|
|
DLK-166 < DTC/CIRCUIT DIAGNOSIS > INTEGRATED HOMELINK TRANSMITTER INTEGRATED HOMELINK TRANSMITTER Component Function Check INFOID:0000000006256149 1. CHECK FUNCTION Check that system receiver (garage door opener, etc.) operates with original hand-held transmitter. YES >> GO TO 2. NO >> Receiver or hand-held transmitter is malfunctioning. 2. CHECK ILLUMINATE 1. Turn ignition switch OFF. 2. Does red light of transmitter illuminate when any transmitter button is pressed? Is the inspection result normal? YES >> GO TO 3. NO >> Refer to DLK-166, "Diagnosis Procedure" . 3. CHECK TRANSMITTER Check transmitter with Tool*. Is the inspection result normal? YES >> Receiver or hand-held transmitter malfunction, not vehicle related. NO >> Replace auto anti-dazzling inside mirror (integrated homelink transmitter). Diagnosis Procedure INFOID:0000000006256150 1. CHECK POWER SUPPLY 1. Turn ignition switch OFF. 2. Disconnect auto anti-dazzling inside mirror (integrated homelink transmitter) connector. 3. Check voltage between auto anti-dazzling inside mirror (integrated homelink transmitter) harness connec- Is the inspection result normal? YES >> GO TO 2. NO-1 >> Check 10 A fuse [No. 6 located in the fuse block (J/B)]. NO-2 >> Harness for open or short between fuse and auto anti-dazzling inside mirror (integrated homelink transmitter). 2. CHECK GROUND CIRCUIT Check continuity between auto anti-dazzling inside mirror (integrated homelink transmitter) harness connector Is the inspection result normal? YES >> GO TO 3. NO >> Repair or replace harness. (+) (–) Voltage (Approx.) Auto anti-dazzling inside mirror (Integrated homelink transmitter) Connector Terminal R25 6 Ground Battery voltage 10 Auto anti-dazzling inside mirror (Integrated homelink transmitter) Ground Continuity Connector Terminal R25 8 Existed |