Mitsubishi Grandis. Manual - part 5

 

  Index      Mitsubishi     Mitsubishi Grandis - service repair manual

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  3  4  5  6   ..

 

 

Mitsubishi Grandis. Manual - part 5

 

 

GENERAL INFORMATION

SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR

54B-17

ELECTRIC RETRACTABLE REMOTE 
CONTROLLED MIRROR
Electric retractable remote controlled 
mirror timer function

When the unfolding/folding switch on the remote 
controlled mirror switch is turned ON with the ignition 
switch at the ACC or ON position, the retraction 
mirror relay is turned on for 16 seconds 
(unfolding/folding) to unfold or fold the door mirrors. 
Even after the ignition switch is turned OFF, the door 
mirrors remain operable for 30 seconds.
If the unfolding/folding switch on the remote 
controlled mirror switch is turned ON while one of the 
retraction mirror relay is in operation (unfolding or 
folding), the other relay for the opposite motion is 
turned ON after 0.1 second.

NOTE: Whether the door mirrors are at the unfolding 
or folding position is determined according to the 
memory of the retraction mirror relay operated 
previously. For this reason, if the mirrors are 
manually retracted, they may not move when the 
unfolding/folding switch is pressed next time.

AUTOMATIC UNFOLDING FUNCTION

When the vehicle speed reaches 30 km/h, with the 
ignition switch ON and the mirrors retracted, 
ETACS-ECU turns on the retraction mirror relay 
(unfolding) for 16 seconds to return the door mirrors. 
However, the door mirrors do not return to their 
normal positions automatically if the ignition switch is 
turned from OFF to ON, and then the 
unfolding/folding switch on the remote controlled 

mirror switch is operated.
NOTE: Whether the door mirrors are at the unfolding 
or folding position is determined according to the 
memory of the retraction mirror relay operated 
previously. For this reason, if the mirrors are 
manually retracted, they may not move when the 
unfolding/folding switch is pressed next time.

AC309810

Ignition switch 
(ACC)

AB

t: 0.1 second
T1: 30 seconds
T2: 16 seconds

ON

OFF

T2

T2

T2

T2

T2

T2

t

t

t

T1

T1

OFF

ON

OFF

ON

Remote controlled
mirror switch

OFF

ON

Electric retractable remote 
controlled mirror 
(Unfolding)

Electric retractable remote 
controlled mirror 
(Folding)

AC207002AC

ON

OFF

ON

OFF

ON

OFF

ON

OFF

T : 16 seconds

T

T

Ignition switch 
                 (IG)

30 km/h

0 km/h

Unfolding

Folding

Vehicle speed

Remote controlled mirror switch
(folding/unfolding switch)

Door mirror position

Electric retractable remote 
controlled mirror (Folding)

Electric retractable remote 
controlled mirror (Unfolding)

GENERAL INFORMATION

SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR

54B-18

HEADLAMP
Headlamp automatic-shutdown function 
(the initial condition: with function)

Even when the lighting switch (tail lamp switch or 
headlamp switch) is ON, the headlamp (including the 
tail lamps) turns off automatically with any of the 
following conditions to prevent the battery discharge 
caused by unattended operation.

• If the ignition switch is turned OFF with the 

lighting switch ON, the lamp turns off 
automatically after 3 minutes. If the driver's door 
is opened during the 3 minutes, the lamp turns off 
after one second (One second before turning off, 
the lamp remainder buzzer sounds. However, if 
the driver's door is opened with the ignition key 
inserted, the key remainder alarm buzzer 
operates in the first priority). 

• When the lighting switch is turned to the 

headlamp position (the headlamp switch is ON) 
from OFF with the ignition switch OFF, the 
headlamps and the tail lamps turn off 3 minutes 
after getting off (open/close of the driver's door).

• If the lighting switch is turned to the tail lamp 

position from OFF with the ignition switch OFF, 
the lamps do not turn off automatically.

NOTE: The auto-turn off can be made by the 

customize function.

After the headlamp automatic-shutdown function, 
when the lighting switch is turned OFF and then ON 
or, the ignition switch is turned ON, the headlamp 
turns on again.

HIGH-BEAM INDICATOR

The ETACS-ECU outputs the high beam indicator 
ON signal to the combination meter through CAN 
communication in synchronization with the high 
beam headlamp operation. The combination meter 
receives the transmitted signal and turns ON or OFF 
the high beam indicator.

AC311847AB

1 second

3 minutes

3 minutes

(Closed) OFF

(Open) ON

ON

OFF

ON

OFF

Tail lamp

Headlamp

OFF

ON

OFF

Driver's 

door switch

Lighting switch

Headlamp output

Tail lamp output

Ignition switch (IG)

GENERAL INFORMATION

SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR

54B-19

Daytime running light function

The front-ECU illuminates the low-beam headlamps 
when the ignition switch is turned "ON" with the 
headlamp switch is at the "OFF" or "TAIL" position. It 
illuminates the low-beam headlamps at a normal 
brightness when the headlamps are turned on with 
the daytime running light on.

FLASHER TIMER FUNCTION
TURN-SIGNAL LAMP <INITIAL SETTING: 
TURN SIGNAL LAMP CAN BE OPERATED 
WHEN THE IGNITION SWITCH IS IN THE 
ON POSITION>

When the turn-signal lamp switch is ON (LH or RH) 
with the ignition switch is ON, the turn-signal lamp 
output (flash signal) is turned ON.
If the lamp bulb of the front or rear turn-signal lamp 
has burned out, the flashing speed becomes faster to 
alert the driver that the lamp bulb has burned out.
NOTE: Using a customize function, this function 
becomes available even when the ignition switch is 
in the ACC position. For more information about the 
customisation feature.

HAZARD WARNING LAMP

When the hazard lamp switch input signal turning 
from OFF to ON is detected, the flashing states turns 
over by the signal (When the hazard lamp is not 
blinking, it blinks. If it is blinking, it turns off).
NOTE: 

.

1. The push-return switch is adopted for the hazard 

lamp switch.

2. Even if the lamp bulb has burned out, the flashing 

speed of the hazard lamp is not changed.

TURN-SIGNAL LAMP INDICATOR

The ETACS-ECU outputs the turn-signal lamp 
indicator ON signal to the combination meter through 
CAN communication in synchronization with the 
turn-signal lamp operation. The combination meter 
receives the transmitted signal and turns ON or OFF 
the turn-signal lamp indicator.

AC311848 

Passing / Dimmer

switch

Headlamp switch

ON

OFF

HEAD

OFF or TAIL

Ignition switch

(IG2)

ON

OFF

Headlamp

High-beam

Low-beam

OFF

AB

AC101508

ON

OFF

ON

OFF

ON

OFF

ON

OFF

ON

OFF

Ignition 
switch (IG)

Turn signal lamp
switch RH

Turn signal lamp
switch LH

Turn signal lamp
output RH

Turn signal lamp
output LH

AC

AC101509

ON

OFF

ON

OFF

ON

OFF

Hazard lamp
switch

Turn signal 
lamp output 
RH

Turn signal 
lamp output 
LH

AC

GENERAL INFORMATION

SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR

54B-20

FOG LAMP
Front fog lamp control

When the fog lamp switch is turned to ON with the 
tail lamp or the headlamp lit (the tail lamp switch or 
the headlamp switch is ON), the fog lamp relay turns 
ON, and the fog lamps turn on.
If the tail lamp or the headlamp is turned off with the 
lighting switch OFF while the fog lamps lit, the fog 
lamps turn off the same time to prevent unattended 
operation.
If the tail lamp is turned off by the headlamp 
automatic-shutdown function, the fog lamps turn off 
at the same time. However, if the tail lamps turn on 
again, the fog lamps do not.

FRONT FOG LAMP INDICATOR

The ETACS-ECU outputs the front fog lamp indicator 
ON signal to the combination meter through CAN 
communication in synchronization with the front fog 
lamp operation. The combination meter receives the 
transmitted signal and turns ON or OFF the front fog 
lamp indicator.

Rear fog lamp control

If the rear fog lamp switch is turned ON when the 
headlamp or the front fog lamp is turned ON, the rear 
fog lamp is switched ON and OFF alternatively.
If the headlamp and the front fog lamp are turned 
OFF, the rear fog lamp is turned OFF at the same 
time.

REAR FOG LAMP INDICATOR

The ETACS-ECU outputs the rear fog lamp indicator 
ON signal to the combination meter through CAN 
communication in synchronization with the rear fog 
lamp operation. The combination meter receives the 
transmitted signal and turns ON or OFF the fog lamp 
indicator.

AC212278 AF

OFF

ON

(Illuminated) OFF

(Switched off) ON

Tail lamp

Headlamp

OFF

Front fog lamp switch

Lighting switch

Headlamp automatic shutdown 
output

(Extinguished) OFF

(Illuminated) ON

Fog lamp output

AC212279

ON

OFF

ON

OFF

Rear fog lamp switch

Rear fog lamps

AB

Tail lamp

Headlamp

OFF

Lighting switch

Extinguished

Illuminated

Front fog lamps

 

 

 

 

 

 

 

Content   ..  3  4  5  6   ..