Mitsubishi Galant (2004+). Manual - part 702

 

  Index      Mitsubishi     Mitsubishi Galant - service repair manual 2004 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  700  701  702  703   ..

 

 

Mitsubishi Galant (2004+). Manual - part 702

 

 

A/T FAULTY OPERATION PREVENTION MECHANISM DIAGNOSIS

TSB Revision

AUTOMATIC TRANSAXLE

23A-359

 INSPECTION PROCEDURE 3: Selector Lever can be Moved from "P" to "R" Position with Brake Pedal 
Depressed when Ignition Key is at "LOCK" (OFF) Position.

.

TECHNICAL DESCRIPTION (COMMENT)
Key interlock cable or lock cam may be defective.

.

TROUBLESHOOTING HINTS

• Malfunction of lock cam

• Malfunction of key interlock cable

DIAGNOSIS

STEP 1. Check the connection of lock cam and 
key interlock cable.

Q: Is the connection of lock cam and key interlock 

cable in good condition?

YES : 

Go to Step 2.

NO : 

Repair the connection of lock cam. When 
the brake pedal is depressed with the 
ignition key at the "LOCK" (OFF) position, 
check that the selector lever can not be 
moved from "P" position to "R" position.

STEP 2. Check the fit of the lock cam.

Q: Is the lock cam installed correctly?

YES : 

Go to Step 3.

NO : 

Install the lock cam correctly. Refer to 

P.23A-386

. When the brake pedal is 

depressed with the ignition key at the 
"LOCK" (OFF) position, check that the 
selector lever can not be moved from "P" 
position to "R" position.

STEP 3. Check the lock cam.

Q: Is the lock cam in good condition?

YES : 

Go to Step 4.

NO : 

Replace the lock cam. Refer to 

P.23A-386

When the brake pedal is depressed with the 
ignition key at the "LOCK" (OFF) position, 
check that the selector lever can not be 
moved from "P" position to "R" position.

STEP 4. Check the fit of the key interlock cable.

Q: Is the key interlock cable installed correctly?

YES : 

Go to Step 5.

NO : 

Install the key interlock cable correctly. 
Refer to 

P.23A-389

. When the brake pedal 

is depressed with the ignition key at the 
"LOCK" (OFF) position, check that the 
selector lever can not be moved from "P" 
position to "R" position.

STEP 5. Check the key interlock cable.

Q: Is the key interlock cable in good condition?

YES : 

No action to be taken.

NO : 

Replace the key interlock cable. Refer to 

P.23A-389

. When the brake pedal is 

depressed with the ignition key at the 
"LOCK" (OFF) position, check that the 
selector lever can not be moved from "P" 
position to "R" position.

A/T FAULTY OPERATION PREVENTION MECHANISM DIAGNOSIS

TSB Revision

AUTOMATIC TRANSAXLE

23A-360

INSPECTION PROCEDURE 4: Selector Lever cannot be Moved from "P" to "R" Position Smoothly.

.

TECHNICAL DESCRIPTION (COMMENT)
Key interlock cable, shift lock cable, transaxle control 
cable, lock cam, or selector lever assembly may be 
defective.

.

TROUBLESHOOTING HINTS

• Malfunction of key interlock cable

• Malfunction of shift lock cable

• Malfunction of transaxle control cable

• Malfunction of lock cam

• Malfunction of selector lever assembly

DIAGNOSIS

STEP 1. Check the connection of lock cam and 
key interlock cable.

Q: Is the connection of lock cam and key interlock 

cable in good condition?

YES : 

Go to Step 2.

NO : 

Repair the connection of lock cam and shift 
lock cable. Check that the selector lever can 
be moved from "P" position to "R" position 
smoothly.

STEP 2. Check the connection of selector lever 
assembly and transaxle control cable.

Q: Is the connection of selector lever assembly and 

transaxle control cable in good condition?

YES : 

Go to Step 3.

NO : 

Repair the connection of selector lever 
assembly and transaxle control cable. 
Check that the selector lever can be moved 
from "P" position to "R" position smoothly.

STEP 3. Check the fit of the lock cam.

Q: Is the lock cam installed correctly?

YES : 

Go to Step 4.

NO : 

Install the lock cam correctly. Refer to 

P.23A-386

. Check that the selector lever 

can be moved from "P" position to "R" 
position smoothly.

STEP 4. Check the lock cam.

Q: Is the lock cam in good condition?

YES : 

Go to Step 5.

NO : 

Replace the lock cam. Refer to 

P.23A-386

Check that the selector lever can be moved 
from "P" position to "R" position smoothly.

STEP 5. Check the fit of the shift lock cable.

Q: Is the shift lock cable installed correctly?

YES : 

Go to Step 6.

NO : 

Install the shift lock cable correctly. Refer to 

P.23A-389

. Check that the selector lever 

can be moved from "P" position to "R" 
position smoothly.

STEP 6. Check the shift lock cable.

Q: Is the shift lock cable in good condition?

YES : 

Go to Step 7.

NO : 

Replace the shift lock cable. Refer to 

P.23A-389

. Check that the selector lever 

can be moved from "P" position to "R" 
position smoothly.

STEP 7. Check the fit of the key interlock cable.

Q: Is the key interlock cable installed correctly?

YES : 

Go to Step 8.

NO : 

Install the key interlock cable correctly. 
Refer to 

P.23A-389

. Check that the selector 

lever can be moved from "P" position to "R" 
position smoothly.

STEP 8. Check the key interlock cable.

Q: Is the key interlock cable in good condition?

YES : 

Go to Step 9.

NO : 

Replace the key interlock cable. Refer to 

P.23A-389

. Check that the selector lever 

can be moved from "P" position to "R" 
position smoothly.

STEP 9. Check the fit of the transaxle control 
cable.

Q: Is the transaxle control cable installed correctly?

YES : 

Go to Step 10.

NO : 

Install the transaxle control cable correctly. 
Refer to 

P.23A-384

. Check that the selector 

lever can be moved from "P" position to "R" 
position smoothly.

A/T FAULTY OPERATION PREVENTION MECHANISM DIAGNOSIS

TSB Revision

AUTOMATIC TRANSAXLE

23A-361

STEP 10. Check the transaxle control cable.

Q: Is the transaxle control cable in good condition?

YES : 

Repair or replace the selector lever 

assembly. Refer to 

P.23A-384

 and 

P.23A-386

. Check that the selector lever 

can be moved from "P" position to "R" 
position smoothly.

NO : 

Replace the transaxle control cable. Refer 
to 

P.23A-384

. Check that the selector lever 

can be moved from "P" position to "R" 
position smoothly.

INSPECTION PROCEDURE 5: Selector Lever cannot be Moved from "R" to "P" Position.

.

TECHNICAL DESCRIPTION (COMMENT)
Selector lever assembly, transaxle control cable, or 
lock cam may be defective.

.

TROUBLESHOOTING HINTS

• Malfunction of selector lever assembly

• Malfunction of transaxle control cable

• Malfunction of lock cam

DIAGNOSIS

STEP 1. Check the connection of selector lever 
assembly and transaxle control cable.

Q: Is the connection of selector lever assembly and 

transaxle control cable in good condition?

YES : 

Go to Step 2.

NO : 

Repair the connection of selector lever 
assembly and transaxle control cable. 
Check that the selector lever can be moved 
from "R" position to "P" position.

STEP 2. Check the fit of the lock cam.

Q: Is the lock cam installed correctly?

YES : 

Go to Step 3.

NO : 

Install the lock cam correctly. Refer to 

P.23A-386

. Check that the selector lever 

can be moved from "R" position to "P" 
position.

STEP 3. Check the lock cam.

Q: Is the lock cam in good condition?

YES : 

Go to Step 4.

NO : 

Replace the lock cam. Refer to 

P.23A-386

Check that the selector lever can be moved 
from "R" position to "P" position.

STEP 4. Check the fit of the transaxle control 
cable.

Q: Is the transaxle control cable installed correctly?

YES : 

Go to Step 5.

NO : 

Install the transaxle control cable correctly. 
Refer to 

P.23A-384

. Check that the selector 

lever can be moved from "R" position to "P" 
position.

STEP 5. Check the transaxle control cable.

Q: Is the transaxle control cable in good condition?

YES : 

Repair or replace the selector lever 

assembly. Refer to 

P.23A-384

 and 

P.23A-386

. Check that the selector lever 

can be moved from "R" position to "P" 
position smoothly.

NO : 

Replace the transaxle control cable. Refer 
to 

P.23A-384

. Check that the selector lever 

can be moved from "R" position to "P" 
position.

A/T FAULTY OPERATION PREVENTION MECHANISM DIAGNOSIS

TSB Revision

AUTOMATIC TRANSAXLE

23A-362

INSPECTION PROCEDURE 6: Ignition Key cannot be Turned to the "LOCK" (OFF) Position when 
Selector Lever is at "P" Position.

.

TECHNICAL DESCRIPTION (COMMENT)
Lock cam, steering lock cylinder assembly, transaxle 
control cable, or key interlock cable may be defec-
tive.

.

TROUBLESHOOTING HINTS

• Malfunction of lock cam

• Malfunction of key interlock cable

• Malfunction of transaxle control cable

• Malfunction of steering lock cylinder assembly

DIAGNOSIS

STEP 1. Check the connection of lock cam and 
key interlock cable.

Q: Is the connection of lock cam and key interlock 

cable in good condition?

YES : 

Go to Step 2.

NO : 

Repair the connection of lock cam. Check 
that the ignition key can be turned to the 
"LOCK" (OFF) position with the selector 
lever at "P" position.

STEP 2. Check the fit of the lock cam.

Q: Is the lock cam installed correctly?

YES : 

Go to Step 3.

NO : 

Install the lock cam correctly. Refer to 

P.23A-386

. Check that the ignition key can 

be turned to the "LOCK" (OFF) position with 
the selector lever at "P" position.

STEP 3. Check the lock cam.

Q: Is the lock cam in good condition?

YES : 

Go to Step 4.

NO : 

Replace the lock cam. Refer to 

P.23A-386

Check that the ignition key can be turned to 
the "LOCK" (OFF) position with the selector 
lever at "P" position.

STEP 4. Check the fit of the key interlock cable.

Q: Is the key interlock cable installed correctly?

YES : 

Go to Step 5.

NO : 

Install the key interlock cable correctly. 
Refer to 

P.23A-389

. Check that the ignition 

key can be turned to the "LOCK" (OFF) 
position with the selector lever at "P" 
position.

STEP 5. Check the key interlock cable.

Q: Is the key interlock cable in good condition?

YES : 

Go to Step 6.

NO : 

Replace the key interlock cable. Refer to 

P.23A-389

. Check that the ignition key can 

be turned to the "LOCK" (OFF) position with 
the selector lever at "P" position.

STEP 6. Check the fit of the transaxle control 
cable.

Q: Is the transaxle control cable installed correctly?

YES : 

Replace the steering lock cylinder 

assembly. Refer to 

P.37A-29

 and 

P.37A-32

Check that the ignition key can not be 
turned to the "LOCK" (OFF) position with 
the selector lever at "P" position.

NO : 

Install the transaxle control cable correctly. 
Refer to 

P.23A-384

. Check that the ignition 

key can be turned to the "LOCK" (OFF) 
position with the selector lever at "P" 
position.

 

 

 

 

 

 

 

Content   ..  700  701  702  703   ..