  ..  1  ..   Suggest repair or replacement

                                                      of linkage.

Linkage broken  ..........  A  ...  Require repair or replacement

                                                      of linkage.

Linkage loose, affecting

 performance  ............  A  ...  Require repair or replacement

                                                      of linkage.

Linkage loose, not

 affecting performance  ..  1  ...  Suggest repair or replacement

                                                      of linkage.

Linkage missing  .........  C  ............  Require replacement.

Linkage noisy  ...........  2  ..  Suggest repair or replacement.

Missing  .................  C  ............  Require replacement.

Noisy  ...................  2  ..  Suggest repair or replacement.

Out of adjustment  .......  A  ..  Require repair or replacement.

(1) - Determine cause and correct prior to repair or

      replacement of part.

(2) - Inoperative includes intermittent operation or out of

      OEM specification.

         AIR BAGS

         For all air bag components and conditions, refer to vehicle

manufacturer’s specifications for diagnosis and parts replacement.

         ALTERNATORS AND GENERATORS

NOTE:    If components have been added that increase vehicle

         electrical load requirement (for example, sound systems,

         air conditioning, alarm systems, etc.), charging system

         output must meet the increased demand.

ALTERNATOR AND GENERATOR INSPECTION

Condition                 Code                          Procedure

Alternator output meets

 OEM specification but is

 insufficient for add-on

 electrical load  ........  2  ...  Suggest upgrade of alternator

                                  or removal of excess electrical

                                                            load.

Alternator’s rated output

 is below OEM

 specification  ..........  B  ............  Require replacement.

Attaching hardware

 broken  .................  A  ...  Require repair or replacement

                                                     of hardware.

Attaching hardware

 missing  ................  C  ..........  Require replacement of

                                                        hardware.

Attaching hardware non-

 functioning  ............  A  ...  Require repair or replacement

                                                     of hardware.

Connector broken  ........  A  ..  Require repair or replacement.

Connector (Weatherpack

 type) leaking  ..........  A  ..  Require repair or replacement.

Connector melted  ........  A  ...........  ( 1) Require repair or

                                                     replacement.

Connector missing  .......  C  ............  Require replacement.

Diode inoperative  .......  A  ...........  ( 2) Require repair or

                                                     replacement.

Housing broken, affecting

 performance  ............  A  ..  Require repair or replacement.

Housing broken, not

 affecting performance  ..  ..  ........  No service suggested or

                                                        required.

Housing cracked, affecting

 performance  ............  A  ..  Require repair or replacement.

Housing cracked, not

 affecting performance  ..  1  ..  Suggest repair or replacement.

Inoperative  .............  A  ...........  ( 2) Require repair or

                                                     replacement.

Noisy  ...................  2  ..  Suggest repair or replacement.

Pulley incorrect  ........  B  ............  Require replacement.

Terminal broken  .........  A  ..  Require repair or replacement.

Terminal burned, affecting

 performance  ............  A  ...........  ( 1) Require repair or

                                                     replacement.

Terminal burned, not

 affecting performance  ..  2  ..  Suggest repair or replacement.

Terminal corroded,

 affecting performance  ..  A  ..  Require repair or replacement.

Terminal corroded, not

 affecting performance  ..  2  ..  Suggest repair or replacement.

Terminal loose, affecting

 performance  ............  B  ..  Require repair or replacement.

Terminal loose, not

 affecting performance  ..  1  ..  Suggest repair or replacement.

Terminal resistance

 (voltage drop) out of

 specification  ..........  A  ..  Require repair or replacement.

Threads damaged  .........  A  ..  Require repair or replacement.

Threads stripped (threads

 missing)  ...............  A  ............  Require replacement.

Voltage drop out of

 specification  ..........  A  ..  Require repair or replacement.

(1) - Determine cause and correct prior to repair or

      replacement of part.

(2) - Inoperative includes intermittent operation or out of OEM

      specification.

         AMPLIFIERS

         See

RECEIVERS, AMPLIFIERS, EQUALIZERS AND SUB-WOOFER VOLUME CONTROLS .

         ANTENNAS

ANTENNA INSPECTION

Condition                 Code                          Procedure

Attaching hardware

 broken  .................  A  ...  Require repair or replacement

                                                     of hardware.

Attaching hardware

 missing  ................  C  ..........  Require replacement of

                                                        hardware.

Attaching hardware not

 functioning  ............  A  ...  Require repair or replacement

                                                     of hardware.

Broken  ..................  A  ............  Require replacement.

Bent  ....................  2  ..  Suggest repair or replacement.

Binding  .................  2  ..  Suggest repair or replacement.

Connector broken  ........  A  ..  Require repair or replacement.

Connector melted  ........  A  ...........  ( 1) Require repair or

                                                     replacement.

Connector missing  .......  C  ............  Require replacement.

Inoperative  .............  A  ........  (2) Require replacement.

Insulation damaged,

 conductors exposed  .....  A  ..  Require repair or replacement.

Insulation damaged,

 conductors not exposed  .  1  ............  Suggest replacement.

Missing  .................  C  ............  Require replacement.

Motor runs continuously  .  A  .........  Require or replacement.

Power antenna noisy  .....  2  ..  Suggest repair or replacement.

Sticking  ................  2  ..  Suggest repair or replacement.

Terminal broken  .........  A  ..  Require repair or replacement.

Terminal burned, affecting

 performance  ............  A  ...........  ( 1) Require repair or

                                                     replacement.

Terminal burned, not

 affecting performance  ..  2  ..  Suggest repair or replacement.

Terminal corroded,

 affecting performance  ..  A  ..  Require repair or replacement.

Terminal corroded, not

 affecting performance  ..  2  ..  Suggest repair or replacement.

Terminal loose, affecting

 performance  ............  B  ..  Require repair or replacement.

Terminal loose, not

 affecting performance  ..  1  ..  Suggest repair or replacement.

(1) - Determine cause and correct prior to repair or

      replacement of part.

(2) - Inoperative includes intermittent operation or out of

      specification.

         BATTERIES

         Proper operation of any electrical system or component can be

affected by battery condition.  The battery(ies) must meet or exceed

minimum specification for vehicle as equipped and test to that

specific battery’s CCA.

         Definition of Terms

      *  Battery Performance Testing

         Testing that determines whether or not a battery meets both

         vehicle OEM and battery manufacturer’s specifications.

      *  Cold Cranking Amp (CCA) Rating

         The number of amperes a new, fully charged battery at

         0



 F (-17.8



 C) can deliver for 30 seconds and maintain at

         least a voltage of 1.2 volts per cell (7.2 volts for a

         12-volt battery).

      *  Cranking Amps (CA)

         The number of amperes a new, fully charged battery, typically

         at 32



 F (0



 C) can deliver for 30 seconds and maintain at

         least a voltage of 1.2 volts per cell (7.2 volts for a

         12-volt battery).

      *  OEM Cranking Amps

         The minimum CCA required by the original vehicle manufacturer

         for a specific vehicle.

BATTERY INSPECTION

Condition                 Code                          Procedure

Battery frozen  ..........  ..  .........  ( 1) Further inspection

                                                        required.

Case leaking  ............  A  ............  Require replacement.

Casing swollen  ..........  A  ..........  ( 2) Further inspection

                                                        required.

Circuit open internally  .  A  ............  Require replacement.

Electrolyte

 contamination  ..........  A  ........... ( 2) Further inspection

                                                        required.

Electrolyte

 discoloration  ..........  A  ..........  ( 2) Further inspection

                                                        required.

Fails to accept and hold

 charge  .................  A  ........  (3) Require replacement.

Fluid level low  .........  B  ..........  ( 4) Further inspection

                                                        required.

Out of performance

 specification for

 battery  ................  B  ........  (5) Require replacement.

Out of specification for

 application  ............  B  ........  (5) Require replacement.

Post (top or side) burned,

 affecting performance  ..  A  ...........  ( 6) Require repair or

                                                     replacement.

Post (top or side) burned,

 not affecting

 performance  ............  2  ...........  ( 6) Suggest repair or

                                                     replacement.

Post (top or side)

 corroded, affecting

 performance  ............  A  .................  Require repair.

Post (top or side)

 corroded, not affecting

 performance  ............  2  .................  Suggest repair.