Mazda Mazdaspeed 3 (2013 year). Instruction

qTransferring a call from a device

(mobile phone) to Hands-Free

Communication between devices (mobile
phone) can be switched to Bluetooth

Hands-Free.
Touch the

on-screen button.

qCall interrupt

A call can be interrupted to receive an
incoming call from a third party.
To switch to a new incoming call.
Touch the

on-screen button or press

the pick-up button on the steering wheel.

NOTE

After receiving a new incoming call, the
previous call is placed on hold.

Touch the

on-screen button or press

the hang-up button on the steering wheel to
refuse a call.

Switching between calls

Touch the

on-screen button or

press the pick-up button on the steering
wheel.

Three-way call function

Touch the

on-screen button.

qDTMF (Dual Tone Multi-

Frequency Signal) Transmission

This function is used when transmitting
DTMF via the Numerical Keypad. The
receiver of a DTMF transmission is
generally a home telephone answering
machine or a company's automated
guidance call center.

1. Touch the

on-screen button

after connecting to a home device or
service to display the tone transmission
screen.

2. Input the number using a numerical

keypad.

NOTE

If the DTMF code has two or more digits or
symbols, each one must be transmitted
individually.

qReceiving and Replying to

Messages (only MAP 1.0)

SMS (Short Message Service) messages,
MMS (Multimedia Messaging Service)
messages, and E-mail received by
connected devices can be downloaded,
displayed, and played (read by the
system).
Additionally, replies can also be made to
calls and messages in the received
messages.

Downloading messages

Up to 15 new messages can be
downloaded and displayed from a
connected device.

1. Touch the

on-screen tab.

2. Touch the

on-screen button.

NOTE

Messages that have not been read are
downloaded first.

Attached data is not downloaded.

Messages up to 160-bytes can be
downloaded.

A message list is created for each device.

If there are unread messages, the receive
icon is displayed.

If the connected device does not correspond
to MAP 1.0, the AT command is used to
download. The downloaded message
indicates that it is already read.

Downloading using the AT command may
not function depending on the connected
device.

6-152

Interior Comfort

Bluetooth® (Type B)

Receiving messages

When a device receives a message, a
message received notification is
displayed.
When the

on-screen button

is touched, the message is downloaded.

NOTE

To not display the message received
notification, turn on the Don't Disturb Me
function.

Displaying messages

1. Touch the

on-screen tab.

2. Touch the message you want to

display.

NOTE

Touch the

on-screen button to display

the next message, and press the
on-screen button to display the previous
message.

When the

on-screen button is

pressed, the message content is played
(read by the system).

Message playback

1. Touch the

on-screen tab.

2. Touch the message you want to have

played (read) back.

3. Touch the

on-screen button.

NOTE

To stop the message playback, touch the
on-screen button.

Calling a person who sent a message

Calls can be made to persons sending
SMS and MMS messages.

1. Touch the

on-screen tab.

2. Touch the message to which you want

to make a call.

3. Touch the

on-screen button.

NOTE

Calls cannot be made to persons who have
sent e-mail.

Replying to messages

Replies to received messages can be sent
by selecting from the stored preset
messages.

1. Touch the

on-screen tab.

2. Touch the message to which you want

to reply.

3. Touch the

on-screen button.

4. Select the sentence to be sent from the

preset messages.

5. Press the

on-screen button.

NOTE

The preset messages cannot be changed.

Erasing messages

Downloaded messages can be erased.

1. Touch the

on-screen tab.

2. Touch the message you want to erase.

3. Touch the

on-screen button.

4. Touch the

on-screen button.

NOTE

The messages stored in a device cannot be
erased.

qDon't Disturb Me function

A setting can be made to not notify you of
incoming phone calls and messages.

1. Touch the

on-screen tab.

2. Touch the

on-screen

button.

Interior Comfort

Bluetooth® (Type B)

6-153

3. To set, touch the

on-screen button

or the

on-screen button.

4. Touch the

on screen button.

NOTE

The following operations are possible even
when the Don't Disturb Me function is on.

Downloading messages

Downloading phone books

Downloading the incoming/outgoing call
record

Sending messages

qAudio Operation Using Voice

Recognition

Audio on/off, audio mode switching, and
audio operations can be done using voice
recognition.

NOTE

(When playing a USB or iPod)
When a track is selected using voice
recognition, the track list is set to VR Playlist.

Starting the audio

The audio can be started using voice
recognition.

1. Press the talk button.

2. Prompt:

“Ready”

3. Say: [Beep]

“Turn on audio”

4. Power to the audio is turned on.

Turning off the audio

1. Press the talk button.

2. Prompt:

“Ready”

3. Say: [Beep]

“Change mode”

4. Prompt:

“Available audio modes are:

AM, FM, FM1, FM2, Sirius, Sirius1,
Sirius2, Sirius3, USB, iPod,
Bluetooth

audio, Pandora

, CD,

AUX, Turn off audio

”

5. Say: [Beep]

“Turn off audio”

6. Power to the audio is turned off.

Switching modes

1. Press the talk button.

2. Prompt:

“Ready”

3. Say: [Beep]

“Change mode”

4. Prompt:

“Available audio modes are:

AM, FM, FM1, FM2, Sirius, Sirius1,
Sirius2, Sirius3, USB, iPod,
Bluetooth

audio, Pandora

, CD,

AUX, Turn off audio

”

5. Say: [Beep]

“XXX (Ex. “AM”) (audio

source)

”

6. The audio source is switched.

NOTE

CD, SIRIUS digital satellite radio, USB, iPod,
BT audio, and Pandora

modes cannot be

selected in the following cases:

SIRIUS digital satellite radio unit, USB
device, iPod, BT audio, or Pandora

unit is

not equipped on the audio system.

CD has not been inserted.

The AUX mode is locked out unless you
connect a commercially available portable
audio unit (such as an MP3 player) to the
auxiliary jack. Connect a portable audio unit
or similar product on the market to the
auxiliary jack to listen to music or audio over
the vehicle's speakers.

6-154

Interior Comfort

Bluetooth® (Type B)

Playing selected track numbers

(When playing a CD)
A desired track number on a CD can be
played using voice recognition.
Refer to Operating the Compact Disc
(CD) Player on page 6-80.

1. Press the talk button.

2. Prompt:

“Ready”

3. Say: [Beep]

“Play track”

4. Prompt:

“What track number would you like to
play?

”

5. Say: [Beep]

“XXX (Ex. “15”) (Track

number)

”

6. The selected track number is played.

Playing selected artist

(When playing a USB or iPod)
Tracks from a desired artist on a USB
device or iPod can be played using voice
recognition.
Refer to How to use USB mode (Type B)
on page 6-96.Refer to How to use iPod
mode (Type B) on page 6-104.

1. Press the talk button.

2. Prompt:

“Ready”

3. Say: [Beep]

“Play”

4. Prompt:

“Would you like to play by Artist,
Album, Playlist, or Genre?

”

5. Say: [Beep]

“Artist”

6. Prompt:

“What artist would you like to play?”

7. Say: [Beep]

“XXXXX... (Ex. “Michael”) (Artist
name)

”

8. The name spoken will be searched for

in the USB device or iPod.
If a contact is matched, go to Step 10.
If multiple contacts are matched, go to
Step 9.

9. Prompt:

“Would you like to play XXXXX...
(Choice 1)?

”

(Artist you would like to play)
Say: [Beep]

“Yes.” Then go to Step 10.

(Artist you do not want to play)
Say: [Beep]

“No.” Then go to Step 9.

(Maximum 3 times)

10. The tracks for the selected artist are

played.

Playing selected album

(When playing a USB or iPod)
The tracks from a desired album on a
USB device or iPod can be played using
voice recognition.
Refer to How to use USB mode (Type B)
on page 6-96.Refer to How to use iPod
mode (Type B) on page 6-104.

1. Press the talk button.

2. Prompt:

“Ready”

3. Say: [Beep]

“Play”

4. Prompt:

“Would you like to play by Artist,
Album, Playlist, or Genre?

”

5. Say: [Beep]

“Album”

6. Prompt:

“What album would you like to play?”

7. Say: [Beep]

“XXXXX... (Ex. “I am”)

(Album name)

”

Interior Comfort

Bluetooth® (Type B)

6-155

8. The name spoken will be searched for

in the USB device or iPod.
If a contact is matched, go to Step 10.
If multiple contacts are matched, go to
Step 9.

9. Prompt:

“Would you like to play XXXXX...
(Choice 1)?

”

(Album you would like to play)
Say: [Beep]

“Yes.” Then go to Step 10.

(Album you do not want to play)
Say: [Beep]

“No.” Then go to Step 9.

(Maximum 3 times)

10. The tracks from the selected album

are played.

Playing selected playlist

(When playing a USB or iPod)
The tracks from a desired playlist on a
USB device or iPod can be played using
voice recognition.
Refer to How to use USB mode (Type B)
on page 6-96.Refer to How to use iPod
mode (Type B) on page 6-104.

1. Press the talk button.

2. Prompt:

“Ready”

3. Say: [Beep]

“Play”.

4. Prompt:

“Would you like to play by Artist,
Album, Playlist, or Genre?

”

5. Say: [Beep]

“Playlist”

6. Prompt:

“What playlist would you like to
play?

”

7. Say: [Beep]

“XXXXX... (Ex. “My favorite”)
(Playlist name)

”

8. The name spoken will be searched for

in the USB device or iPod.
If a contact is matched, go to Step 10.
If multiple contacts are matched, go to
Step 9.

9. Prompt:

“Would you like to play XXXXX...
(Choice 1)?

”

(Playlist you would like to play)
Say: [Beep]

“Yes.” Then go to Step 10.

(Playlist you do not want to play)
Say: [Beep]

“No.” Then go to Step 9.

(Maximum 3 times)

10. The tracks from the selected playlist

are played.

Playing selected genre

(When playing a USB or iPod)
Tracks from a desired genre on a USB
device or iPod can be played using voice
recognition.
Refer to How to use USB mode (Type B)
on page 6-96.Refer to How to use iPod
mode (Type B) on page 6-104.

1. Press the talk button.

2. Prompt:

“Ready”

3. Say: [Beep]

“Play”

4. Prompt:

“Would you like to play by Artist,
Album, Playlist, or Genre?

”

5. Say: [Beep]

“Genre”

6. Prompt:

“What genre would you like to play?”

7. Say: [Beep]

“XXXXX... (Ex. “Rock”)

(Genre name)

”

6-156

Interior Comfort

Bluetooth® (Type B)

8. The name spoken will be searched for

in the USB device or iPod.
If a contact is matched, go to Step 10.
If multiple contacts are matched, go to
Step 9.

9. Prompt:

“Would you like to play XXXXX...
(Choice 1)?

”

(Genre you would like to play)
Say: [Beep]

“Yes.” Then go to Step 10.

(Genre you do not want to play)
Say: [Beep]

“No.” Then go to Step 9.

(Maximum 3 times)

10. Tracks from the selected genre are

played.

Scan

(When playing a Radio, Sirius satellite
radio, CD, or BT audio (AVRCP1.4))
The scan function for the radio, Sirius
satellite radio, CD and BT audio
(AVRCP1.4) can be launched using voice
recognition.
Refer to Operating the Radio on page
6-68.
Refer to Operating the Satellite Radio on
page 6-72.
Refer to Operating the Compact Disc
(CD) Player on page 6-80.
Refer to How to Use the Bluetooth®
Audio System on page 6-166.

1. Press the talk button.

2. Prompt:

“Ready”

3. Say: [Beep]

“Scan (or Scan Off)”

4. Scan is performed or stopped.

Mute

Muting of the audio can be done using
voice recognition.

1. Press the talk button.

2. Prompt:

“Ready”

3. Say: [Beep]

“Mute (or Mute Off)”

4. Mute is performed or stopped.

Track search

(When playing a CD, USB, iPod, BT
audio (AVRCP1.0/1.3/1.4))
The track up/down function can be run
using voice recognition.
Refer to Operating the Compact Disc
(CD) Player on page 6-80.
Refer to How to use USB mode (Type B)
on page 6-96.
Refer to How to use iPod mode (Type B)
on page 6-104.
Refer to How to Use the Bluetooth®
Audio System on page 6-166.

Track up

1. Press the talk button.

2. Prompt:

“Ready”

3. Say: [Beep]

“Next track”

4. The next track is played.

Track down

1. Press the talk button.

2. Prompt:

“Ready”

3. Say: [Beep]

“Previous track”

4. The previous track is played.

Folder search

(When playing BT audio (AVRCP1.4))
The folder up/down function can be run
using voice recognition.
Refer to How to Use the Bluetooth®
Audio System on page 6-166.

Folder up

1. Press the talk button.

Interior Comfort

Bluetooth® (Type B)

6-157

2. Prompt:

“Ready”

3. Say: [Beep]

“Next folder”

4. The next folder is played.

Folder down

1. Press the talk button.

2. Prompt:

“Ready”

3. Say: [Beep]

“Previous folder”

4. The previous folder is played.

Pause/Resume

(When playing a CD, USB, iPod, BT
audio (AVRCP1.0/1.3/1.4), Pandora

)

Refer to Operating the Compact Disc
(CD) Player on page 6-80.
Refer to How to use USB mode (Type B)
on page 6-96.
Refer to How to use iPod mode (Type B)
on page 6-104.
Refer to How to Use the Bluetooth®
Audio System on page 6-166.
Refer to How to Use Pandora® on page
6-168.

Pause

1. Press the talk button.

2. Prompt:

“Ready”

3. Say: [Beep]

“Pause”

4. Playback is paused.

Resume playback

1. Press the talk button.

2. Prompt:

“Ready”

3. (When playing a CD, USB, iPod, BT

audio (AVRCP1.0/1.3/1.4))
Say: [Beep]

“Resume”

(When playing Pandora

)

Say: [Beep]

“Play”

4. Playback is resumed.

Repeat

(When playing a CD, BT audio
(AVRCP1.4))
The repeat function can be run using
voice recognition.
Refer to Operating the Compact Disc
(CD) Player on page 6-80.
Refer to How to Use the Bluetooth®
Audio System on page 6-166.

(When playing a CD)

1. Press the talk button.

2. Prompt:

“Ready”

3. Say: [Beep]

“Repeat (or Repeat Off)”

4. Repeat is performed or stopped.

(When playing BT audio)

1. Press the talk button.

2. Prompt:

“Ready”

3. Say: [Beep]

“Repeat”

4. Prompt:

“Available repeat options are Track ,
Folder, and Off

”

5. Say: [Beep]

“XXXXX (Track, Folder or Off)”

6. If

“Track” is spoken, track repeat is

performed.
If

“Folder” is spoken, folder repeat is

performed.
If

“Off” is spoken, repeat is stopped.

Shuffle

(When playing a CD, BT audio
(AVRCP1.4))
The shuffle function can be run using
voice recognition.
Refer to Operating the Compact Disc
(CD) Player on page 6-80.

6-158

Interior Comfort

Bluetooth® (Type B)

Refer to How to Use the Bluetooth®
Audio System on page 6-166.

(When playing a CD)

1. Press the talk button.

2. Prompt:

“Ready”

3. Say: [Beep]

“Shuffle (or Shuffle Off)”

4. Shuffle is performed or stopped.

(When playing BT audio)

1. Press the talk button.

2. Prompt:

“Ready”

3. Say: [Beep]

“Shuffle”

4. Prompt:

“Available shuffle options are Folder ,
All, and Off

”

5. Say: [Beep]

“XXXXX (Folder, All or Off)”

6. If

“Folder” is spoken, folder shuffle is

performed.
If

“All” is spoken, device shuffle is

performed.
If

“Off” is spoken, shuffle is stopped.

Switching between display/non-display
of radio text information

(When playing FM Radio)

Switching between display/non-display of
radio text information is possible using
voice recognition.
Refer to Operating the Radio on page
6-68.

1. Press the talk button.

2. Prompt:

“Ready”

3. Say: [Beep]

“Radio text (or Radio text OFF)”

4. Radio text information is displayed/not

displayed.

Selection by specifying frequency

(When playing the Radio)

Selection by specifying the frequency is
possible using voice recognition.
Refer to Operating the Radio on page
6-68.

1. Press the talk button.

2. Prompt:

“Ready”

3. Say: [Beep]

“Frequency”

4. Prompt:

“What frequency would you like?”

5. Say: [Beep]

“XXX (Ex. 610) (Frequency)”

6. The specified frequency is selected.

Seek tuning function

(When playing the Radio)
Seek tuning can be run using voice
recognition.
Refer to Operating the Radio on page
6-68.

Seek up

1. Press the talk button.

2. Prompt:

“Ready”

3. Say: [Beep]

“Seek up”

4. Seek up is performed.

Seek down

1. Press the talk button.

2. Prompt:

“Ready”

3. Say: [Beep]

“Seek down”

4. Seek down is performed.

Interior Comfort

Bluetooth® (Type B)

6-159

Auto memory seek function

(When playing the Radio)
The auto memory seek function can be
run using voice recognition.
Refer to Operating the Radio on page
6-68.

1. Press the talk button.

2. Prompt:

“Ready”

3. Say: [Beep]

“Auto memory seek”

4. Auto memory seek is performed.

Auto memory preset function

(When playing the Radio)
Auto memory preset can be selected using
voice recognition.
Refer to Operating the Radio on page
6-68.

1. Press the talk button.

2. Prompt:

“Ready”

3. Say: [Beep]

“Auto memory preset”

4. Prompt:

“Number, please”

5. Say: [Beep]

“X (Ex. 3) (Preset number)”

6. The specified preset is selected.

Preset switching

(When playing the Radio, Sirius
satellite radio)
Radio stations programmed to the preset
can be selected using voice recognition.
Refer to Operating the Radio on page
6-68.
Refer to Operating the Satellite Radio on
page 6-72.

Specify the preset number and select

1. Press the talk button.

2. Prompt:

“Ready”

3. Say: [Beep]

“Preset”

4. Prompt:

“Say a preset number between 1 and 6”

5. Say: [Beep]

“X (Ex. 3) (Preset number)”

6. The specified preset is selected.

Next preset selection

(When playing the Radio)

1. Press the talk button.

2. Prompt:

“Ready”

3. Say: [Beep]

“Next preset”

4. The next preset is selected.

Previous preset selection

(When playing the radio)

1. Press the talk button.

2. Prompt:

“Ready”

3. Say: [Beep]

“Previous preset”

4. The previous preset is selected.

Switching channels

(When playing a Sirius satellite radio)
Selection of the channel to be received is
possible using voice recognition.
Refer to Operating the Satellite Radio on
page 6-72.

Select by specifying the channel
number

1. Press the talk button.

2. Prompt:

“Ready”

3. Say: [Beep]

“Channel”

4. Prompt:

“What channel number would you
like?

”

6-160

Interior Comfort

Bluetooth® (Type B)

5. Say: [Beep]

“XXX (Ex. 610) (Channel number)”

6. The specified channel is selected.

Selecting the next channel

1. Press the talk button.

2. Prompt:

“Ready”

3. Say: [Beep]

“Next channel”

4. The next channel is selected.

Selecting the previous channel

1. Press the talk button.

2. Prompt:

“Ready”

3. Say: [Beep]

“Previous channel”

4. The previous channel is selected.

Skip track function

(When playing Pandora

)

The skip track function can be run using
voice recognition.
Refer to How to Use Pandora® on page
6-168.

1. Press the talk button.

2. Prompt:

“Ready”

3. Say: [Beep]

“Skip Track”

4. The next track is skipped.

Thumbs up function

(When playing Pandora

)

The thumbs up function can be run using
voice recognition.
Refer to How to Use Pandora® on page
6-168.

1. Press the talk button.

2. Prompt:

“Ready”

3. Say: [Beep]

“Thumbs Up”

4. This tells Pandora

that you like this

track and helps to bring in more tracks
like it to your station.

Thumbs down function

(When playing Pandora

)

The thumbs down function can be run
using voice recognition.
Refer to How to Use Pandora® on page
6-168.

1. Press the talk button.

2. Prompt:

“Ready”

3. Say: [Beep]

“Thumbs Down”

4. This tells Pandora

not to play this

track.

Pandora

radio station selection

(When playing Pandora

)

A Pandora

radio station can be selected

using voice recognition.
Refer to How to Use Pandora® on page
6-168.

1. Press the talk button.

2. Prompt:

“Ready”

3. Say: [Beep]

“Station”

4. Prompt:

“Which Pandora

station you

would like?

”

5. Say: [Beep]

“XXXXX... (Ex. “90’s classic”)
(Station name)

”

6. The system searches for the announced

radio station.
If a contact is matched, go to Step 8.
If multiple contacts are matched, go to
Step 7.

Interior Comfort

Bluetooth® (Type B)

6-161

7. Prompt:

“Would you like to play XXXXX...
(Choice 1)?

”

(Station you would like to play)
Say: [Beep]

“Yes.” Then go to Step 8.

(Station you do not want to play)
Say: [Beep]

“No.” Then go to Step 7.

(Maximum 3 times)

8. The specified radio station is selected.

Bookmark function

(When playing Pandora

)

The bookmark function can be run using
voice recognition.
Refer to How to Use Pandora® on page
6-168.

1. Press the talk button.

2. Prompt:

“Ready”

3. Say: [Beep]

“Bookmark”

4. Prompt:

“Would you like to bookmark Track, or
artist?

”

5. Say: [Beep]

“Track (or Artist)”

6. Track or artist is bookmarked.

6-162

Interior Comfort

Bluetooth® (Type B)

Gracenote

End User License Agreement

This application or device contains software from Gracenote, Inc. of Emeryville, California
(

“Gracenote”). The software from Gracenote (the “Gracenote Software”) enables this

application to perform disc and/or file identification and obtain music-related information,
including name, artist, track, and title information (

“Gracenote Data”) from online servers

or embedded databases (collectively,

“Gracenote Servers”) and to perform other functions.

You may use Gracenote Data only by means of the intended End-User functions of this
application or device.
You agree that you will use Gracenote Data, the Gracenote Software, and Gracenote
Servers for your own personal non-commercial use only. You agree not to assign, copy,
transfer or transmit the Gracenote Software or any Gracenote Data to any third party. YOU
AGREE NOT TO USE OR EXPLOIT GRACENOTE DATA, THE GRACENOTE
SOFTWARE, OR GRACENOTE SERVERS, EXCEPT AS EXPRESSLY PERMITTED
HEREIN.
You agree that your non-exclusive license to use the Gracenote Data, the Gracenote
Software, and Gracenote Servers will terminate if you violate these restrictions. If your
license terminates, you agree to cease any and all use of the Gracenote Data, the Gracenote
Software, and Gracenote Servers. Gracenote reserves all rights in Gracenote Data, the
Gracenote Software, and the Gracenote Servers, including all ownership rights. Under no
circumstances will Gracenote become liable for any payment to you for any information
that you provide. You agree that Gracenote, Inc. may enforce its rights under this
Agreement against you directly in its own name.
The Gracenote service uses a unique identifier to track queries for statistical purposes. The
purpose of a randomly assigned numeric identifier is to allow the Gracenote service to
count queries without knowing anything about who you are. For more information, see the
web page for the Gracenote Privacy Policy for the Gracenote service.
The Gracenote Software and each item of Gracenote Data are licensed to you

“AS IS.”

Gracenote makes no representations or warranties, express or implied, regarding the
accuracy of any Gracenote Data from in the Gracenote Servers. Gracenote reserves the
right to delete data from the Gracenote Servers or to change data categories for any cause
that Gracenote deems sufficient. No warranty is made that the Gracenote Software or
Gracenote Servers are error-free or that functioning of Gracenote Software or Gracenote
Servers will be uninterrupted. Gracenote is not obligated to provide you with new
enhanced or additional data types or categories that Gracenote may provide in the future
and is free to discontinue its services at any time.
GRACENOTE DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND
NON-INFRINGEMENT. GRACENOTE DOES NOT WARRANT THE RESULTS THAT
WILL BE OBTAINED BY YOUR USE OF THE GRACENOTE SOFTWARE OR ANY
GRACENOTE SERVER. IN NO CASE WILL GRACENOTE BE LIABLE FOR ANY
CONSEQUENTIAL OR INCIDENTAL DAMAGES OR FOR ANY LOST PROFITS OR
LOST REVENUES.
© 2000 to present. Gracenote, Inc.

6-164

Interior Comfort

Bluetooth® (Type B)

Bluetooth® Audio

Applicable Bluetooth

specification

Ver. 2.0 or higher

Response profile

A2DP (Advanced Audio Distribution
Profile) Ver. 1.0/1.2

AVRCP (Audio/Video Remote Control
Profile) Ver. 1.0/1.3/1.4

A2DP is a profile which transmits only
audio to the Bluetooth

unit. If your

Bluetooth

audio device corresponds only

to A2DP, but not AVRCP, you cannot
operate it using the control panel of the
vehicle's audio system. In this case, the
Bluetooth

audio device can be operated

by controlling the device itself, the same
as when a portable audio system without
the Bluetooth

communication function is

connected to the AUX terminal.

Function

A2DP

A2DP·AVRCP

Ver.

1.0

Ver.

1.3

Ver.

1.4

Playback

―

Pause

―

File (Track)
up/down

―

Reverse

―

Fast-forward

―

Text display

―

Folder up/down

―

Repeat

―

Shuffle

―

Scan

―

X: Available

―: Not available

NOTE

To make sure that your Bluetooth

audio

device is Ver. 1.0, 1.3 or 1.4, refer to the
Owner's Manual for the Bluetooth

audio

device.

The battery consumption of Bluetooth

audio devices is higher while Bluetooth

connected.

If a general mobile phone device is USB
connected during music playback over the
Bluetooth

connection, the Bluetooth

connection is disconnected. For this reason,
you cannot have music playback over a
Bluetooth

connection and music playback

using a USB connection at the same time.

The system may not operate normally
depending on the Bluetooth

audio device.

qHow to Use the Bluetooth®

Audio System

Switching to Bluetooth

audio mode

To listen to music or voice audio recorded
to a Bluetooth

audio device, switch to

the Bluetooth

audio mode to operate the

audio device using the audio system
control panel. Any Bluetooth

audio

device must be programmed to the
vehicle's Bluetooth

unit before it can be

used.
Refer to Bluetooth® Preparation on page
6-143.

1. Switch the ignition to ACC or ON.

2. Turn on the Bluetooth

audio device's

power.
Make sure that the

“

” symbol is

displayed in the audio unit's display.

NOTE

Some Bluetooth

audio devices need a certain

amount of time before the

“

” symbol is

displayed in the audio unit's display.

6-166

Interior Comfort

Bluetooth® (Type B)

3. Press the audio button (

) and

then touch the

on-screen tab to

switch to the Bluetooth

audio mode

and start playback.

NOTE

If the Bluetooth

audio device does not

begin playback, press the

on-screen

button.

If the mode is switched from Bluetooth

audio mode to another mode (radio mode),
audio playback from the Bluetooth

audio

device stops.

Playback

1. To listen to a Bluetooth

audio device

over the vehicle's speaker system,
switch the mode to Bluetooth

audio

mode. (Refer to

“Switching to

Bluetooth

audio mode

”)

2. To stop playback, press the

on-

screen button.

3. Press the button again to resume

playback.

Selecting a file (track)

Selects the next file (track)

Short-press the track up button (

) or

touch the

on-screen button.

Selects the beginning of the current file
(track)

Short-press the track down button (

) or

touch the

on-screen button.

Fast-forward/Reverse (AVRCP Ver. 1.3
or higher)

Fast-forward

Press and hold the fast-forward button
(

) or touch and hold the

on-

screen button.

Reverse

Press and hold the reverse down button
(

) or touch and hold the

on-

screen button.

Folder search (only AVRCP Ver. 1.4)

To change to the previous folder, touch
the

on-screen button, or touch the

on-screen button to advance to the

next folder.

Music scan (only AVRCP Ver. 1.4)

This function scans the titles in a folder
currently being played and plays 10
seconds of each song to aid you in finding
a song you want to listen to.

1. Touch the

on-screen button

during playback to play 10 seconds of
each subsequent track starting from the
next song.

2. Touch the

on-screen button again

during playback of the song which you
want to listen to continue the playback
from that point.

Repeat playback (only AVRCP Ver. 1.4)

Track repeat

Touch the

on-screen button to play

the song during playback repeatedly.

“ ”

is displayed during playback.
Touch the

on-screen button two

times while

“ ” is displayed to cancel.

Folder repeat

Touch the

on-screen button two

times to play the songs in the folder
repeatedly.

“

” is displayed during

playback.
Touch the

on-screen button while

“

” is displayed to cancel.

Interior Comfort

Bluetooth® (Type B)

6-167

Mazda Mazdaspeed 3 (2013 year). Instruction - part 25