Mitsubishi Lancer (4A9 engine). Manual - part 174

MITSUBISHI MULTI COMMUNICATION SYSTEM (MMCS)

CHASSIS ELECTRICAL

54A-358

NOTE:

If there is "NG" or "N/A" as the check results,
select "NG Code" on the "Sensor Check" screen.
Then "NG code Indication" screen will show the
NG code.
NG CODE REFERENCE TABLE FOR SENSOR
CHECK

HANDS FREE MODULE <VEHICLES WITH
HANDS FREE ECU>

1. Select "Hands Free Module" on "Service" screen.

NOTE: For item "Hands Free Module", refer or
Hands Free ECU

−

Diagnosis Mode .)

USB BOX <VEHICLES WITH USB BOX>

1. Select "USB BOX" on "Service" screen.

NOTE: For item "USB BOX", refer or USB Box

−

Diagnosis Mode .)

HANDLE SETTING

1. Select "Handle Setting" on "Service" screen.

2. Select the currently-set handle to display.
3. To change the handle setting, select the handle to

be changed to, and then select "Set."
NOTE: Even when the handle is selected, the
selected handle will not be set if "Back" is
selected.

Sensor
classific
ation

NG
Code
No.

Error items

Gyro
sensor

Offset error while the vehicle is
stationary (lower limit error)

Offset error while the vehicle is
stationary (upper limit error)

Output error during driving

Speed
sensor

Output error while the vehicle is
stationary

Back

NG Code Indication

Gyro Sensor

AC606336

Service

Vehicle Signal Check

Monitor Check

Camera Setting

Speaker Check

Network/Connect Line Check

Versions Indication

1/2

Sensor Check

Hands Free Module

Memory Initialization

Back

Next

Previous

CAN Communication Confirmation

AC903640

Service

Vehicle Signal Check

Monitor Check

Camera Setting

Speaker Check

Network/Connect Line Check

Versions Indication

1/2

Sensor Check

USB BOX

Memory Initialization

Back

Next

Previous

CAN Communication Confirmation

AC904700

ACB01837

Service

Vehicle Signal Check

Monitor Check

Camera Setting

Speaker Check

Network/Connect Line Check

Car Type Setting

Versions Indication

1/2

Sensor Check

Hands Free Module/USB BOX

Handle Setting

Back

Next

Previous

AC7070627

Handle Setting

Back

Set

RHD

LHD

MITSUBISHI MULTI COMMUNICATION SYSTEM (MMCS)

CHASSIS ELECTRICAL

54A-359

CAN COMMUNICATION CONFIRMATION
<VEHICLES FOR RUSSIA>

1. Select "CAN Communication Confirmation" on

"Service" screen.

2. If "List Of Connection Equipment" is selected on

"CAN Communication Confirmation" screen, the
system will determine which equipment is
installed according to the connected equipment
reference table. Then the equipment which are
connected to the CAN box unit will be displayed.

CAN BOX UNIT-CONNECTED EQUIPMENT REF-
ERENCE TABLE

3. If "Version Indication" is selected on "CAN

Communication Confirmation" screen, the version
for each item is displayed.

4. If "CAN BOX Memory Data Indication" is selected

on "CAN Communication Confirmation" screen,
"CAN BOX Memory Data Indication" will be
displayed.

5. If any item is selected on "CAN BOX Memory

Data Indication" screen, its relevant information is
displayed.

•

Various Data

Screen indication

Equipment

HVAC

A/C-ECU

FCM

ETACS-ECU

Service

Vehicle Signal Check

Monitor Check

Camera Setting

Speaker Check

Network/Connect Line Check

Versions Indication

1/2

Sensor Check

Hands Free Module

Memory Initialization

Back

Next

Previous

CAN Communication Confirmation

AC903640

CAN Communication Confirmation

List Of Connection Equipment

Version Indication

CAN BOX Memory Data Indication

Back

AC606340

CAN List Of Connection Equipment

HVAC

CCN

WCM

FCM

ORC

Back

AC904730

ORC

SRS-ECU

CCN

Combination meter

WCM

Wireless control module

Screen indication

Equipment

Version Indication

Hardware : 1.2

CAN MATRIX : 05.25

NM : 43.24

DIAG : 00h

TPMC : 33.11

Software : 01.02.03

CAN DRIVER : 73.00

KWP2000 : 49.10

Back

DBKOM : 49.17

AC606342

CAN BOX Memory Data Indication

Various Data

Coding Data

VIN

Tell-Tale Stack

Chrono Stack

Back

AC606343

Various Data

Origin : 04h Supplier : 85h

System ID : 08h Variation ID : 10h

Serial ID : 0000h

ECU Part Number : 008750A90

ECU Serial Number : 01234567890123

Back

AC601530

MITSUBISHI MULTI COMMUNICATION SYSTEM (MMCS)

CHASSIS ELECTRICAL

54A-360

•

Coding Data

•

VIN

•

Tell-Tale Stack

•

Chrono Stack

MEMORY INITIALIZATION

1. Select "Memory Initialization" on "Service" screen.

2. If you select "Start" on "Memory Initialization"

screen, the settings such as registered locations
and music server will be erased (initialised) from
the memory.
NOTE: If the ignition switch is turned to "LOCK"
(OFF) position during the initialisation, the initiali-
sation will be suspended. If the ignition switch is
turned to "ACC" or "ON" position, the initialisation
will be resumed.

3. After the memory initialisation is complete, the

navigation system will restart automatically.

Coding Data

Coding Data : 4000h

Back

AC606345

VIN

current VIN

0123456 0123456 012

Original VIN

0123456 0123456 012

Back

AC606346

Tell-Tale Stack

Historical
DTC : C197h
Odometer : 0132h
Interrogation
DTC Read Counter : 04h
Odometer : 01a5h

Back

Next

Previ

2/8

AC606347

Chrono Stack

DTC Value : 0197h

DTC Status : A0h

Odometer Mileage : 1B27h

Accumulation Timer : 06C4h

IG Counter : 15h

Back

Next

Previ

2/8

AC606348

Service

Vehicle Signal Check

Monitor Check

Camera Setting

Speaker Check

Network/Connect Line Check

Versions Indication

1/2

Sensor Check

Hands Free Module

Memory Initialization

Back

Next

Previous

CAN Communication Confirmation

AC903640

Back

Start

Memory Initialization

You can erase all of the back up data.

After erasing the data, the system will reboot.

If you push Start, the data will be deleted.

AC606338

ln Early Period Of Memory

Please do not switch off until rebooting is completed.

AC606339

MITSUBISHI MULTI COMMUNICATION SYSTEM (MMCS)

CHASSIS ELECTRICAL

54A-361

TMC SENSITIVITY

1. Select "TMC sensitivity" on "Service" screen.

2. The information of TMC station is displayed.

NOTE: When the now-received information is
from selected TMC station, "TMC_station" is dis-
played on the upper right of the screen. "

−

" is dis-

played when the information is not received.

3. Select "TMC Search" on the "TMC information"

screen to search the TMC station that can be
received, and update and display the contents of
"Found station list".

4. Select "TMC station" displayed on the "Found

station list" and press "decision" switch to update
the received TMC station and return to the "TMC
information" screen. The information of selected
TMC station is displayed on the TMC information
screen.

5. Select "TMC Manual Search" on the "TMC

information" screen to set the frequency by "<" or
">" switch.

6. Update the received TMC station by "Set" switch

and return to the "TMC information" screen. The
information of selected TMC station is displayed
on the TMC information screen.

VERSIONS LOG INFORMATION
Displays logs for drive and HDD.

Service Data Log

1. Select "Versions Log Information" on "Service"

screen.

2. Select "Service Data Log" on the "Versions Log

Information" screen.

Service

TMC Sensitivity

Versions Log Information

Touch Switch Confirmation

2/2

Back

Next

Previous

AC903642

AC611547

AC611548

AC611549

Service

TMC Sensitivity

Versions Log Information

Touch Switch Confirmation

2/2

Back

Next

Previous

AC903642

AC611719

Service Data Log

Time Adjustment Log

Content .. 172 173 174 175 ..