|
|
GDI – Troubleshooting 13A-79 OK Check all the following items: Spark plugs Compression pressure Foreign material (such as water or kerosine) entered the fuel OK Check ignition coil spark for each cylinder. Caution (4) Earth the spark plug electrode securely. NG Replace the ignition coil. No NG Check that the crank angle sensor and timing belt cover are proper- Check ignition timing. (Refer to GROUP 11A – Engine Adjustment.) OK Yes Clean around the throttle valve. (Refer to P.13A-96*.) Does the engine stall immediately after the accelerator pedal is OK MUT- II Data list 68 EGR valve (Refer to P.13A-99.) NG Check the EGR valve. (Refer to P.13A-52, INSPECTION PROCE- MUT- II Data list 34 Air flow sensor reset signal (Refer to P.13A-99.) NG Check the air flow sensor system. (Refer to P.13A-14, INSPEC- OK MUT- II Data list 31 Small lamp switch (Refer to P.13A-99.) NG Check the small lamp switch system. OK OK MUT- II Data list 28 A/C switch (Refer to P.13A-99.) NG Check the A/C switch and A/C relay system. OK MUT- II Data list 27 Power steering fluid pressure switch (Refer to P.13A-99.) NG Check the power steering fluid pressure switch system. From the previous page NOTE Refer to the ’99 SPACE STAR Workshop Manual (Pub. No. CMXE99E1) |