Jeep Grand Cherokee WJ. Manual - part 453

 

  Index      Jeep     Jeep Grand Cherokee WJ - service repair manual 2001 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  451  452  453  454   ..

 

 

Jeep Grand Cherokee WJ. Manual - part 453

 

 

INPUT CLUTCHES

DESCRIPTION

Three hydraulically applied input clutches are used

to drive planetary components. The underdrive, over-
drive, and reverse clutches are considered input
clutches and are contained within the input clutch
assembly (Fig. 21) and (Fig. 22). The input clutch
assembly also contains:

• Input shaft

• Input hub

• Clutch retainer

• Underdrive piston

• Overdrive/reverse piston

• Overdrive hub

• Underdrive hub

OPERATION

The three input clutches are responsible for driving

different components of the planetary geartrain.

UNDERDRIVE CLUTCH

The underdrive clutch is hydraulically applied in

first, second, and third (direct) gears by pressurized
fluid against the underdrive piston. When the under-
drive clutch is applied, the underdrive hub drives the
input sun gear.

Fig. 21 Input Clutch Assembly-Part 1

21 - 194

45RFE AUTOMATIC TRANSMISSION

WJ

DESCRIPTION AND OPERATION (Continued)

OVERDRIVE CLUTCH

The overdrive clutch is hydraulically applied in

third (direct) and overdrive gears by pressurized fluid
against the overdrive/reverse piston. When the over-
drive clutch is applied, the overdrive hub drives the
reverse carrier/input annulus assembly.

REVERSE CLUTCH

The reverse clutch is hydraulically applied in

reverse gear by pressurized fluid against the over-
drive/reverse piston. When the reverse clutch is
applied, the reaction annulus gear is driven.

Fig. 22 Input Clutch Assembly-Part 2

WJ

45RFE AUTOMATIC TRANSMISSION

21 - 195

DESCRIPTION AND OPERATION (Continued)

HOLDING CLUTCHES

DESCRIPTION

Three hydraulically applied multi-disc clutches are

used to hold planetary geartrain components station-
ary while the input clutches drive others. The 2C,
4C, and Low/Reverse clutches are considered holding
clutches. The 2C and 4C clutches are located in the
4C retainer/bulkhead (Fig. 23), while the Low/Re-
verse clutch is located at the rear of the transmission
case (Fig. 24).

OPERATION

2C CLUTCH

The 2C clutch is hydraulically applied in second

gear by pressurized fluid against the 2C piston.
When the 2C clutch is applied, the reverse sun gear
assembly is held or grounded to the transmission
case by holding the reaction planetary carrier.

Fig. 23 2C and 4C Clutches

21 - 196

45RFE AUTOMATIC TRANSMISSION

WJ

DESCRIPTION AND OPERATION (Continued)

4C CLUTCH

The 4C clutch is hydraulically applied in fourth

gear by pressurized fluid against the 4C clutch pis-
ton. When the 4C clutch is applied, the reaction
annulus gear is held or grounded to the transmission
case.

LOW/REVERSE CLUTCH

The Low/Reverse clutch is hydraulically applied in

park, reverse, neutral, and first gears by pressurized
fluid against the Low/Reverse clutch piston. When
the Low/Reverse clutch is applied, the input annulus
assembly is held or grounded to the transmission
case.

Fig. 24 Low/Reverse Clutch

WJ

45RFE AUTOMATIC TRANSMISSION

21 - 197

DESCRIPTION AND OPERATION (Continued)

 

 

 

 

 

 

 

Content   ..  451  452  453  454   ..