6A–2
ENGINE MECHANICAL
Piston and Connecting Rod
6A–77
. . . . . . . . . . . . . . .
Piston, Connecting Rod and Associate
Parts
6A–77
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disassembly
6A–77
. . . . . . . . . . . . . . . . . . . . . . . . . .
Inspection and Repair
6A–78
. . . . . . . . . . . . . . . . . .
Reassembly
6A–82
. . . . . . . . . . . . . . . . . . . . . . . . . .
Cylinder Block
6A–85
. . . . . . . . . . . . . . . . . . . . . . . . . .
Cylinder Block and Associated Parts
6A–85
. . . . .
Disassembly
6A–85
. . . . . . . . . . . . . . . . . . . . . . . . . .
Inspection and Repair
6A–86
. . . . . . . . . . . . . . . . . .
Reassembly
6A–87
. . . . . . . . . . . . . . . . . . . . . . . . . .
Main Data and Specification
6A–90
. . . . . . . . . . . . . .
Special Tool
6A–96
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Service Precaution
WARNING: IF SO EQUIPPED WITH A
SUPPLEMENTAL RESTRAINT SYSTEM (SRS),
REFER TO THE SRS COMPONENT AND WIRING
LOCATION VIEW IN ORDER TO DETERMINE
WHETHER YOU ARE PERFORMING SERVICE ON OR
NEAR THE SRS COMPONENTS OR THE SRS
WIRING. WHEN YOU ARE PERFORMING SERVICE
ON OR NEAR THE SRS COMPONENTS OR THE SRS
WIRING, REFER TO THE SRS SERVICE
INFORMATION. FAILURE TO FOLLOW WARNINGS
COULD RESULT IN POSSIBLE AIR BAG
DEPLOYMENT, PERSONAL INJURY, OR
OTHERWISE UNNEEDED SRS SYSTEM REPAIRS.
CAUTION: Always use the correct fastener in the
proper location. When you replace a fastener, use
ONLY the exact part number for that application.
ISUZU will call out those fasteners that require a
replacement after removal. ISUZU will also call out
the fasteners that require thread lockers or thread
sealant. UNLESS OTHERWISE SPECIFIED, do not
use supplemental coatings (Paints, greases, or other
corrosion inhibitors) on threaded fasteners or
fastener joint interfaces. Generally, such coatings
adversely affect the fastener torque and the joint
clamping force, and may damage the fastener. When
you install fasteners, use the correct tightening
sequence and specifications. Following these
instructions can help you avoid damage to parts and
systems.