|
|
SPECIFICATIONS TSB Revision ENGINE OVERHAUL <3.8L ENGINE> 11D-62 GENERAL SPECIFICATIONS M1113000200553 Oil filter bracket bolt M10 41 ± 8 N⋅m (30 ± 6 ft-lb) Oil filter bracket cover bolt 11 ± 1 N⋅m (95 ± 9 in-lb) Oil pan, lower bolt 11 ± 1 N⋅m (95 ± 9 in-lb) Oil pan, upper bolt 9.0 ± 3.0 N⋅m (80 ± 26 in-lb) Oil pump case bolt 14 ± 1 N⋅m (122 ± 9 in-lb) Oil pump cover bolt 10 ± 2 N⋅m (87 ± 17 in-lb) Oil screen bolt 19 ± 3 N⋅m (14 ± 2 ft-lb) Relief plug 44 ± 5 N⋅m (33 ± 4 ft-lb) Piston and connecting rod 27 ± 2 N⋅m (20 ± 1 ft-lb) + 90° to 94° Crankshaft and cylinder block 74 ± 4 N⋅m (54 ± 3 ft-lb) Block heater bolt 2.6 ± 0.2 N⋅m (23 ± 1 in-lb) Flywheel or drive plate bolt 74 ± 1 N⋅m (54 ± 1 ft-lb) Knock sensor 23 ± 2 N⋅m (17 ± 1 ft-lb) Knock sensor bracket bolt 28 ± 2 N⋅m (22 ± 1 ft-lb) Oil seal case bolt 11 ± 1 N⋅m (95 ± 9 in-lb) Rear plate bolt 11 ± 1 N⋅m (95 ± 9 in-lb) ITEMS SPECIFICATIONS DESCRIPTIONS SPECIFICATIONS Type 60 ° V, OHV, SOHC Number of cylinders 6 Combustion chamber Pentroof type Total displacement cm 3 (cu in) 3,828 (233.6) Cylinder bore mm (in) 95.0 (3.74) Piston stroke mm (in) 90.0 (3.54) Compression ratio 10.0 Valve timing Intake valve Opens (BTDC) 7 ° Closes (ABDC) 61 ° Exhaust valve Opens (BBDC) 61 ° Closes (ATDC) 15 ° Lubrication system Pressure feed, full-flow filtration Oil pump type Trochoid type |