|
|
DLK-210 < SYMPTOM DIAGNOSIS > SQUEAK AND RATTLE TROUBLE DIAGNOSES If the noise can be duplicated easily during the test drive, to help identify the source of the noise, try to dupli- vehicle body. CHECK RELATED SERVICE BULLETINS After verifying the customer concern or symptom, check ASIST for Technical Service Bulletins (TSBs) related LOCATE THE NOISE AND IDENTIFY THE ROOT CAUSE 1. Narrow down the noise to a general area. To help pinpoint the source of the noise, use a listening tool 2. Narrow down the noise to a more specific area and identify the cause of the noise by: • Removing the components in the area that is are suspected to be the cause of the noise. Do not use too much force when removing clips and fasteners, otherwise clips and fastener can be broken • Tapping or pushing/pulling the component that is are suspected to be the cause of the noise. Do not tap or push/pull the component with excessive force, otherwise the noise will be eliminated only tem- • Feeling for a vibration by hand by touching the component(s) that is are suspected to be the cause of the noise. • Placing a piece of paper between components that are suspected to be the cause of the noise. DLK-211, "Inspection Procedure" . REPAIR THE CAUSE • If the cause is a loose component, tighten the component securely. thane tape. A Nissan Squeak and Rattle Kit (J-43980) is available through the authorized Nissan Parts CAUTION: Never use excessive force as many components are constructed of plastic and may be damaged. × 135 mm (3.94 × 5.31 in)/76884-71L01: 60 × 85 mm (2.36 × 3.35 in)/76884- 71L02:15 × 25 mm (0.59 × 0.98 in) INSULATOR (Foam blocks) × 50 mm (1.97 × 1.97 in)/73982- 50Y00: 10 mm (0.39 in) thick, 50 × 50 mm (1.97 × 1.97 in) INSULATOR (Light foam block) × 50 mm (1.18 × 1.97in) FELT CLOTHTAPE × 25 mm (0.59 × 0.98 in) pad/68239-13E00: 5 mm (0.20 in) wide tape roll The following materials, not found in the kit, can also be used to repair squeaks and rattles. |