Infiniti QX56 (Z62). Manual - part 367
DAS
U1506 SIDE RDR R CAN 1
DAS-505
< DTC/CIRCUIT DIAGNOSIS >
[BSW]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
U1506 SIDE RDR R CAN 1
DTC Logic
INFOID:0000000006223945
DTC DETECTION LOGIC
NOTE:
If DTC “U1506” is detected along with DTC “U1000”, or “U1507”, first diagnose the DTC “U1000” or “U1507”.
• Refer to
DAS-486, "ADAS CONTROL UNIT : DTC Logic"
• Refer to
DTC CONFIRMATION PROCEDURE
1.
PERFORM DTC CONFIRMATION PROCEDURE
1.
Start the engine.
2.
Turn the BSW system ON.
3.
Perform “All DTC Reading” with CONSULT-III.
4.
Check if the “U1506” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS”.
Is “U1506” detected as the current malfunction?
YES
>> Refer to
DAS-505, "Diagnosis Procedure"
NO
>> Refer to
GI-40, "Intermittent Incident"
.
Diagnosis Procedure
INFOID:0000000006223946
1.
CHECK SELF-DIAGNOSIS RESULTS
Check if “U1000” or “U1507” is detected other than “U1506” in “Self Diagnostic Result” of “ICC/ADAS”.
Is “U1000” or “U1507” detected?
YES-1 >> U1000 detected: Perform the CAN communication system inspection. Repair or replace the mal-
functioning parts. Refer to
DAS-486, "ADAS CONTROL UNIT : DTC Logic"
YES-2 >> U1507 detected: Refer to
NO
>> GO TO 2.
2.
CHECK SIDE RADAR RH SELF-DIAGNOSIS RESULTS
Check if any DTC is detected in “Self Diagnostic Result” of “SIDE RADAR RIGHT”.
Is any DTC detected?
YES
>> Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to
NO
>> Replace the ADAS control unit. Refer to
DAS-63, "Removal and Installation"
DTC
(On board dis-
play)
Trouble diagnosis name
DTC detecting condition
Possible causes
U1506
(153)
SIDE RDR R CAN CIR 1
ADAS control unit detects an error signal that is re-
ceived from side radar RH via ITS communication
Side radar RH