Mitsubishi Galant (2004+). Manual - part 207
SWS DIAGNOSIS
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-19
ETACS
NOTE: For item No. 43, the scan tool MB991958
(MUT-III Sub Assembly) also displays "ON" when the
light reminder tone alarm or the seat belt tone alarm
function is triggered.
.
CHECK
ITEM
ITEM NO. DISPLAY ON
SCAN TOOL
CHECK CONDITION
NORMAL
CONDITION
Tone alarm
43
BUZZER
1. Ignition switch: LOCK (OFF)
2. Key reminder switch: ON
3. Front door switch: ON (front door open)
ON
When requirements for sounding each
warning tone alarm are not satisfied
OFF
Front fog
lights
36
F.FOG LIGHT
1. Lighting switch: HEAD
2. Fog light switch: ON
ON
Other than the condition above
OFF
Driver’s door
switch
32
FRONT DOOR
SW
Driver’s door switch and Front passenger’s
door switch is on
ON
Driver’s door switch and Front passenger’s
door switch is off
OFF
Headlight
automatic
shutoff
function
35
H/L AUTO-CUT 1. Lighting switch: Other than OFF
2. Ignition switch: from ON or START to
LOCK (OFF) or ACC
3. Front door switch: ON (front door open)
OFF to ON (after
approximately one
second)
When requirements for the headlight
automatic shutoff are not satisfied
OFF
Ignition
switch (ACC)
31
IG SW (ACC)
Ignition switch: ACC or ON
ON
Ignition switch: LOCK (OFF) or START
OFF
Ignition
switch (IG1)
30
IG SW (IG1)
Ignition switch: ON or START
ON
Ignition switch: LOCK (OFF) or ACC
OFF
Windshield
intermittent
wiper interval
37
INT WIPE
TIME
1. Ignition switch: ACC or ON
2. Operate the intermittent wiper control,
and change the wiper interval
The scan tool
MB991958
(MUT-III Sub
Assembly)
displays
intermittent wiper
interval in
response to the
intermittent wiper
control positions.