Mazda 6 (2021 year). Manual in english - page 4

 

  Index      Manuals     Mazda 6 (2021 year). Manual in english

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

 

 

 

Content      ..     2      3      4      5     ..

 

 

 

Mazda 6 (2021 year). Manual in english - page 4

 

 

Before Driving
Doors and Locks
Locking, Unlocking with Auxiliary
Locking, Unlocking with Request
Key
Switch, Door Handle (With the
advanced keyless function)
Turn the auxiliary key toward the front to
lock, toward the back to unlock.
All doors can be locked/unlocked by
pressing the request switch on the front
To lock
doors while the key is being carried.
All doors lock automatically when the
Front doors
driver's door is locked using the auxiliary
key.
To unlock
The driver’s door unlocks when the
Request switch
auxiliary key is turned briefly to the
unlock position and then immediately
returned to the center position.
All doors unlock when the driver's door is
unlocked and the auxiliary key is held in
To lock
the unlock position for one second or
To lock the doors , press the request
longer.
switch and the hazard warning lights will
flash once.
A beep sound will be heard once.
To unlock
Lock
Unlock
Driver's door request switch
To unlock the driver's door, press the
request switch. A beep sound will be heard
twice and the hazard warning lights will
flash twice.
To unlock all doors, press the request
switch again within 3 seconds and two
more beep sounds will be heard.
3-14
Before Driving
Doors and Locks
Front passenger door request switch
(Walk-away auto lock function)
A beep sound is heard when all doors
To unlock all doors, press the request
are closed while the advanced key is
switch. A beep sound will be heard twice
being carried. All doors are locked
and the hazard warning lights will flash
automatically after about 3 seconds
twice.
when the advanced key is out of the
NOTE
operational range. Also, the hazard
warning lights flash once. (Even if the
The system can be set to unlock all
driver is in the operational range, all
doors by performing a single operation.
doors are locked automatically after
Refer to the Settings section in the
about 30 seconds.) If you are out of the
Mazda Connect Owner's Manual.
operational range before the doors and
Confirm that all doors are securely
the trunk lid are completely closed or
locked.
another key is left in the vehicle, the
For the trunk lid, move it without
walk-away auto lock function will not
pressing the electric trunk lid opener to
work. Always make sure that all doors
verify that the trunk lid has not been left
and the trunk lid are closed and locked
ajar.
before leaving the vehicle. The
All doors cannot be locked when any
walk-away auto lock function does not
door is open.
close the power windows.
It may require a few seconds for the
(Auto re-lock function)
doors to unlock after the request switch
After unlocking with the request switch,
is pressed.
all doors will automatically lock if any
A beep sound is heard for confirmation
of the following operations are not
when the doors are locked/unlocked
performed within about 30 seconds. If
using the request switch. If you prefer,
your vehicle has a theft-deterrent
the beep sound can be turned off.
system, the hazard warning lights will
The volume of the beep sound can also
flash for confirmation.
be changed.
The time required for the doors to lock
Refer to the Settings section in the
automatically can be changed.
Mazda Connect Owner's Manual.
Refer to the Settings section in the
The hazard warning lights flash when
Mazda Connect Owner's Manual.
the theft-deterrent system is armed or
turned off.
Opening a door or the trunk lid.
Refer to Theft-Deterrent System on page
Switching the ignition to any position
3-42.
other than off.
The setting can be changed so that the
doors are locked automatically without
pressing the request switch.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
3-15
Before Driving
Doors and Locks
Locking, Unlocking with
NOTE
Transmitter
When locking the doors this way, be
careful not to leave the key inside the
All doors can be locked/unlocked by
vehicle.
operating the keyless entry system
transmitter, refer to Keyless Entry System
Auto Lock/Unlock Function
(page 3-4).
Locking, Unlocking with Door-Lock
WARNING
Switch
Do not pull the inner handle on a front
All doors lock automatically when the
door:
lock side is pressed. They unlock when the
Pulling the inner handle on a front door
unlock side is pressed.
while the vehicle is moving is dangerous.
Driver's door
Passengers can fall out of the vehicle if the
Lock
door opens accidentally , which could
result in death or serious injury.
Unlock
When the vehicle speed exceeds 20
km/h (12 mph), all the doors lock
automatically.
When the ignition is switched off, all the
doors unlock automatically.
The auto lock/unlock function settings can
be changed.
Refer to the Settings section in the Mazda
Front passenger's door
Connect Owner's Manual.
Lock
Unlock
Locking, Unlocking with Door-Lock
Knob
Operation from inside
To lock any door from the inside, press the
door-lock knob.
To unlock, pull it outward.
To lock all the doors from an open front
door, press the lock side of the door lock
switch and then close the door.
3-16
Before Driving
Doors and Locks
This does not operate the other door locks.
NOTE
When locking the door this way:
Unlocked: Red indicator
Be careful not to leave the key inside the
vehicle.
Lock
The doors cannot be locked using the
driver's door lock knob if any door is
open when the ignition is switched to
ACC or ON.
Unlock
Rear Door Child Safety Locks
Operation from outside
These locks are intended to help prevent
children from accidentally opening the
To lock any door using its door-lock knob
rear doors. Use them on both rear doors
from the outside, press the door-lock knob
whenever a child rides in the rear seat of
to the lock position and close the door
the vehicle.
(holding the door handle in the open
position is not required).
If you slide the child safety lock to the
This does not operate the other door locks.
lock position before closing that door, the
door cannot be opened from the inside.
Door-lock knob
The door can only be opened by pulling
the outside handle.
Unlock
Lock
3-17
Before Driving
Doors and Locks
¾ When loading or unloading luggage in
Trunk Lid
the trunk, turn off the engine. Otherwise,
you could get burned by the heat of the
WARNING
exhaust gas.
Opening and Closing the Trunk Lid
Never allow a person to ride in the trunk:
Allowing a person to ride in the trunk is
Opening the trunk lid
dangerous. The person in the trunk could
Using the remote release button
be seriously injured or killed during sudden
braking or a collision.
Push the remote release button.
Do not drive with the trunk lid open:
Exhaust gas in the cabin of a vehicle is
dangerous. An open trunk lid in a moving
vehicle will cause exhaust gas to be drawn
into the cabin. This gas contains CO
(carbon monoxide), which is colorless,
odorless, and highly poisonous, and it can
cause loss of consciousness and death.
Moreover, an open trunk lid could cause
occupants to fall out in an accident.
Using the electric trunk lid opener
CAUTION
(With the advanced keyless function)
¾ Before opening the trunk lid, remove any
A locked trunk lid can also be opened
snow and ice accumulation on it.
while the key is being carried.
Otherwise, the trunk lid could close
Press the electric trunk lid opener on the
under the weight of the snow and ice
trunk lid, then raise the trunk lid when the
resulting in injury.
latch releases.
¾ Be careful when opening/closing the
trunk lid during strong winds. If a strong
gust blows against the trunk lid, it could
close suddenly resulting in injury.
¾ Fully open the trunk lid and make sure
that it stays open. If the trunk lid is only
Electric trunk lid
opened partially, it could slam shut by
opener
vibration or wind gusts resulting in
injury.
3-18
Before Driving
Doors and Locks
NOTE
Closing the trunk lid
When opening the trunk lid with the
To close, lower the trunk lid slowly using
doors locked, it may require a few
the trunk lid grip recess, and then push the
seconds for the trunk lid latch to release
trunk lid closed using both hands.
after the electric trunk lid opener is
Do not slam it. Pull up on the trunk lid to
pressed.
make sure it is secure.
The trunk lid can be closed when the
doors are locked with the key left in the
Trunk lid grip recess
vehicle. However, to prevent locking the
key in the vehicle, the trunk lid can be
opened by pressing the electric trunk lid
opener. If the trunk lid cannot be opened
despite doing this procedure, press the
electric trunk lid opener to fully open
the trunk lid after pushing the trunk lid
completely closed.
If the vehicle battery is dead or there is
a malfunction in the electrical system
and the trunk lid cannot be unlocked,
the trunk lid can be opened by
performing the emergency procedure.
Refer to When Trunk Lid Cannot be
Opened on page 7-50.
3-19
Before Driving
Doors and Locks
Always keep the car from being a tempting
Inside Trunk Release
place to play by latching the rear seats,
Lever*
doors and the trunk, and keeping the keys
where children can not play with them:
Your vehicle is equipped with an inside
Leaving children or animals unattended in
trunk release lever that provides a means
a parked vehicle is dangerous. Babies left
of escape for children and adults in the
sleeping and children who lock themselves
event they become locked inside the trunk.
in cars or trunks can die very quickly from
heat prostration. Do not leave your
No matter how careful adults might be
children or pets alone in a car at any time.
with keys and locking their cars, parents
Do not leave the car, the rear folding seats
should be aware that children may be
or the trunk unlocked.
tempted to play around vehicles and use
the trunk as a hiding place.
Opening the Trunk Lid from the
Inside
Adults are advised to familiarize
Slide the inside trunk release lever in the
themselves with the operation and location
direction of the arrow. The lever is made
of the inside trunk release lever so that all
of material that will glow for hours in the
children can be told about it in an
darkness of the trunk following a brief
appropriate way, keeping in mind that
exposure to ambient light.
most vehicles do not have such levers.
The inside trunk release lever is located on
WARNING
the inside of the trunk lid.
Close the trunk lid, be sure the seat backs
are latched and do not allow children to
play inside the vehicle:
Leaving the trunk lid open or leaving
children in the vehicle with the keys is
dangerous. Children could open the trunk
lid and climb inside resulting in possible
injury or death from heat exposure.
3-20
*Some models.
Before Driving
Fuel and Emission
Fuel and Engine Exhaust Precautions
Fuel Requirements (SKYACTIV-G 2.5, SKYACTIV-G 2.5T)
Vehicles with catalytic converters or oxygen sensors must use ONLY UNLEADED FUEL,
which will reduce exhaust emissions and keep spark plug fouling to a minimum.
To achieve maximum engine performance, use the specified fuel.
Fuel
Octane Rating*1 (Anti-knock index)
Regular unleaded fuel
87 [(R+M)/2 method] or above (91 RON or above)
*1
U.S. federal law requires that octane ratings be posted on gas station pumps.
Fuel with a rating lower than 87 octane (91 RON) will negatively affect the emission control
system performance and could also cause engine knocking and serious engine damage.
CAUTION
¾ USE ONLY UNLEADED FUEL.
Leaded fuel is harmful to the catalytic converter and oxygen sensors and will lead to
deterioration of the emission control system and or failures.
¾ This vehicle can only use oxygenated fuels containing no more than 10 % ethanol by
volume. Damage to the vehicle may occur when ethanol exceeds this recommendation, or
if the gasoline contains any methanol. Stop using gasohol of any kind if your vehicle engine
is performing poorly.
¾ Never add fuel system additives other than a Mazda genuine product, otherwise the
emission control system could be damaged. Consult an Authorized Mazda Dealer for
details.
Gasoline blended with oxygenates such as alcohol or ether compounds are generally
referred to as oxygenated fuels. The common gasoline blend that can be used with your
vehicle is ethanol blended at no more than 10 %. Gasoline containing alcohol, such as
ethanol or methanol, may be marketed under the name "Gasohol".
Vehicle damage and drivability problems resulting from the use of the following may not be
covered by the warranty.
Gasohol containing more than 10 % ethanol.
Gasoline or gasohol containing methanol.
Leaded fuel or leaded gasohol.
3-21
Before Driving
Fuel and Emission
Fuel Requirements (SKYACTIV-D 2.2)
The vehicle will operate efficiently on diesel fuel with specification Ultra-Low Sulfur Diesel
(ULSD, 15 ppm sulfur or less) fuel that meets the ASTM D975 standard or the equivalent.
Fuel grade labels are visible on fuel-filler lid, therefore, verify the fuel grade before
refueling. If the fuel grade cannot be verified, ask the gas station attendant.
CAUTION
¾ Never use fuel other than specification Ultra-Low Sulfur Diesel (ULSD, 15 ppm sulfur or less)
fuel that meets the ASTM D975 standard or the equivalent for your vehicle. Use of gasoline
or kerosene in diesel engines will result in fuel system and engine damage.
¾ Never use diesel fuel with concentrations of methyl ester bio-diesel higher than 5 % (B5),
such as B20 or B100.
¾ Never add fuel system additives other than a Mazda genuine product, otherwise the
emission control system could be damaged. Consult an Authorized Mazda Dealer for
details.
¾ If any type of incorrect fuel is accidently pumped into the fuel tank, do not turn on the
engine and drive the vehicle. Consult an Authorized Mazda Dealer for assistance.
Turning on the engine or driving the vehicle with the incorrect fuel could cause damage to
the fuel pump and fuel injectors.
NOTE
Fuel for winter driving is available. Ask the gas station attendant for details.
When refueling, always add at least 10 L (2.6 US gal, 2.2 Imp gal) of fuel.
Low outside temperatures
When the outside temperature is low, diesel fuel (light oil) may freeze and clog the fuel
pipe, leading to problems such as the engine not starting. When driving to a cold region, add
winter grade diesel fuel as soon as possible.
WARNING
Never use engine starting assist additives:
Using engine starting assist additives is dangerous because they may cause a vehicle
explosion or a vehicle runaway condition, leading to serious injury or death.
3-22
Before Driving
Fuel and Emission
Emission Control System (SKYACTIV-G 2.5, SKYACTIV-G 2.5T)
This vehicle is equipped with an emission control system (the catalytic converter is part of
this system) that enables the vehicle to comply with existing exhaust emissions
requirements.
WARNING
Never park over or near anything flammable:
Parking over or near anything flammable, such as dry grass, is dangerous. Even with the
engine turned off, the exhaust system remains very hot after normal use and could ignite
anything flammable. A resulting fire could cause serious injury or death.
CAUTION
Ignoring the following precautions could cause lead to accumulate on the catalyst inside the
converter or cause the converter to get very hot. Either condition will damage the converter
and cause poor performance.
¾ USE ONLY UNLEADED FUEL.
¾ Do not drive your Mazda with any sign of engine malfunction.
¾ Do not coast with the ignition switched off.
¾ Do not descend steep grades in gear with the ignition switched off.
¾ Do not operate the engine at high idle for more than 2 minutes.
¾ Do not tamper with the emission control system. All inspections and adjustments must be
made by a qualified technician.
¾ Do not push-start or pull-start this vehicle.
NOTE
Under U.S. federal law, any modification to the original-equipment emission control
system before the first sale and registration of a vehicle is subject to penalties. In some
states, such modification made on a used vehicle is also subject to penalties.
While the engine is off, the sound of a valve opening and closing can be heard at the rear
of the vehicle, however this does not indicate an abnormality. The vehicle has a
self-checking device and it operates while the engine is off.
3-23
Before Driving
Fuel and Emission
Emission Control System (SKYACTIV-D 2.2)
This vehicle is equipped with an emission control system (the catalytic converter and the
Selective Catalytic Reduction (SCR) system*1 are part of this system) that enables the
vehicle to comply with existing exhaust emissions requirements.
*1
SCR system is designed to reduce nitrogen oxide (NOx) in the exhaust gas and purify
the exhaust gas by injecting it with Diesel Exhaust Fluid (DEF). For more details, refer
to the Selective Catalytic Reduction (SCR) System (page 4-237).
About the catalytic converter
WARNING
Never park over or near anything flammable:
Parking over or near anything flammable, such as dry grass, is dangerous. Even with the
engine turned off, the exhaust system remains very hot after normal use and could ignite
anything flammable. A resulting fire could cause serious injury or death.
CAUTION
Ignoring the following precautions could cause lead to accumulate on the catalyst inside the
converter or cause the converter to get very hot. Either condition will damage the converter
and cause poor performance.
¾ Do not drive your Mazda with any sign of engine malfunction.
¾ Do not coast with the ignition switched off.
¾ Do not descend steep grades in gear with the ignition switched off.
¾ Do not operate the engine at high idle for more than 2 minutes.
¾ Do not tamper with the emission control system. All inspections and adjustments must be
made by a qualified technician.
¾ Do not push-start or pull-start this vehicle.
3-24
Before Driving
Fuel and Emission
About the SCR system
WARNING
Be careful not to allow the DEF to run out. If the DEF completely runs out, the SCR system will
not operate normally:
If the vehicle runs out of DEF, the vehicle speed is restricted in steps to prevent contaminants
from being exhausted. When the remaining distance-to-empty reaches 0 km (0 miles) in the
final stage, the engine is forced to idle. For replenishment of the DEF supply, consult an
Authorized Mazda Dealer.
CAUTION
Use a Mazda genuine product or a product conforming to ISO22241-1 for DEF. If
incompatible DEF is used, the SCR system may not operate normally. For the recommended
DEF, consult the nearest Authorized Mazda Dealer.
NOTE
When the remaining distance-to-empty is 640 km (400 miles) or shorter while the DEF
warning indication is displayed, the SCR warning light turns on and the vehicle speed is
restricted. In addition, if there is a problem with the SCR system/DEF and the remaining
distance-to-empty is 200 km (125 miles) or shorter, the SCR warning light flashes and the
vehicle speed is restricted.
DEF needs to be replenished periodically according to the scheduled maintenance
information. If a warning message is displayed in the multi-information display or the
SCR warning light flashes, consult an Authorized Mazda Dealer.
Normally, the vehicle can be driven about 12,000 km (7,500 miles) before the DEF needs
to be replenished.
3-25
Before Driving
Fuel and Emission
Engine Exhaust (Carbon monoxide)
WARNING
Do not drive your vehicle if you smell exhaust gas inside the vehicle:
Engine exhaust gas is dangerous. This gas contains carbon monoxide (CO), which is colorless,
odorless, and poisonous. When inhaled, it can cause loss of consciousness and death. If you
smell exhaust gas inside the vehicle, keep all windows fully open and contact an Authorized
Mazda Dealer immediately.
Do not run the engine when inside an enclosed area:
Running the engine inside an enclosed area, such as a garage, is dangerous. Exhaust gas,
which contains poisonous carbon monoxide, could easily enter the cabin. Loss of
consciousness or even death could occur.
Open the windows or adjust the heating or cooling system to draw fresh air when idling the
engine:
Exhaust gas is dangerous. When the vehicle is stopped with the windows closed and the
engine running for a long time even in an open area, exhaust gas, which contains poisonous
carbon monoxide, could enter the cabin. Loss of consciousness or even death could occur.
Clear snow from underneath and around your vehicle, particularly the tail pipe, before
starting the engine:
Running the engine when a vehicle is stopped in deep snow is dangerous. The exhaust pipe
could be blocked by the snow, allowing exhaust gas to enter the cabin. Because exhaust gas
contains poisonous carbon monoxide, it could cause loss of consciousness or even death to
occupants in the cabin.
3-26
Before Driving
Fuel and Emission
Fuel-Filler Lid and Cap
CAUTION
Always use only a genuine Mazda fuel-filler
WARNING
cap or an approved equivalent, available
at an Authorized Mazda Dealer. The wrong
When removing the fuel-filler cap, loosen
cap can result in a serious malfunction of
the cap slightly and wait for any hissing to
the fuel and emission control systems.
stop, then remove it:
(SKYACTIV-G 2.5 and SKYACTIV-G 2.5T for
Fuel spray is dangerous. Fuel can burn skin
U.S.A. and Canada)
and eyes and cause illness if ingested. Fuel
It may also cause the check engine light in
spray is released when there is pressure in
the instrument cluster to illuminate.
the fuel tank and the fuel-filler cap is
Refueling
removed too quickly.
Before refueling, close all the doors,
Before refueling, stop the engine, and
windows, and the trunk lid, and switch the
always keep sparks and flames away from
ignition OFF.
the filler neck:
1. To open the fuel-filler lid, pull the
Fuel vapor is dangerous. It could be ignited
remote fuel-filler lid release.
by sparks or flames causing serious burns
and injuries.
Additionally, use of the incorrect fuel-filler
cap or not using a fuel-filler cap may result
in a fuel leak, which could result in serious
burns or death in an accident.
Do not continue refueling after the fuel
pump nozzle shuts off automatically:
Continuing to add fuel after the fuel pump
nozzle has shut off automatically is
Remote fuel-filler
dangerous because overfilling the fuel tank
lid release
may cause fuel overflow or leakage. Fuel
2. To remove the fuel-filler cap, turn it
overflow and leakage could damage the
counterclockwise.
vehicle and if the fuel ignites it could cause
a fire and explosion resulting in serious
injury or death.
3-27
Before Driving
Fuel and Emission
3.
Attach the removed cap to the inner
CAUTION
side of the fuel-filler lid.
(SKYACTIV-G 2.5 and SKYACTIV-G 2.5T for
Fuel-filler lid
U.S.A. and Canada)
If the check fuel cap warning light
illuminates, the fuel-filler cap may not be
properly installed. If the warning light
illuminates, park your vehicle safely off the
right-of-way, remove the fuel-filler cap and
reinstall it correctly. After the cap has been
Fuel-filler cap
correctly installed, the fuel cap warning
light may continue to illuminate until a
4.
Insert the refueling nozzle all the way
number of driving cycles have been
and begin refueling. Pull out the
completed. A drive cycle consists of starting
refueling nozzle after the refueling
the engine (after four or more hours with
stops automatically.
the engine off) and driving the vehicle on
5.
To close the fuel-filler cap, turn it
city and highway roads.
clockwise until a click is heard.
Continuing to drive with the check fuel cap
6.
To close, press the fuel-filler lid until it
warning light illuminated could cause the
locks securely.
check engine light to illuminate as well.
3-28
Before Driving
Mirrors
2. Press the mirror switch in the
Mirrors
appropriate direction.
Before driving, adjust the inside and
Center position
outside mirrors.
Outside Mirrors
WARNING
Be sure to look over your shoulder before
changing lanes:
Changing lanes without taking into
Mirror switch
account the actual distance of the vehicle
After adjusting the mirror, lock the control
in the convex mirror is dangerous. You
by rotating the switch in the center
could have a serious accident. What you
position.
see in the convex mirror is closer than it
appears.
Folding outside mirror
Mirror type
WARNING
Flat type (driver's side)
Flat surface mirror.
Convex type (front passenger side)
Always return the outside mirrors to the
The mirror has single curvature on its
driving position before you start driving:
surface.
Driving with the outside mirrors folded in is
dangerous. Your rear view will be
Power mirror adjustment
restricted, and you could have an accident.
The ignition must be switched to ACC or
Manual folding outside mirror
ON position.
Fold the outside mirror rearward until it is
To adjust:
flush with the vehicle.
1. Rotate the mirror switch to the left or
right to choose the left or right side
mirror.
3-29
Before Driving
Mirrors
Power folding outside mirror
To return the mirror to the driving
position, rotate the switch to the center
position.
WARNING
Center position
Do not touch a power folding outside
mirror while it is moving:
Touching the power folding outside mirror
when it is moving is dangerous. Your hand
could be pinched and injured or the mirror
could be damaged.
Fold-in position
Use the outside mirror switch to set the
mirror to the on-road position:
Setting the power folding outside mirror to
the on-road position by hand is dangerous.
Automatic folding function*
The mirror will not lock in position and will
The automatic folding function operates
prevent effective rearview visibility.
when the ignition is switched to OFF.
When the outside mirror switch is in a
Only operate the power folding outside
position other than the fold-in position, the
mirror with the vehicle safely parked:
outside mirrors automatically fold in and
Operating the power folding outside mirror
out when the doors are locked and
while the vehicle is moving is dangerous.
unlocked.
Wind blast on the mirror will cause them to
Also, when the ignition is switched ON or
collapse and you will be unable to return it
the engine is started, the outside mirrors
to the on-road position, preventing
fold out automatically.
rearview visibility.
NOTE
The ignition must be switched to ACC or
The outside mirrors may not fold in and
ON position.
out automatically under cold weather
To fold, rotate the outside mirror switch.
conditions.
If the outside mirrors do not fold in and
out automatically, remove any ice or snow,
and then operate the outside mirror switch
to fold the outside mirrors in or out.
Canceling the automatic folding
function
To cancel the automatic folding function,
carry out the following procedure using
the master control switches.
1. Switch the ignition ON.
3-30
*Some models.
Before Driving
Mirrors
2. If the power window lock switch is in
Driver's side auto-dimming door
the unlock position, switch it to the
mirror*
lock position.
The movement of the auto-dimming door
3. Press and hold the front passenger's
mirror is interlocked with the
power window switch and rear left/
auto-dimming rearview mirror in the
right power window switches on the
interior to automatically reduce glare from
driver's door at the same time for 3
rear on-coming vehicles.
seconds or longer.
Refer to Rearview Mirror on page 3-31.
NOTE
NOTE
The automatic folding function cannot
The front passenger-side door mirror does
be canceled if the procedure is not
not have the auto-dimming feature.
completed within the specified times, or
Rearview Mirror
the procedure is changed along the way.
To redo the procedure, first switch the
ignition off and proceed from the
WARNING
beginning.
If you are unable to cancel the function
Do not stack cargo or objects higher than
despite doing the cancellation
the seatbacks:
procedure, consult an Authorized Mazda
Cargo stacked higher than the seatbacks is
Dealer.
dangerous. It can block your view in the
rearview mirror, which might cause you to
Restoring the automatic folding
hit another car when changing lanes.
function
Rearview mirror adjustment
With the automatic folding function in the
canceled state, repeat the previous
Before driving, adjust the rearview mirror
procedure for canceling the function and it
to center on the scene through the rear
will be restored.
window.
NOTE
If you are unable to restore the function
despite carrying out the restore procedure,
consult an Authorized Mazda Dealer.
Engine-off outside mirror operation*
The outside mirrors can be operated for
about 40 seconds after the ignition is
switched from ON to off.
NOTE
For the manual day/night mirror, perform
the adjustment with the day/night lever in
the day position.
*Some models.
3-31
Before Driving
Mirrors
Reducing glare from headlights
To reactivate the auto-dimming function,
press the ON/OFF button (
). The
Manual day/night mirror
indicator light will illuminate.
Push the day/night lever forward for day
driving. Pull it back to reduce glare of
headlights from vehicles at the rear.
Indicator light
Day/Night lever
ON/OFF button
Night
Day
NOTE
Auto-dimming mirror
Do not use glass cleaner or suspend
The auto-dimming mirror automatically
objects on or around the light sensor.
reduces the glare of headlights from
Otherwise, light sensor sensitivity will
vehicles at the rear when the ignition is
be affected and may not operate
switched ON.
normally.
(With Homelink wireless control
(With Homelink wireless control
system)
system)
(Type A)
(Type A)
Press the OFF button (
) to cancel the
auto-dimming function. The indicator light
will turn off.
To reactivate the auto-dimming function,
Light sensor
press the ON button (
). The indicator
light will illuminate.
(Type B)
Indicator light
OFF button
ON button
Light sensor
(Type B)
Press the ON/OFF button (
) to cancel the
auto-dimming function. The indicator light
will turn off.
3-32
Before Driving
Mirrors
(Without Homelink wireless control
system)
Light sensor
(With Homelink wireless control
system)
For information regarding the 3 buttons
(Type A
,
,
/Type B
,
,
)
on the auto-dimming mirror.
Refer to HomeLink Wireless Control
System on page 4-92.
The auto-dimming function is canceled
when the ignition is switched ON and
the selector lever is in the R position.
3-33
Before Driving
Windows
Power Windows
The windows can be opened/closed by operating the power window switches.
WARNING
Make sure the opening is clear before closing a window:
Closing a power window is dangerous. A person's hands, head, or even neck could be caught
by the window and result in serious injury or even death. This warning applies especially to
children.
Never allow children to play with power window switches:
Power window switches that are not locked with the power window lock switch would allow
children to operate power windows unintentionally, which could result in serious injury if a
child's hands, head or neck becomes caught by the window.
Make sure nothing blocks the window just before it reaches the fully closed position or while
fully holding up the power window switch:
Blocking the power window just before it reaches the fully closed position or while fully
holding up the power window switch is dangerous.
In this case, the jam-safe function cannot prevent the window from closing all the way. If
fingers are caught, serious injuries could occur.
NOTE
When driving with only 1 of the rear windows open, your ears might experience a
resonating sound. However, this does not indicate a problem. The sound can be reduced by
slightly opening a front window or by changing the size of the rear window opening.
3-34
Before Driving
Windows
Opening/Closing Windows
The window opens while the switch is pressed and it closes while the switch is pulled up
with the ignition switched ON. Do not open or close 3 or more windows at the same time.
The front passenger's side and rear windows can be opened/closed when the power window
lock switch on the driver's door is in the unlock position. Keep this switch in the locked
position while children are in the vehicle.
Master control switches
Locked position
Front passenger's
Power window
switch/ Rear window
Close
lock switch
switches
Driver's
Open
window
Close
Unlocked position
Left rear
window
Front passenger's
Open
window
Right rear window
NOTE
A power window may no longer open/close if you continue to press the switch after fully
opening/closing the power window. If the power window does not open/close, wait a
moment and then operate the switch again.
The passenger windows may be opened or closed using the master control switches on the
driver's door.
The power window can be operated for about 40 seconds after the ignition is switched
from ON to ACC or off with all doors closed. If any door is opened, the power window
will stop operating.
For engine-off operation of the power window, the switch must be held up firmly
throughout window closure because the auto-closing function will be inoperable.
When the power window lock switch is in the locked position, the light on each power
window switch, except for the driver's power window switch, turns off. The light may be
difficult to see depending on the surrounding brightness.
3-35
Before Driving
Windows
Auto-opening/Closing
Jam-safe Window
To fully open the window automatically,
If foreign matter is detected between the
press the switch completely down, then
window and the window frame while the
release. The window will fully open
window is closing automatically (refer to
automatically.
Auto-opening/Closing on page 3-36), the
To fully close the window automatically,
window stops closing and automatically
pull the switch completely up, then
opens partway.
release. The window will fully close
NOTE
automatically.
The jam-safe function may operate
To stop the window partway, pull or press
under the following conditions:
the switch in the opposite direction and
A strong impact is detected while the
then release it.
window is closing automatically.
NOTE
Window is closing automatically in
Power window system initialization
very low temperatures.
procedure
In the event the jam-safe function
If the battery was disconnected during
activates and the power window cannot
vehicle maintenance, or for other reasons
be closed automatically, pull and hold
(such as a switch continues to be operated
the switch and the window will close.
after the window is fully open/closed), the
The jam-safe window function does not
window will not fully open and close
operate until the system has been reset.
automatically.
The power window auto function will only
resume on a power window that has been
reset.
1. Switch the ignition ON.
2. Make sure that the power window lock
switch located on the driver's door is
not depressed.
3. Press the switch and fully open the
window.
4. Pull up the switch to fully close the
window and continue holding the
switch for about 2 seconds after the
window fully closed.
5. Make sure that the power windows
operate correctly using the door
switches.
3-36
Before Driving
Windows
Moonroof*
CAUTION
The moonroof can be opened or closed
¾ Do not sit on or put heavy items on the
when operating the overhead tilt/slide
area where the moonroof opens and
switch at the front seats.
closes. Otherwise, the moonroof could be
damaged.
WARNING
¾ Do not open or close the moonroof
forcefully during freezing temperatures
Do not let passengers stand up or extend
or snowfall. Otherwise, the moonroof
part of the body through the open
could be damaged.
moonroof while the vehicle is moving:
¾ The sunshade does not tilt. To avoid
Extending the head, arms, or other parts of
damaging the sunshade, do not push it
the body through the moonroof is
up.
dangerous. The head or arms could hit
¾ Do not close the sunshade while the
something while the vehicle is moving. This
moonroof is opening. Trying to force the
could cause serious injury or death.
sunshade closed could damage it.
Never allow children to play with the tilt/
Tilt/Slide Operation
slide switch:
The moonroof can be opened or closed
The tilt/slide switch would allow children to
electrically only when the ignition is
operate the moonroof unintentionally,
switched ON.
which could result in serious injury if a
child's hands, head or neck becomes
Before leaving the vehicle or washing
caught by the moonroof.
your Mazda, make sure the moonroof is
completely closed so that water does not
Make sure the opening is clear before
get inside the cabin area.
closing the moonroof:
After washing your Mazda or after it
A closing moonroof is dangerous. The
rains, wipe the water off the moonroof
hands, head, or even neck of a person,
before operating it to avoid water
especially a child, could be caught in it as it
penetration which could cause rust and
closes, causing serious injury or even death.
water damage to your headliner.
Tilt/Slide switch
Make sure nothing blocks the moonroof
just before it reaches the fully closed
position:
Blocking the moonroof just before it
reaches the closed position is dangerous.
In this case, the jam-safe function cannot
prevent the moonroof from closing. If
fingers are caught, serious injuries could
occur.
*Some models.
3-37
Before Driving
Windows
Tilt Operation
When the moonroof is already tilted open
and you want to slide it open, first close
The rear of the moonroof can be tilted
the moonroof and then do a slide
open to provide more ventilation.
operation.
To fully tilt automatically, momentarily
Open
press the tilt/slide switch.
To fully close automatically, momentarily
press the tilt/slide switch in the forward
direction.
To stop tilting partway, press the tilt/slide
switch.
When the moonroof is already slid open
Close
and you want to tilt it open, first close the
NOTE
moonroof and then do a tilt operation.
If the moonroof does not operate normally,
do the following procedure:
1. Switch the ignition ON.
2. Press the tilt switch, to partially tilt
open the rear of the moonroof.
3. Repeat Step 2. The rear of the
moonroof tilts open to the fully open
Tilt up
position, then closes a little.
Close (Tilt down)
If the reset procedure is performed while
the moonroof is in the slide position
Slide Operation
(partially open) it will close before the
To fully open automatically, momentarily
rear tilt opens.
press the tilt/slide switch in the backward
direction.
To fully close automatically, momentarily
press the tilt/slide switch in the forward
direction.
To stop sliding partway, press the tilt/slide
switch.
3-38
Before Driving
Windows
Jam-safe Moonroof
Sunshade
If a person's hands, head or an object
The sunshade can be opened and closed by
blocks the moonroof while it is closing,
hand.
the moonroof will stop and move in the
open direction.
The sunshade opens at the same time as
the moonroof slides open, but it must be
NOTE
closed by hand.
The jam-safe function may operate
Sunshade
under the following conditions:
A strong impact is detected while the
moonroof is closing automatically.
The moonroof is closing automatically
during very low temperatures.
In the event the jam-safe function
activates and the moonroof cannot be
closed automatically, press the tilt/slide
switch and the moonroof will close.
The jam-safe moonroof function does
not operate until the system has been
reset.
3-39
Before Driving
Security System
Modification and Add-On
Immobilizer System
Equipment
The immobilizer system allows the engine
to start only with a key the system
Mazda cannot guarantee the immobilizer
recognizes.
and the theft-deterrent systems' operation
if the system has been modified or if any
If someone attempts to start the engine
add-on equipment has been installed.
with an unrecognized key, the engine will
not start, thereby helping to prevent
CAUTION
vehicle theft.
If you have a problem with the
To avoid damage to the vehicle, do not
immobilizer system or the key, consult an
modify the system or install any add-on
Authorized Mazda Dealer.
equipment to the immobilizer and the
theft-deterrent systems or the vehicle.
CAUTION
¾ Radio equipment like this is governed by
laws in the United States.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's
authority to operate the equipment.
¾ To avoid damage to the key, do not:
¾ Drop the key.
¾ Get the key wet.
¾ Expose the key to any kind of magnetic
field.
¾ Expose the key to high temperatures
on places such as the dashboard or
hood, under direct sunlight.
¾ If the engine does not start with the
correct key, and the security indicator
light keeps illuminating or flashing, the
system may have a malfunction. Consult
an Authorized Mazda Dealer.
3-40
Before Driving
Security System
NOTE
Arming
The keys carry a unique electronic code.
The system is armed when the ignition is
For this reason, and to assure your
switched from ON to off.
safety, obtaining a replacement key
The security indicator light in the
requires some waiting time. They are
instrument cluster flashes every 2 seconds
only available through an Authorized
until the system is disarmed.
Mazda Dealer.
Always keep a spare key in case one is
lost. If a key is lost, consult an
Authorized Mazda Dealer as soon as
possible.
Disarming
If you lose a key, an Authorized Mazda
Dealer, will reset the electronic codes of
The system is disarmed when the ignition
your remaining keys and immobilizer
is switched ON with the correct
system. Bring all the remaining keys to
programmed key. The security indicator
the Authorized Mazda Dealer to reset.
light illuminates for about 3 seconds and
Starting the vehicle with a key that has
then turns off. If the engine does not start
not been reset is not possible.
with the correct key, and the security
indicator light remains illuminated or
Operation
flashing, try the following:
Make sure the key is within the
NOTE
operational range for signal transmission.
The engine may not start and security
Switch the ignition off, and then restart the
indicator light may illuminate or flash if
engine. If the engine does not start after 3
the key is placed in an area where it is
or more tries, contact an Authorized
difficult for the system to detect the
Mazda Dealer.
signal, such as on the dashboard or in
NOTE
the glove compartment. Move the key to
a location within the signal range,
If the security indicator light flashes
switch the ignition off, and then restart
continuously while you are driving, do
the engine.
not shut off the engine. Go to an
Signals from a TV or radio station, or
Authorized Mazda Dealer, and have it
from a transceiver or mobile telephone
checked. If the engine is shut off while
could interfere with your immobilizer
the indicator light is flashing, you will
system. If you are using the proper key
not be able to restart it.
and the engine fails to start, check the
Because the electronic codes are reset
security indicator light.
when the immobilizer system is repaired,
the keys are needed. Make sure to bring
all the keys to an Authorized Mazda
Dealer, so that they can be programmed.
3-41
Before Driving
Security System
NOTE
Theft-Deterrent System*
If the battery goes dead while the
If the theft-deterrent system detects an
theft-deterrent system is armed, the horn
inappropriate entry into the vehicle, which
will activate and the hazard warning
could result in the vehicle or its contents
lights will flash when the battery is
being stolen, the alarm alerts the
charged or replaced.
surrounding area of an abnormality by
sounding the horn and flashing the hazard
How to Arm the System
warning lights.
1.
Close the windows and the moonroof*
securely.
The system will not function unless it's
2.
Switch the ignition OFF.
properly armed. So when you leave the
3.
Make sure the hood, the doors, and the
vehicle, follow the arming procedure
trunk lid are closed.
correctly.
4.
Press the lock button on the transmitter
Operation
or lock the driver's door from the
outside with the auxiliary key.
System triggering conditions
The hazard warning lights will flash
The horn sounds intermittently and the
once.
hazard warning lights flash for about 30
The following method will also arm
seconds when the system is triggered by
the theft-deterrent system:
any one of the following:
Press the door-lock switch “
” while
any door is open and then close all of
Unlocking a door with the auxiliary key,
the doors.
door lock switch, or an inside door-lock
(With the advanced keyless function)
knob.
Press a request switch.
Forcing open a door, the hood or the
trunk lid.
The security indicator light in the
Opening the hood by operating the hood
instrument cluster flashes twice per
release handle.
second for 20 seconds.
Switching the ignition ON without using
the push button start.
If the system is triggered again, the lights
and horn will activate until the driver's
5.
After 20 seconds, the system is fully
door or the trunk lid is unlocked with the
armed.
transmitter.
NOTE
(With the advanced keyless function)
The lights and horn can also be
The theft-deterrent system can also be
deactivated by pressing the request switch
armed by activating the auto relock
on a door.
function with all the doors, the trunk lid
and the hood closed.
Refer to Transmitter on page 3-5.
3-42
*Some models.
Before Driving
Security System
The system will disarm if one of the
To Stop the Alarm
following operations takes place within
A triggered alarm can be turned off using
20 seconds after pressing the lock
any one of the following methods:
button:
Pressing the unlock button or the trunk
Unlocking any door.
button on the transmitter.
Opening any door.
Starting the engine with the push button
Opening the hood.
start.
Switching the ignition ON.
(With the advanced keyless function)
To rearm the system, do the arming
Pressing a request switch on the
procedure again.
doors.
When the doors are locked by pressing
Pressing the electric trunk lid opener
the lock button on the transmitter or
while the key is being carried.
using the auxiliary key while the
theft-deterrent system is armed, the
The hazard warning lights will flash twice.
hazard warning lights will flash once to
indicate that the system is armed.
To Turn Off an Armed System
An armed system can be turned off using
any one of the following methods:
Pressing the unlock button on the
transmitter.
Starting the engine with the push button
start.
(With the advanced keyless function)
Pressing a request switch on the
doors.
The hazard warning lights will flash twice.
NOTE
When the doors are unlocked by pressing
the unlock button on the transmitter while
the theft-deterrent system is turned off, the
hazard warning lights will flash twice to
indicate that the system is turned off.
3-43
Before Driving
Driving Tips
Break-In Period
Saving Fuel and Protection
No special break-in is necessary, but a few
of the Environment
precautions in the first 1,000 km (600
How you operate your Mazda determines
miles) may add to the performance,
how far it will travel on a tank of fuel. Use
economy, and life of the vehicle.
these suggestions to help save fuel and
Do not race the engine.
reduce CO2.
Do not maintain one constant speed,
Avoid long warm-ups. Once the engine
either slow or fast, for a long period of
runs smoothly, begin driving.
time.
Avoid fast starts.
Do not drive constantly at full-throttle or
Drive at lower speeds.
high engine rpm for extended periods of
Anticipate when to apply the brakes
time.
(avoid sudden braking).
Avoid unnecessary hard stops.
Follow the maintenance schedule (page
Avoid full-throttle starts.
6-4) and have an Authorized Mazda
Dealer perform inspections and
servicing.
Use the air conditioner only when
necessary.
Slow down on rough roads.
Keep the tires properly inflated.
Do not carry unnecessary weight.
Do not rest your foot on the brake pedal
while driving.
Keep the wheels in correct alignment.
Keep windows closed at high speeds.
Slow down when driving in crosswinds
and headwinds.
WARNING
Never stop the engine when going down a
hill:
Stopping the engine when going down a
hill is dangerous. This causes the loss of
power steering and power brake control,
and may cause damage to the drivetrain.
Any loss of steering or braking control
could cause an accident.
3-44

 

 

 

 

 

 

 

Content      ..     2      3      4      5     ..