Jaguar X-Type Sedan and Estate (Wagon). Manual - part 93

 

  Index      Jaguar     Jaguar X-Type Sedan and Estate (Wagon) (2.0 L, 2.5 L and 3.0 L Gasoline; 2.0 L and 2.2 L, Diesel) - manual 2001-2009 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  91  92  93  94   ..

 

 

Jaguar X-Type Sedan and Estate (Wagon). Manual - part 93

 

 

18. Attach the cruise control cable.

All vehicles

19. Attach the coolant expansion tank.

1. Reposition the coolant expansion tank.

2. Attach the coolant expansion tank.

20. Install the coolant expansion tank retaining bolt.

Tighten to 3 Nm.

21. NOTE: Remove the blanking plugs from the cooling system vent hoses
and the coolant expansion tank.

Attach the cooling system vent hoses to the coolant expansion tank.

22. Attach the brake fluid low level warning indicator wiring harness to the

coolant expansion tank.

23. Connect the brake fluid low level warning indicator electrical connector.

24. Check and top up the cooling system as required.

Vehicles with manual transmission

25. Bleed the clutch system.

For additional information, refer to: 

Clutch System Bleeding - Vehicles

W ith: 6-Speed Manual Transaxle - MMT6

 (308-00 Manual

Transmission/Transaxle and Clutch - General Information, General
Procedures).

Published: 11-May-2011

Power Brake Actuation - Brake Vacuum Pump2.0L NA V6 - AJV6

Removal and Installation

Removal

1. Disconnect the vacuum hose.

Release the retaining clip.

2. Disconnect the electrical connector.

3. Remove the vacuum pump.

Installation

1. To install, reverse the removal procedure.

Tighten to 25 Nm.

Published: 11-May-2011

Power Brake Actuation - Brake Vacuum Pump2.0L Duratorq-TDCi/2.2L Duratorq-TDCi
(110kW/150PS) - Puma

Removal and Installation

Special Tool(s)

Remover/Install, Cooling Hose Clamp

303-397

Removal

1. Remove the oil level indicator.

2. Remove the oil filler cap.

3. Remove the engine cover.

4. Drain the cooling system.

For additional information, refer to: 

Cooling System Draining, Filling and

Bleeding

 (303-03B Engine Cooling - 2.0L Duratorq-TDCi/2.2L

Duratorq-TDCi (110kW /150PS) - Puma, General Procedures).

5. Remove the air cleaner outlet pipe.

For additional information, refer to: 

Air Cleaner Outlet Pipe

 (303-12B

Intake Air Distribution and Filtering - 2.0L Duratorq-TDCi/2.2L
Duratorq-TDCi (110kW /150PS) - Puma, Removal and Installation).

 

 

 

 

 

 

 

Content   ..  91  92  93  94   ..