|
|
|
141-2
POWER MIRRORS
(Refer to Section 201 for photographs.)
Component
Photo No.
Dash Fuse Box
Behind left dash side trim panel
55
. . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connector
D-3 (8-WHT)
In top of left front door
78
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
D-12 (8-WHT)
In top of right front door
78
. . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
H-18 (18-WHT)
Behind right dash side trim panel, in access hole
54
. . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
H-22 (18-WHT)
Behind left dash side trim panel, in access hole
54
. . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ground
B-26
Below rear of center console
67
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Circuit Operation
The two outside mirrors are controlled by the power mir-
ror switch. Each mirror has two reversible motors: one
motor moves the mirror up and down and the other mo-
tor moves the mirror left and right.
The door mirror switch has four switches to control mirror
direction, and two switches to select the left or right mir-
ror. The door selector switch directs voltage from the
direction switches to either the left or the right mirror.
Each direction switch is used for more than one function.
With the ignition in ACC or ON, battery voltage is sup-
plied to the mirror control switch through fuse C-11.
Mirror Up Operation
With the mirror control switch in the up position, switch 4
is moved to the B position. Switches 3 and 4 apply bat-
tery voltage to the left or right power mirror up/down mo-
tor as determined by the master selector switch. The
selected mirror motor is grounded through the master
selector switch and switch 1 in the A position to B-26.
Mirror Down Operation
With the mirror control switch in the down position,
switches 1, 2 and 3 are moved to the B position. Switch
1 applies battery voltage to the left or right power mirror
up/down motor as determined by the master selector
switch. The selected mirror motor is grounded through
switch 4 in the A position to B-26.
Mirror Left Operation
With the mirror control switch in the left position, switch
2 is moved to the B position. Switches 2 and 3 apply bat-
tery voltage to the left or right power mirror left/right mo-
tor as determined by the master selector switch. The
selected mirror motor is grounded through switch 1 in
the A position to B-26.
Mirror Right Operation
With the mirror control switch in the right position,
switches 1, 3, and 4 are moved to the B position. Switch
1 applies battery voltage through the master selector
switch to the left or right left/right motor. The motor is
grounded through the master selector switch and
switch 2 in the A position to B-26.
Fold and Return Movement
With the starter switch in ACC or ON, voltage is applied
through fuse C-11 to the mirror folding switch. When the
folding switch is pressed, voltage is applied through fold
switches (in the door mirrors) to the folding motors.
Ground is provided for the motors through the folding
switch to B-26. The left and right door mirrors move to-
wards the fold position. When the mirrors reach the fold
position, the fold switches (in the door mirrors) open, re-
moving voltage from the folding motors and they stop.
When the folding switch is pressed again, voltage is
applied through the folding switch to the opposite side
of the folding motors. Ground is provided from B-26
through the folding switch and the return switches (in
the door mirrors) to the folding motors. The left and right
door mirrors move towards the return position. When
the mirrors reach the return position, the return
switches (in the door mirrors) open and remove ground
from the motors and they stop.
Component Location Index
SEAT HEATER
Dash Fuse Box
Component Index
147
SEAT HEATER
WHT/BLU
HOT IN ON OR START
C-2
SEAT
HEATER
15A
DRIVER’S
SEAT
CUSHION
T-8
4
H-46
3
BLK/WHT
WHT/BLK
BLK
1
WHT
WHT
SB21
See Ground
Distribution,
page 14-5.
2
GRY/BLU
1
HEAT
KEEP
BLK
BLK
B-26
DRIV-
ER’S
SEAT
HEATER
SWITCH
DRIVER’S
SEAT
BACK
T-8
3
WHT/RED
WHT/RED
H-46
5
YEL/VIO
4
B-29
3
T-14
1
T-14
2
WHT
GRN/RED
B-29
2
GRN/RED
SB7
BLK
HEAT
KEEP
HEAT
KEEP
WHT/RED
GRN/RED
DASH
FUSE
BOX
BLK
T-16
T-16
ON
INDICATOR
Circuit Schematic
147-1
SEAT HEATER
RIGHT
FRONT
SEAT
CUSHION
T-10
4
H-47
3
BLK/WHT
WHT/BLK
BLK
1
WHT
WHT
2
BLU/PNK
1
HEAT
KEEP
BLK
RIGHT
FRONT
SEAT
HEATER
SWITCH
RIGHT
FRONT
SEAT
BACK
T-10
3
WHT/RED
WHT/RED
H-47
5
YEL/GRN
4
B-31
3
T-15
2
WHT
GRN/RED
B-31
2
HEAT
KEEP
HEAT
KEEP
WHT/BLU
T-15
1
WHT/RED
T-17
T-17
ON
INDICATOR
Circuit Schematic
|
|
|