|
|
PRESSURE TEST Overdrive clutch Fourth gear only Pressure should be 469-496 kPa (68-72 psi) with closed throttle and increase to 620-896 kPa (90-130 psi) at 1/2 to 3/4 throttle. Line pressure (at accumulator) Closed throttle 372-414 kPa (54-60 psi). Front servo Third or Fourth gear only No more than 21 kPa (3 psi) lower than line pressure. Rear servo 1 range No more than 21 kPa (3 psi) lower than line pressure. R range 1103 kPa (160 psi) at idle, builds to 1862 kPa (270 psi) at 1600 rpm. Governor D range closed throttle Pressure should respond smoothly to changes in mph and return to 0-7 kPa (0-1.5 psi) when stopped with transmission in D, 1, 2. Pressure above 7 kPa (1.5 psi) at stand still will prevent transmission from downshifting. TORQUE SPECIFICATIONS DESCRIPTION N·m Ft. Lbs. In. Lbs. Fitting, cooler line at trans 18 13 - Bolt, torque convertor 31 - 270 Bolt, clevis bracket to crossmember 47 35 - Bolt, clevis bracket to rear support 68 50 - Bolt, driveplate to crankshaft 75 55 - Plug, front band reaction 17 13 - Locknut, front band adj. 34 25 - Switch, park/neutral 34 25 - Bolt, fluid pan 17 13 - Screws, fluid filter 4 - 35 Bolt, oil pump 20 15 - Bolt, overrunning clutch cam 17 13 - Bolt, O/D to trans. 34 25 - Bolt, O/D piston retainer 17 13 - Plug, pressure test port 14 10 - Bolt, reaction shaft support 20 15 - Locknut, rear band 41 30 - Bolt, speedometer adapter 11 - 100 Screw, vehicle speed sensor 2.5 - 21 Bolt, valve body to case 12 - 100 Sensor, trans speed 27 20 - Screw, solenoid wiring connector 4 - 35 Screw, solenoid to transfer plate 4 - 35 WG AUTOMATIC - 44RE 21s - 95 AUTOMATIC - 44RE (Continued) 2001 JEEP GRAND CHEROKEE |