|
|
Content .. 1163 1164 1165 1166 ..
SEC-50 < BASIC INSPECTION > [WITH INTELLIGENT KEY SYSTEM] DIAGNOSIS AND REPAIR WORK FLOW 2. Reconnect parts or connectors disconnected during Diagnostic Procedure again after repair and replace- 3. Check DTC. If DTC is detected, erase it. >> GO TO 9. 9. FINAL CHECK When DTC is detected in step 2, perform DTC CONFIRMATION PROCEDURE again, and then check that the Does the symptom reappear? YES (DTC is detected)>>GO TO 7. >> INSPECTION END |