|
|
FRONT SUSPENSION REPAIRS 60-61 7. Fit pipe clamps to pipes, align clamps to chassis front cross member and fit bolts. 8. Valve block to reservoir pipe: Fit pipe to clip on LH chassis member. 9. Fit pipe clamp to pipes, align clamp to suspension turret and secure with nut. 10. Fit pipe clamp to pipes, align clamp to RH chassis member and secure with bolt. 11. Align and secure harness to suspension turret. hoses with clips. 13. Fit turbocharger outlet pipe and secure hoses with clips. 14. Connect turbocharger pressure sensing hose and secure with clip. 15. Fit 'O' ring to air cleaner. clips. 18. Connect multiplug to air flow meter. screws. 20. Fit viscous fan. COOLING SYSTEM - Td5, REPAIRS, 21. Fit RH splash shield and secure with screws. 24. Renew ACE high pressure filter 25. Lower vehicle. ADJUSTMENTS, Drain and refill. Pipe assembly - valve block to rear $% 60.60.33 CAUTION: The ACE hydraulic system is l ACE components are thoroughly cleaned l all opened pipe and module ports are l all fluid is stored in and administered Remove 1. Raise vehicle on a ramp. fluid spillage. 3. Remove 2 bolts securing 2 rear pipe clips to chassis. |