|
|
DIAGNOSIS <TC-SST> TSB Revision TWIN CLUTCH- SPORTRONIC SHIFT TRANSMISSION (TC-SST) 22C-185 DTC P1835: Shift Fork Position Sensor 4 System (Poor performance) CAUTION • If there is any problem in the CAN bus lines, an incorrect diagnostic trouble code may be • Whenever the ECU is replaced, ensure that the CAN bus lines are normal. . DIAGNOSTIC FUNCTION TC-SST-ECU checks that the shift fork position sen- . DESCRIPTIONS OF MONITOR METHODS The shift fork position sensor 4 is determined to be . MONITOR EXECUTION • Continuous . MONITOR EXECUTION CONDITIONS Other Monitor (There is no temporary DTC stored in memory for the item monitored below) • P1831: Shift fork position sensor 4 system (Volt- age low range out) • P1832: Shift fork position sensor 4 system (Volt- age high range out) • P1833: Shift fork position sensor 4 system (Out- put range out) • P1834: Shift fork position sensor 4 system (Neu- tral) • P184B: Shift fork 4 malfunction ment • P1855: Shift fork 3 or 4 opposite direction move- ment • P1858: Even number gear axle interlock Sensor (The sensor below is determined to be normal) • Not applicable . |