|
|
ROCKER ARMS AND CAMSHAFT TSB Revision ENGINE OVERHAUL <2.4L ENGINE> 11B-29 2. Place the lash adjuster in container A and clean its outside surface. NOTE: Use a nylon brush if deposits are hard to remove. CAUTION The steel ball spring is extremely weak, so the lash [0.5 mm (0.020 inch) indiameter] or special tool MD998442, NOTE: If the plunger remains stiff or the mechanism 4. Remove the lash adjuster from the container. Then, push down the steel ball gently and push the plunger to eliminate CAUTION The steel ball spring is extremely weak, so the lash down the internal steel ball using wire [0.5 mm (0.020 inch) 6. Remove the lash adjuster from the container. Then, push down the steel ball gently and push the plunger to eliminate AKX00504 DIESEL AB AKX00506 DIESEL FUEL WIRE OR MD998442 AB AKX00507 WIRE OR MD998442 DIESEL FUEL AB AKX00507 WIRE OR MD998442 DIESEL FUEL AB |