Mitsubishi Colt Ralliart. Manual - part 433
ON-VEHICLE SERVICE
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-240
ON-VEHICLE SERVICE
CUSTOMISE FUNCTION
M1549002501444
Using M.U.T.-III adjusts the following function. The
programmed information is held even when the bat-
tery is disconnected.
• Vehicle speed-dependent wiper function
With the windshield wiper switch in the intermittent
position, the intermittent duration changes
depending on the intermittent adjusting knob
position and the vehicle speed.
• The selector "P" position-linked central door
unlocking function <CVT>
When the selector lever is shifted to the "P" position,
all the doors unlock.
• Turn-signal lamp operation sound function
Synchronized with the hazard lamp and the turn sig-
nal lamp, the buzzer sounds.
• Dimmer interior lamp control duration
When the door is closed with the ignition switch
LOCK (OFF), the interior lamp is turned OFF
automatically in the specified time.
• Timer lock time after executing the keyless entry
unlock
If any door including a tailgate is not opened after
being unlocked with the keyless transmitter,
doors are locked automatically within the speci-
fied time.
• Door-ajar warning function
Driving with any door, including a tailgate, not prop-
erly closed sounds the buzzer to let the driver
know the door-ajar state.
• Rear wiper intermittent duration
When the rear wiper switch is turned ON, the rear
wiper operates in the intermittent action. When
the rear wiper switch is turned from OFF to ON
two cycles, the rear wiper makes continuous
operation regardless of the intermittent operation
duration setting.
• Wiper linked with washer function
When this function is active, the windshield wiper
operates if the washer switch is turned ON.
• Hazard answer back function of the keyless entry
system
When lock/unlock is operated with the keyless entry
transmitter, the horn sounds so that the driver can
recognize the lock/unlock status of the vehicle
even if the driver is away from it.
• Initialising all functions (Returning to the initial
condition)
All adjusting functions are returned to the settings at
the time of factory shipment.
Item
No.
Items shown
on M.U.T.-III
screen
Item
Adjustment items
shown on M.U.T.-III
screen
Adjusting contents
4
SPEED SEN
WIP
Vehicle
speed-dependent
wiper function
W.FUNCTION
With function (Initial setting)
W/O FUNCTION
Without function
9
KEYLESS(HA
ZD)
Hazard answer
back function of
the keyless entry
system
LOCK/UNLOCK
With function for lock/unlock (the initial
condition)
LOCKED
With function only for lock
UNLOCKED
Without function only for unlock
W/O FUNCTION
Without function
14
P UNLOCK
ACT.
Door unlock
function linked
with "P" position
shift for centre
door lock system
W.FUNCTION
With function
W/O FUNCTION
Without function (the initial condition)
15
T/SIG.BUZZE
R
Turn-signal lamp
operation sound
function
W.FUNCTION
With function
W/O FUNCTION
Without function (the initial condition)
Main
Index
Group
TOC